Abstract:Abstract The Gas Electron Multiplier (GEM) is a new age detector, which can handle the high flux of particles. The GEM foil, which is constructed using 50 μm highly insulating foil (Kapton/Apical) coated with 5 μm layers of copper, on both sides, with a network of specifically shaped holes is the major component of these detectors. The European Center for Nuclear Research (CERN) has been the sole supplier of the GEM foils until recently when a few other companies started manufacturing GEM foils under the transfer of technology (TOT) agrement from CERN. Techtra is one such company in Europe which gained a right to use CERN developed technology in order to produce commercially viable GEM foils. Micropack Pvt. Ltd. is another company in India which has successfully manufactured good quality GEM foils. Due to the microscopic structure of holes and dependence on the electric field inside, it becomes essential to study the defect and uniformity of holes along with the electrical property of foils under ambient conditions. In this work we are reporting the tests condition of Techtra GEM foils. We report on the development of a cost effective and efficient technique to study the GEM foils holes geometry, distribution, and defects. We also report on the electrical properties of these foils like leakage current, stability, and discharges. At the detector level, we describe the high voltage (HV) response, gain, uniformity, and stability. The GEMs have been proposed to have a wider applications, so we performed a feasibility study to utilize these for the imaging. We irrediated various objects of varying density with X-rays and reconstructed the images. The reconstructed image shows a good distinction between materials of different densities, which can be very useful in various applications like medical imaging or cargo imaging.

Effect of hole geometry on charge sharing and other parameters in GEM-based detectors

Charge sharing in single and double GEMs

Determination of charge spread, position resolution, energy resolution and gain uniformity of Gas Electron Multipliers (GEM)

Study of charging up effect in a triple GEM detector

Impact of Single-Mask Hole Asymmetry on the Properties of GEM Detectors

Investigation of the stability in the performance of triple GEM detectors for High Energy Physics experiments

The qualification of GEM detector and its application to imaging

Study of Gas Electron Multiplier Detector Using ANSYS and GARFIELD$^{++}$

Fast simulation of avalanche and streamer in GEM detector using hydrodynamic approach

Stability tests performed on the triple GEM detector built using commercially manufactured GEM foils in India

Performance of the triple GEM detector built using commercially manufactured GEM foils in India

Numerical simulation of charging up, accumulation of space charge and formation of discharges

Observation on the bias current variation of a single mask triple GEM chamber

Spatial resolution improvements with finer-pitch GEMs

Development of Micro-Pattern Gaseous Detectors for Nuclear Reaction Studies

Simulations of Multi-layer GEM Systems from Single to Quadruple GEMs

Signal Formation in THGEM-like Detectors

New Developments and Future Perspectives of Gaseous Detectors

Gas electron multipliers with metal electrodes and their applications in detectors

GEMs with Double Layred Micropattern Electrodes and their Applications