Abstract:The backfilling mining technology for multi-source coal-based solid waste (MCSW) aligns with the key challenges and emerging paradigms in the coal industry, aiming at intelligent and cleaner coal mining, high efficiency, and low carbon utilization. This research area has gained considerable attention and significance for promoting high-quality coal mining, low environmental impact, and sustainable development. In this study, a response surface experiment was designed with desulfurization gypsum (DG), gasification slag (GS), and furnace bottom slag (FBS) as factors to analyze the performance of backfill materials with varying compositions. Parameters such as bleeding rate, compactness, viscosity, setting time, and age strength were tested. An optimal composition of backfill materials was obtained, with a MCSW content exceeding 90 %, 28-day strength exceeding 2 MPa, initial setting time between 240 and 480 min, and final setting time ranging from 300 to 600 min. The investigation of the optimal materials involved characterizing the pore structure, microstructure, composition, and silica gel structure through techniques such as X-ray diffraction (XRD) and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS). Additionally, the study explored micro-interface structures and enhancement mechanisms. After 28 days of curing, the backfill with a composition of DG 0.3, FBS 0.2, GS 0.1 exhibited a compressive strength of 5.18 MPa, with an initial setting time as short as 140 min. This can be attributed to the precipitation of silica gel on the grain surface, which mitigated the segregation effect. The silica gel promoted inter-particle bonding and rapid viscosity, preventing particle settling. This method not only ensures the safe disposal of coal-based solid waste but also contributes to the coordinated development of coal resource exploitation, environmental protection, and reduced carbon footprint.

Study on Mixing Performance of Municipal Solid Waste (MSW) in Differential Density Fluidized Beds (Fbs)

Experimental Study and Simulation of Low-Temperature Gasification of Municipal Solid Waste in Circulated Fluidized Bed

Investigation on Particle Mixing Characteristics of Municipal Solid Wastes Fluidized Bed Incinerator

EXPERIMENTAL STUDY ON PARTICLE MOTION CHARACTERISTIC IN THE INTERNAL CIRCULATING FLUIDIZED BED

On the Furnace Design of Calculation of Circulating Fluidized Bed Boiler Fired Municipal Solid Waste

Numerical and Experimental Investigation on Co-Combustion Characteristics of Hydrothermally Treated Municipal Solid Waste with Coal in a Fluidized Bed

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Experimental Research of Pipe-Distributed MSW Fluidized Bed Incinerator

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Experimental Research on Fluidized Bed Combustion of Typical Municipal Solid Waste Components

Study on Drying and Combustion Process in Grate-Cfb Incinerator

Research on particle mixing in a fluidized bed

Effects of Blending Hydrothermally Treated Municipal Solid Waste with Coal on Co-Combustion Characteristics in A Lab-Scale Fluidized Bed Reactor

Computational Fluid Dynamics-Discrete Element Method Investigation of Solid Mixing Characteristics in an Internally Circulating Fluidized Bed

Life Cycle Assessment of Advanced Circulating Fluidized Bed Municipal Solid Waste Incineration System from an Environmental and Exergetic Perspective

Mixed-Combustion Characteristics and Reaction Kinetics of Municipal Sludge and Corn Straw in Micro-Fluidized Bed

Co-disposal kinetics and characteristics of sewage sludge and municipal solid waste incineration fly ash

Mass Balance Performance Of A 300mw Cfb Boiler Burning Blend Fuel With Different Mixing Ratio

Study on the fluidity and mechanical properties of multi-source coal-based solid waste (MCSW) filling material

Research on Mixing Character of Fluidized Bed Particles with Image Processing Technique

Particle-Scale Simulation of Solid Mixing Characteristics of Binary Particles in a Bubbling Fluidized Bed