BSP Development in IP-CATV Gateway

李芸,傅一恭,王匡,张明

DOI: https://doi.org/10.3969/j.issn.1002-8692.2004.02.008

2004-01-01

Abstract:This article introduces a new type of IP-CATV gateway model, presents the basic design idea and the system structure, and gives the detailed implementation of the IP-CATV gateway BSP driver under VxWorks.

What problem does this paper attempt to address?

Design and Implementation of the IP-CATV Gateway Driver under Vx Works

李芸,易志强,朱小富,王匡

DOI: https://doi.org/10.3969/j.issn.1007-7022.2003.11.015

2003-01-01

Abstract:This article introduces a new type of IP-CATV gateway model , presents the basic design idea , and gives the detailed implementation of the IP-CATV gateway driver under VxWorks.
Implementation of Nios Embedded System in IP-CATV/CATV-IP Gateway

Kuang Wang

2004-01-01

Abstract:In this article we provide a new model of IP-CATV/CAVT-IP gateway based on the Cyclone device and embedded soft processor Nios and introduce the conversion of IP data in Ethernet Network and TS data in CATV network by down broadcast transmission card based on Nios protocol stack and FPGA logic. Also we provide protocol stack model and FPGA logic timing.
An Implementation Scheme of Embedded IP Gateway Based on SOPC

LUO Wu,LIU An,LI Yi

DOI: https://doi.org/10.3969/j.issn.1003-3106.2007.10.004

2007-01-01

Abstract:A scheme of embedded IP gateway based on SOPC is proposed for wideband satellite data communication.HDLC(High-level Data Link Control Procedures)is one of the most widely used Data-Link layer protocols in satellite data communication system.A high-speed HDLC IP CORE is designed and implemented on a single chip and an embedded linux software environment is set up.Compared to common scheme,this scheme is more flexible and efficient.The throughput of this scheme is also higher.The design idea,key point and the structure of both hardware and software of the proposed scheme is presented.A prototype of this scheme is given and it is proved that this prototype has high performance.
A new VLSI design for Viterbi decoder based on ASIP

Zhiqiang Yi,Yuanxin Xu,Yun Li,Kuang Wang

DOI: https://doi.org/10.1109/ICCCAS.2002.1179065

2002-01-01

Abstract:Trellis Code Modulation (TCM) has been widely used because it can obtain 2.55∼7.37 dB coding gain without bandwidth expansion or reduction of the effective information rates. Since Viterbi decoder plays an important role in the realization of HDTV system, we conduct the research and development on integration of Viterbi decoder. This paper proposes a new VLSI design of Viterbi decoder using ASIPs based on hardware/software co-design idea. It reduces the total design time and enhances the reliability of VLSI. We have successfully used this method for the design of Viterbi decoder in the ASTC-HDTV receiver chip.
Design and Implementation of a Video on Demand System

Kuang Wang

2006-01-01

Abstract:This paper introduces a Video on Demand system based on both CATV broadcasting channels and IP interactive network. CATV broadcasting channels are used for content transmission and IP network is used for control information transmission between Set Top Box and Headend Server. The control mechanism of whole system is designed and implemented according to DSM-CC protocol stacks. The paper narrates the end-to-end system diagram and VoD application software of Set Top Box. The system can be used in CATV network and provide VoD services for CATV subscribers.
Design of DVB-C Mapping Circuit

包莉娜,梁坚,易志强,王匡

DOI: https://doi.org/10.3969/j.issn.1000-0755.2003.08.006

2003-01-01

Abstract:This paper focuses on the principles and method of mapping circuit in digital cable television(DVB-C),DVB-C System and implementation in ASIC(Applicatio n Specific Integrated Circuits)of DVB-C channel receiver.
Fastpath-based VPN Gateway over Network Processor

