Abstract:Using nickel nitrate as catalyst precursor, a cost effective method for large scale preparation of carbon nanotubes (CNTs) was investigated through catalytic pyrolysis of phenol resin in the temperature range of 600-1200 degrees C under an Ar atmosphere. The morphology and structure of pyrolysed resin were characterised by X-ray diffraction, scanning electron microscope, transmission electron microscope and energy dispersive X-ray spectroscopy. The results show that the morphology and structure of CNTs depend on pyrolysis temperature, and the starting growth temperature of CNTs is similar to 600 degrees C. When the pyrolysis temperature is raised, the length and crystallinity of CNTs increase remarkably. High aspect ratio and well crystallised CNTs with average diameter of about 50-60 nm and micrometer scale length could be obtained at 1000 degrees C. Scanning electron microscopy and transmission electron microscopy analysis reveals that the catalyst particle was located at the top of each CNT, which indicates the tip growth mechanism for CNTs. The growth process of CNTs will go through the following stages: decomposition of hydrocarbon components into the carbon atoms, dissolution, diffusion and segregation. The growth of CNTs agrees with vapour-solid (V-S) model.

The Effect of Pyrolysis Temperature on the Production of Muti-walled Carbon Nanotubes by CVD

Temperature effect on the preparation of MWNTs using thermal chemical vapor deposition

The effect of carbon nanotubes on the microstructure and morphology of pyrolytic carbon matrices of C–C composites obtained by CVI

Effect of pyrolysis temperature on properties of ACF/CNT composites

Identify the impact of pyrolysis temperature on preparation of carbon nanotubes by catalytic reforming polypropylene

Influence of Pyrolysis Temperature on the Growth of Y-junction Carbon Nanotubes

Effects of Oxygen on Multiwall Carbon Nanotubes Growth by PECVD

Effect of Carrier Gas on Quality of Cvd Synthesized Carbon Nano-Materials over High Performance Co/Mgmoo4 Catalyst

Nanostructured Hybrid Carbon Nanotube/UltraHigh‐Temperature Ceramic Heterostructures: Microstructure Evolution and Forming Mechanism

Thermogravimetric analysis and TEM characterization of the oxidation and defect sites of carbon nanotubes synthesized by CVD of methane

The Effect of Hydrogen on the Formation of Nitrogen-Doped Carbon Nanotubes Via Catalytic Pyrolysis of Acetonitrile

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Synthesis and Characterization of Multi-wall Carbon Nanotubes Using Innoxious Liquid Paraffin As Carbon Source

Influence of Mesoporous Materials on the Preparation of Carbon Nanotubes

Temperature and Catalyst Effects on the Production of Amorphous Carbon Nanotubes by a Modified Arc Discharge

Effects of Temperature and Catalyst Concentration on the Growth of Aligned Carbon Nanotubes

Preparation and Growth Mechanism of Carbon Nanotubes Via Catalytic Pyrolysis of Phenol Resin

Synthesis Of High Quality Single-Walled Carbon Nanotubes By Cvd And Effect Of Catalyst'S Acidity-Basicity On Nanotubes Growth

Synthesis of Multi-wall Carbon Nanotubes Using Fe/CNTs As Catalyst

Effect of the reaction atmosphere on the diameter of single-walled carbon nanotubes produced by chemical vapor deposition

Controllable growth of single wall carbon nanotubes by pyrolizing acetylene on the floating iron catalysts