Abstract:Abstract The Gas Electron Multiplier (GEM) is a new age detector, which can handle the high flux of particles. The GEM foil, which is constructed using 50 μm highly insulating foil (Kapton/Apical) coated with 5 μm layers of copper, on both sides, with a network of specifically shaped holes is the major component of these detectors. The European Center for Nuclear Research (CERN) has been the sole supplier of the GEM foils until recently when a few other companies started manufacturing GEM foils under the transfer of technology (TOT) agrement from CERN. Techtra is one such company in Europe which gained a right to use CERN developed technology in order to produce commercially viable GEM foils. Micropack Pvt. Ltd. is another company in India which has successfully manufactured good quality GEM foils. Due to the microscopic structure of holes and dependence on the electric field inside, it becomes essential to study the defect and uniformity of holes along with the electrical property of foils under ambient conditions. In this work we are reporting the tests condition of Techtra GEM foils. We report on the development of a cost effective and efficient technique to study the GEM foils holes geometry, distribution, and defects. We also report on the electrical properties of these foils like leakage current, stability, and discharges. At the detector level, we describe the high voltage (HV) response, gain, uniformity, and stability. The GEMs have been proposed to have a wider applications, so we performed a feasibility study to utilize these for the imaging. We irrediated various objects of varying density with X-rays and reconstructed the images. The reconstructed image shows a good distinction between materials of different densities, which can be very useful in various applications like medical imaging or cargo imaging.

Non-uniformity Effects of the Inter-Foil Distance on GEM Detector Performance

The Influence of Gem Readout Detector Gain on the Spatial Resolution of A Gem-Tpc Prototype

A Practical Method to Determine the Spatial Resolution of Gem Detector

Experimental Study on the Performance of Tri-GEM Gas Detector

Impact of Single-Mask Hole Asymmetry on the Properties of GEM Detectors

Spatial resolution improvements with finer-pitch GEMs

Performance Study of a GEM-TPC Prototype Using Cosmic Rays

Determination of charge spread, position resolution, energy resolution and gain uniformity of Gas Electron Multipliers (GEM)

Study on the performance of a high-gain gas electron multiplier-MicroMegas chamber

Investigation on the performance of a thick ceramic gas electron multiplier

Progress on large area GEMs

Effect of hole geometry on charge sharing and other parameters in GEM-based detectors

The qualification of GEM detector and its application to imaging

Investigation of the Thickness Non-Uniformity of the Very Thin Silicon-Strip Detectors

Performance of the triple GEM detector built using commercially manufactured GEM foils in India

Performance of a triple-GEM detector with capacitive-sharing 3-coordinate (X-Y-U)-strip anode readout

Stability tests performed on the triple GEM detector built using commercially manufactured GEM foils in India

Development of a double-GEM detector using the self-stretching technique for digital hadron calorimetry

Studies on ion back-flow of Time Projection Chamber based on GEM and anode wire grid

Study of Gas Properties for GEM-Based TPC

First results of spherical GEMs