Bo Ji,Jinfang Zhou,Junda Zhu,Liping Qian

DOI: https://doi.org/10.1049/cp:20061251

2006-01-01

Abstract:Networks, along with the explosive growth of the Internet, developed quickly and make our lives more convenient and efficient. However, at the same time, people will face much more network security problems such as illegal observation, modification, IP Spoofing, etc. This article proposes a novel type of universal software architecture named Fastpath which is purposely designed and optimized for Network Element (NE) in the Next Generation Networks (NGN), under Linux. Furthermore, it illustrates the experience in developing IPSec-based VPN gateway over IXP425, and offloading IPSec processing to NPEs and coprocessors by using APIs of software AccessLibrary through Open Crypto Framework (OCF). Finally, we investigate the performance issues both internally and externally. Through the benchmarks, we analyze the performance of the system and identify that Fastpath and network processor together can construct a universal and high-functional platform for NE which focuses on network processing.
IP Gateway of Interactive Digital TV System

柳攀,薛永林,李凤亭

DOI: https://doi.org/10.3969/j.issn.1002-8692.2002.04.003

2002-01-01

Abstract:This paper introduces the scheme of IP gateway of Interactive Digital TV system,which is based on TCP/IP Protocols.It analyses the design from the hardware,driver,protocol translation,NAT respective ly.It also puts forward the structure of user-defined MPEG-2private data.
Design of DVB-IP Gateway Based on PICMG Specifications

罗传飞,孙军,周军

DOI: https://doi.org/10.3969/j.issn.1000-3428.2004.18.023

2004-01-01

Abstract:A specification and architecture with respect to an equipment which is critical to deploy SDTV and HDTV on broadband IP networks are presented . Its architecture is based on PICMG specification. So it has the advantages of flexibility and stability.
The Design, Performance Analysis and Implementation of VCAT in Backbone Networks for Software Radio System

Wang Peng,Jia Dong,Jin Depeng,Zeng Lieguang

2009-01-01

China Communications

Abstract:Software Radio is a kind of promising technology in today and future's communication systems. To share the resources of software radio systems to a large extent, we need to connect the instruments through backbone networks, such as the Multi-Service Transport Platform (MSTP), which is a dominating network technology that adopts both telecom and datacom traffic into existing transport infrastructures - Synchronous Digital Hierarchy (SDH). Virtual concatenation (VCAT) is one of the key technologies in MSTP. Compared with traditional contiguous concatenation, VCAT reduces transmission granularities, provides more flexibility to Network Management System (NMS) and as a result, improves the network efficiency greatly. In this paper, we introduce our design and implementation of VCAT module for a MSTP ASIC. The procedure of theoretical analysis to determine several important performance related parameters is also discussed in detail. The overall design has been thoroughly simulated and verified through our self-made FPGA board, and has been successfully applied in our MSTP ASICs. We believe our work is significant for future development of software radio technology.
RESEARCH AND IMPLEMENTATION OF SHUNT-STREAM GATEWAY IN INTEGRATED NETWORK

Xin-Song LIU,Ping DONG

DOI: https://doi.org/10.3969/j.issn.1000-1220.2001.01.012

2001-01-01

Abstract:At present, the organically integrated service broad-band network of CATV, phone and computer is in great demand. The shunt-stream gateway, researched and developed purposely by us, is used for downward transmission of video and data stream on one-way CATV network, and for upward transmission of voice information (eg. call messages from clients) on phone network. In realization, the corresponding part of the client end is embedded in the operating system, and the server ehd adds the shunt-stream gateway function. This paper describes the block-diagram, philosophy and main data structures.
Progrmming of a Device Driver for VxWorks

李立志,张朝阳,陈文正

DOI: https://doi.org/10.3969/j.issn.1000-3428.2003.04.073

2003-01-01

Abstract:After describing the real time operating system VxWorks in brief, this paper discusses how to write a VxWorks device driver in a general fashion including writing an character-specific device driver and block device driver . The non-standard interface device driver is also discussed here . Moreover , it discusses what device driver is needed to implement in a gateway project and their implementations.
Application of Webgis in Catv Basic Network

