Abstract:In recent years, oxy-fuel combustion in coal-fired plants has become one of the most promising technologies for carbon capture and storage (CCS). Compared with air-fired combustion, high concentrations of CO2 and H2O in the flue gas cause a remarkable change in the pulverized coal combustion and heat transfer characteristics in furnace. In this study, improved models for the gas radiative properties and chemical reaction mechanisms were incorporated into the computational fluid dynamics (CFD) code to simulate a 200 MWe tangentially fired utility boiler, which is expected to operate at full load under both conventional air-fired and oxy-fuel combustion. Different flue gas recycle patterns: dry recycle and wet recycle, were also investigated. The results indicate that, stable combustion is achieved by a compatible burner design in both air-fired and oxy-fuel combustion. In the oxy-fuel combustion, the flue gas peak temperature and wall heat flux decrease and high CO concentration appears in the burner region, resulted from higher heat capacity of CO2 and chemical effect of CO2 (Liu et al., 2003, Glarborg and Bentzen, 2008). Based on the comparison of the wet recycle and dry recycle, it shows the wet recycle has more advantages than dry recycle. This study indicates a slight increase in total heat transfer, when the oxygen concentration in oxidant increases from 23% to 29%, consistent with the results of Vattenfall and Callide pilot scale oxy-combustion plant. Thus, compared with air-fired combustion, the full load of a boiler may decrease by 5-10% under oxy-fuel combustion. (C) 2014 Elsevier Ltd. All rights reserved.

Numerical Simulation of the Combustion and Pollution Emissions from a 75/th Circulation Fluidized Bed Boiler of Power Plant

Numerical Simulation of Combustion and Pollution in a 330MW Opposed Firing Boiler

Study on coal combustion characteristics in a 350MW supercritical tangentially boiler

Numerical Investigation on Oxy-Combustion Characteristics of a 200 MWe Tangentially Fired Boiler

Numerical Simulation of Secondary Air Penetration Depth in a 300 MW Single-furnace Circulating Fluidized Bed Boiler

Numerical Simulation Of The Combustion Processes In A W-Shaped Boiler Furnace Under Different Operating Conditions

Numerical Simulation of Combustion Process for an 1000MW Ultra-Supercritical Boiler at Different Air Distribution Proportions

Numerical Simulation of O2／CO2 Recycled Flue Gas Combustion in a 300 MW Boiler

Simulation of Heat and Mass Transfer in a Moving Bed Part-fluidized Boiler

Numerical Simulation of the Flow and Combustion Processes in a Three-Dimensional, W-Shaped Boiler Furnace

Numerical Simulation of Combustion Process for a Slag Tapping Boiler

Numerical Simulation of Combustion in 35 t/h Industrial Pulverized Coal Furnace with Burners Arranged on Front Wall

Modeling of a 300 MW Circulating Fluidized Bed Boiler

Testing and Numerical Simulation of Temperature Field and Oxygen Field for CFB Boilers

Numerical Simulation of Combustion Characteristics of a Corner-tube Gas Boiler

Numerical Simulation of Gas-solid Hydrodynamics in a 600 MW Supercritical Circulating Fluidized Bed Boiler Furnace

Numerical Investigation of the Flow and Combustion in a Horizontal Circulating Fluidized Bed Boiler

STUDY ON NUMERICAL SIMULATION OF DECREASING NOx EMISSION FROM COAL-FIRED BOILERS BASED ON BFA AND OFA

Prediction on pulverized coal combustion process in the boiler using computer simulation

Numerical Investigation of Different Burner Arrangement on A Coal-Fired Boiler

Systematic numerical simulation and experimental study of gas-solid two-phase flow, heat transfer and combustion in W-shape flame boiler furnace