Influence of Free Carbon Elimination on Microstructure and Properties of SiC Fibers

Cao Shi-Yi,Wang Jun,Wang Hao,Wang Xiao-Zhou
DOI: https://doi.org/10.15541/jim20150502
2016-01-01
Abstract:To prepare SiC fibers with different free carbon contents, polycarbosilane (PCS) fibers cured with unsaturated hydrocarbons were pyrolyzed at 1000 degrees C under controlled hydrogen/nitrogen atmosphere and subsequently heat treated at 1500 degrees C under nitrogen atmosphere. The process of carbon removal during pyrolysis was investigated using chemical elemental analysis, FTIR, and AES analysis. The microstructure and properties were examined by SEM, TEM, XRD, density measurements, tensile tests and resistivity measurements. The results show that the carbon content in SiC fibers decreases with H-2 concentration increasing. The hydrogen atmosphere suppresses H2 evolution and helps to remove excess carbon as CH4 during pyrolysis. Although thin carbon-enriched films are present on the fiber surfaces, the distribution of silicon and carbon is uniform in the fiber cores. The microstructure and properties of the resulting SiC fibers are very dependent on their C/Si chemical compositions. The beta-SiC grain size increases with a decrease in the carbon content because the excess carbon aggregates at the grain boundary and impedes the grain growth. Moreover, the removal of free carbon also results in fiber densification, decrease of porosity and improvement of fiber specific resistivity, tensile strength and tensile modulus. Therefore, the nearly stoichiometric SiC fiber has good comprehensive performance.
What problem does this paper attempt to address?