Li Zhao,Liu Nan,Liu Renyi,Bao Weizheng

DOI: https://doi.org/10.1117/12.713207

2006-01-01

Abstract:This paper analyzes the necessity of the application of WebGIS in CATV basic network. There was almost no research in using WebGIS to manage CATV basic network data in China. This paper briefly introduces how to construct an integrated transaction management system of CATV basic network based on WebGIS, and it forms a database of pivotal points, lines and buildings. CATV basic network based on WebGIS has very great superiority to traditional GIS, anybody can visit the system in anyplace by wired or wireless connection. Therefore it can satisfy the managers who want to query information about network, equipment and customers or response on. In this way the routine network and equipment maintenance becomes easily and fleetly. But WebGIS also has bottle-necks such as vector graphic editing. The editing of vector graphic and attribute play important roles in GIS, especially in CATV basic network management, because equipment, cable and fiber-optic change frequently. This paper develops Zhejiang Jiangshan broadcasting and TV station geographic information system on the basis of ArcIMS platform, and making use of the capability of reading and writing spatial data of ArcSDE to solve vector graphic editing problem.
The design and implementation of RTOS on CM-STB

Wen-zhi CHEN,Lie SHI

DOI: https://doi.org/10.3969/j.issn.1000-7024.2000.04.007

2000-01-01

Abstract:STB(Set Top Box)now becomes one of the most important user-interface devices.Its functions have updated from a simple multi-frequency tuner into an interactive information service platform.General network information service such as Internet WWW, Video on Demand, Email and Stock Exchanging Service are well provided to fulfill the need of real application. The design of STB involves hardware and software. This paper concerns the software, and discusses the RTOS (Real time Operation System),implemented by us, on CM-STB (Cable Medem Set-Top Box) in detail.
Spatial-Based Intelligent System for CATV Network Analysis

Zhenhong Du,Renyi Liu,Nan Liu,Yuanzheng Shao

DOI: https://doi.org/10.1109/ICINIS.2008.179

2008-01-01

Abstract:The design and application of intelligent system has become a hotspot in todaypsilas intelligent study. With the expansive application of intelligent system, the study on spatial-based CATV intelligent analysis receives a growing concern. Based on the analysis of the status quo and development of intelligent technologies, aiming at the characteristics of CATV network management, a three-tier distributed spatial information system with superior and subordinate (SAS) intelligent analyzer and statistic container is proposed in this paper. The system provided a good solution to realize spatial visualization management of CATV network analysis. The spatial-based system designed by this paper also has certain significance of reference to the design of other intelligent applications.
Design of Multi-access Residential Gateway Based on Intel IXP425

ZHAO Shengying,JIN Xinyu

DOI: https://doi.org/10.3969/j.issn.1000-3428.2007.12.088

2007-01-01

Abstract:This paper researches and discusses the home network and residential gateway, and analyzes the requirement from operator A multi-access residential gateway, Intel network processor IXP425 based system, is designed for telecom operator to spread. Complete solution and hardware/software architecture of system are described and the key module design is presented.
Design and implementation of a new kind of high-speed asynchronous serial interface

Dongliang Guan,Songyu Yu

2001-01-01

Abstract:The design and the implementation of a new kind of high-speed asynchronous serial interface (ASI) are introduced. Based on CY7B923 and CY7B933 of CYPRESS, cooperated with the EPLD and FIFO, the ASI realizes the sending and receiving of Mpeg-2 transport stream. It conforms to the DVB-ASI standard and realizes the Mpeg-2 transport stream delivery. The feature and the structure of ASI are first described. Then the hard ware architecture and the implementation of DVB-ASI are illustrated in detail. Finally the experimental results of DVB-ASI are presented. The DVB-ASI is successfully applied to the multi-program multiplexer, code stream generator, high definition encoder and decoder, which confirm its correctness and reliability.
Design and Implementation of an End-to-end System for DTV Multicasting to Home over Broadband IP Access Network

