Abstract:The realization of the necessary energy-efficient technological solutions for the production of highly porous SiC-ceramic materials requires appropriate research. The results of developing energy-efficient one-step methods for the synthesis of porous SiC-based ceramics and studying the characteristics of the obtained ceramics are presented. The effect of the morphology of initial powders on the synthesized product is considered. Ultrafine silicon carbide powders of two types, identical in characteristic particle size, but quite different in the surface morphology, were used as fillers in the synthesis of experimental samples of porous ceramics. The first one was obtained by the traditional furnace method (SiC f ), the second one was synthesized by the technology of self-propagating high-temperature synthesis (SiC shs ). It is shown that the particle morphology of initial powder components determines the structural parameters and characteristics of synthesized porous ceramics. The pore space parameters (average pore size, specific surface area, equivalent hydraulic diameter, permeability, etc.) can vary significantly. Porous ceramic materials synthesized on the basis of SiC f have an open porosity of 47%, high liquid permeability (up to 2 mDarcy), overwhelming dominance of α-SiC phase, and a narrow pore distribution with an average pore size of about 1 μm. High open porosity (more than 58 %), highly developed nanostructured pore space surface with an area of more than 12 m 2 /g, and wider pore size distribution (average pore size — 140 nm) are observed in porous ceramic materials based on SiC shs . The obtained results can be used to improve energy-efficient synthesis technologies and methods for predicting the properties of highly porous SiC-based ceramic materials. This will make it possible to create highly porous SiC ceramics within a priory predicted limits of effective applicability for the processes of ultrafiltration or catalysis.

Two Kinds of Preparation Ways for Porous SiC Ceramics

Two kinds of preparations for porous SiC ceramics

Preparation of Macroporous SiC from Si and Wood Powder Using Infiltration-Reaction Process

Preparation of Porous SiC Ceramic Using Bamboo Charcoal and Silica Sol As Pore-Forming Agents

PREPARATION OF MACROPOROUS SiC FROM WOODCERAMICS AND SILICON POWDER BY IN SITU REACTION-SINTERING PROCESS

Biomorphic SiC Ceramics Prepared by Organic Template Method

Microstructure Transmissibility in Preparing Sic Ceramics from Natural Wood

Porous SiC Ceramic Prepared by Reactive Infiltration of Liquid Silicon into Woodceramics

Preparation and study of porous Si3N4 ceramics with high strength

Preparation and characterization of porous, biomorphic SiC ceramic with hybrid pore structure

Study of the effect of the morphology of initial powders on the structural and dimensional characteristics of SiC-based porous ceramic materials

Preparation of Porous Sic Ceramic with A Woodlike Microstructure by Sol-Gel and Carbothermal Reduction Processing

Microstructure Evolution Process of Porous Silicon Carbide Ceramics Prepared Through Coat-Mix Method

Preparation and Basic Properties of a New Porous SiC

A Novel Method for the Preparation of Porous SiC

Progress in Preparation and Properties of Porous Silicon Nitride Ceramics

PREPARATION OF POROUS SiC CERAMIC BY GASEOUS REACTIVE INFILTRATION METHOD

Preparation and Pore Structure Characteristics of SiC Honeycomb Ceramics with Macroporous Walls

Preparation and Properties of Porous Silicon Carbide Ceramics Through Coat-Mix and Composite Additives Process

Thermal Conductivity and Microstructure Properties of Porous SiC Ceramic Derived from Silicon Carbide Powder

Preparation of Porous SiC Ceramics Using Starch as Pore-forming Agent