Abstract:Abstract 1,3‐Dienes/styrene sequence‐controlled copolymers are widely used as thermoplastic elastomers, transparent impact resin and synthetic rubber and other materials. In this work, the binary anionic copolymerization of styrene ( S ) and C5‐dienes including 1,3‐pentadiene ( P , E / Z = 65/35) and isoprene ( I ) were studied in cyclopentyl methyl ether (CPME) ‘green’ solvent using n ‐BuLi as initiator, and the effects of copolymerization monomer ratio and polar additive (PA) on the copolymerization kinetics and monomer sequence distributions were investigated. The kinetic analysis results showed that all copolymerization systems were the first‐order reaction and the C5‐dienes/ S could be quantitatively consumed. The addition of S or I was conducive to the efficient conversion of P . Although the addition of PAs had little effect on the polymerization rate, it had a great influence on the microstructure and sequence distribution of the copolymer. 1 H NMR tracking analysis showed that, for S/P copolymerization with different feeding ratios 1/3 < f P < 2/3, the instant composition F P in the copolymer remained relatively constant at 15% < F P < 35% when the monomer conversion rate was below 60%, and thus the inevitable formation of P microblocks in subsequent polymerization sequences was observed. Additionally, similar sequence distributions were obtained in the case of I/P copolymerization systems. By contrast, S / I copolymerization conformed to the typical random copolymerization pattern, and the copolymerization activity of S was slightly higher than that of the I in CPME. The use of strong PAs such as 2,2‐di(2‐tetrahydrofuran)propane directly resulted in a change of monomer sequence from a random pattern to a gradual block pattern. Moreover, the 3,4‐isoprene branch units were much more sensitive to solvent and PA than 1,2‐pentadiene units for C5‐dienes; also Fourier transform infrared and DSC analysis verified the microstructure and sequence analysis results mentioned above. In addition, the results of gel permeation chromatography showed that the copolymerization process in CPME had excellent controllable characteristics. © 2023 Society of Industrial Chemistry.

Effect of Polar Regulators on Microstructure of Butadiene-Isoprene Rubber Prepared by N-Buli Initiated Solution Polymerization

Phase inversion during bulk copolymerization of N-phenylmaleimide/styrene in presence of polybutadiene (II): Effects of operation conditions and recipes on occurrence of phase inversion and structure of rubber phase

Effect of complex modifiers on polymerization kinetics and microstructure in synthesis of solution-polymerized styrene-butadiene rubber

Preparation of Triblock Copolymers with High &ITCis&IT-1,4-polybutadiene as Soft Segments

Studies on Anionic Continuous Solution Copolymerization of Butadiene/Styrene with N-Buli Initiator

Synthesis and Characterization of Linear-shaped and 3-Arm Star-shaped Hydroxyl-terminated Polybutadiene via Living Anionic Polymerization

Copolymerization Kinetics of Synthesis of Styrene and Butadiene Rubber Using Tetrahydrofufuryethylether As a Polar Modifier under the High Temperature

Synthesis of high vinyl solution polymerized styrene-butadiene rubber with three-peak distribution using mixed coupling agents

Synthesis of Styrene/isoprene/butadiene Integrated Rubber with Wide Glass Transition Temperature by Reactive Extrusion

Preparation and Dynamic Mechanical Properties of Copolymers Based on Butadiene, Isoprene, and Styrene

Synthesis of SIBR in the Presence of BuLi/ TMEDA

Sequence Structure of Butadiene-Isoprene Random Copolymer Synthesized by Anionic Polymerization

Styrene-Isoprene Copolymers with High Rubber Contents Prepared by Reactive Extrusion

Synthesis of Isotactic Polystyrene in Hydrocarbons by Initiation with T-Buli in the Presence of Sodium Dodecylbenzenesulfonate

Preparation of Triblock Copolymers with High Cis-1,4-polybutadiene as Soft Segments

Regulation effects of trans-1, 4-poly (isoprene-co-butadiene) copolymer on the processability, aggregation structure and properties of chloroprene rubber

Effects of liquid polyisoprene on microstructure and properties of natural rubber/polybutadiene rubber vulcanizates

Composition Effects on Thermodynamic Properties and Interfacial Structure in Styrene-Butadiene Rubber: A Combined Experimental and Simulation Study

The Effect of [pph3]/[ni] in the Synthesis of SBS Via Changing Catalytic Active Centers from A Novel Synthetic Strategy for Styrene–butadiene–styrene Tri-Block Copolymer with High Cis-1,4 Units Via Changing Catalytic Active Centres

Comparison of rheological properties among 1,2-polybutadiene,cis-1,4-polybutadiene rubber and styrene-butadiene rubber

Synthesis, kinetic study and characterization of C5 ‐dienes/styrene copolymers via living anionic polymerization in cyclopentyl methyl ether solvent