Abstract:Conventional horizontal twin-roll casting (TRC) with steel rollers generally possesses slow casting speed. In this study, the inclined TRC method with Cu rollers was proposed, which significantly increases the casting efficiency. A three-dimensional model of the inclined TRC was established, which revealed the temperature field, solid fraction, velocity distribution, and TRC microstructure of the AA6005 aluminum (Al) alloys by the finite element simulation. We considered the various effects of the pouring temperature, roll gap, and rolling speed on the outlet temperature of the inclined cast rolling zone, and determined the appropriate range of processing parameters. The casting speed of the inclined TRC process could reach ∼5.8–7.9 m/min when the roll gap was 2 and 3 mm. Due to the different contact areas between the melt and two rollers, the temperature field and the shape of the liquid hole were asymmetric, and the isotherm and solidification end point (Kiss point) shifted to the direction of the upper roller at the steady inclined TRC state. The columnar/equiaxed grain structure and the upper shift of central segregation in the inclined TRC sheets were successfully simulated by the finite element method, which was in good agreement with the experiments. Moreover, the inclined TRC method with Cu rollers has high cooling intensity and the potential to eliminate central segregation. The results of this study can effectively reduce the trial-and-error effort, and provide a new insight into the development of the TRC Al alloys.

Study on the External Cooling Mechanism of Aluminium's High-speed Cast-rolling Process

Study on External cooling system of speed cast-rolling of Aluminium strap

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Test Research for the External Cooling Interface Heat Transfer Coefficient of Rollers

Research on 3D Numerical Simulation and Experiment of Cutting Temperature for High Speed Milling of Aerospace Aluminum Alloy

Simulation of Heat Transfer Behavior of Shaped Interface in Aluminum Cast-Rolling Process

Theoretic Analysis and Experiment on Improving Heat Transfer Ability of Cast-Rolling System

Optimization of Temperature Distribution in Thick Slab Continuous Casting for Direct Hot Rolling

Effect of Alloying Elements and Processing Parameters on Microstructure and Properties of 1XXX Aluminium Alloys

Experimental Study on a Spray and Falling-Film Cooling System

Comparative study on effects of microstructures of hot rolled and twin roll casting 1235 aluminium alloy on surface quality of aluminium foils produced

Numerical Analysis of the Cooling System Performance and Effectiveness in Aluminum Low-Pressure Die Casting

Effect of the rolling speed on the flow field and solidification welding line of the roll casting for AZ31 magnesium alloy

Improved Mechanical Anisotropy and Texture Optimization of a 3xx Aluminum Alloy by Differential Temperature Rolling

Prediction on the solidification behavior of AA6005 aluminum alloys produced by inclined twin-roll casting: A finite element analysis

Thermal Analysis for Cooling Rolls in Planar-flow Melt Spinning

Study on Counter-Roller Spinning Technology of Large Diameter Aluminum Alloy Cylindrical Parts

Research on the Temperature and Thermal Stress of the Roll Quenching Process of Thin Plates

Flow and heat transfer in a novel convex cooling roller with axial variable boundary for planar flow casting

Microstructure of Aluminum Twin-Roll Casting Based on Cellular Automation

Coupled thermal-fluid-mechanics analysis of twin roll casting of A7075 aluminum alloy