CF Luo,J Sun,HK Xiong

DOI: https://doi.org/10.1109/tbc.2005.846204

IF: 4.5

2005-01-01

IEEE Transactions on Broadcasting

Abstract:This paper describes design and implementation of an end-to-end system which implements digital television (DTV) multicasting to the home over broadband IP access network. We have developed a DTV-IP gateway for introducing DTV programs from broadcasting network into IP network with special considerations of the challenges, which consist of different service models and different protocols when deploying DTV services between the traditional satellite, cable or terrestrial network and the broadband IP network. According to different application scenario, the DTV-IP gateway can output two types of streams: CBR (constant bit-rate) transport stream (TS) over IP and VBR (variable bit-rate) TS over IP. Moreover, we have proposed a method to auto-regenerate the standard CBR TS from VBR TS over IP for the standard set-top-box (STB) with consideration of timing synchronization. This end-to-end system has been verified to work well in the broadband IP access network environment.
A Flexible VLSI Architecture of Transport Processor for an AVS HDTV Decoder SoC

Zhenrui Zhang,Di Wu,Peng Zhang,Don Xie,Wen Gao

DOI: https://doi.org/10.1109/tce.2006.273166

2006-01-01

IEEE Transactions on Consumer Electronics

Abstract:In this paper, we present a VLSI design of transport processor for an AVS HDTV decoder SoC. The design provides a flexible data flow, which supports both broadcasting service and IPTV service with DVR capability. The design is characterized by two-bus architecture, in which a RISC CPU is used for control of general purpose and some dedicated hardware for accelerating data processing. The common on-chip SRAM is used to store input transport packets and the intermediate result in order to improve system performance and reduce the area. The design is described in Verilog HDL, simulated with VCS simulator, and implemented using 0.18 mum CMOS cell library. The circuit costs about 75 k equivalent logic gates and the processing capability is up to 90 Mbps
DVB-CI Device Driver Development on Embedded Linux System

ZHOU Qing-xi,LIU Qiang

2005-01-01

Abstract:The method was introduced to encapsulate the detailed controls of the concrete DVB-CI device with device driver and provide the up-layer program an Abstract device on the embedded Linux system. A DVB-CI device driver based on MontaVista's Hard Hat Linux system and IBM STB02500 Set-Top Box Integrated Controller was implemented as an example.

BSP Development in IP-CATV Gateway

Design and Implementation of the IP-CATV Gateway Driver under Vx Works

Implementation of Nios Embedded System in IP-CATV/CATV-IP Gateway

An Implementation Scheme of Embedded IP Gateway Based on SOPC

A new VLSI design for Viterbi decoder based on ASIP

Design and Implementation of a Video on Demand System

Design of DVB-C Mapping Circuit

Fastpath-based VPN Gateway over Network Processor

IP Gateway of Interactive Digital TV System

Design of DVB-IP Gateway Based on PICMG Specifications

The Design, Performance Analysis and Implementation of VCAT in Backbone Networks for Software Radio System

RESEARCH AND IMPLEMENTATION OF SHUNT-STREAM GATEWAY IN INTEGRATED NETWORK

Progrmming of a Device Driver for VxWorks

Application of Webgis in Catv Basic Network

The design and implementation of RTOS on CM-STB

Spatial-Based Intelligent System for CATV Network Analysis

Design of Multi-access Residential Gateway Based on Intel IXP425

Design and implementation of a new kind of high-speed asynchronous serial interface

Design and Implementation of an End-to-end System for DTV Multicasting to Home over Broadband IP Access Network

A Flexible VLSI Architecture of Transport Processor for an AVS HDTV Decoder SoC

DVB-CI Device Driver Development on Embedded Linux System