Abstract:This article investigates the transformation behavior of the glassy phase and crystalline phase in MnO–SiO2–Al2O3–MgO inclusions during heat treatment. The results show that the diffusion of elements in inclusions during heat treatment promotes the crystallization of the glassy phase, the growth of the crystalline phase and the change of crystal type. This study provides the theoretical basis for inclusion plasticization. To clarify the transformation of the glassy and crystalline inclusions in cord steel during heat treatment, four groups of MnO–SiO2–Al2O3 systems with different MgO contents are designed to obtain samples with both glassy and crystalline inclusions by slow‐cooling, and then the samples are isothermal held at 1100 °C for 120 min. The results of X‐ray diffraction and scanning electron microscope and energy dispersive spectrometer indicate that after isothermal holding, the MgMnSiO4 crystalline phase transforms into MgAl2O4 and MnSiO3 phases in 5 wt% MgO system, while partial MgMnSiO4 phase transforms into MgSiO3 phase in 10 wt% MgO system. Besides, the MgMnSiO4 crystalline phase transforms into MgSiO3 and Mg2SiO4 phases in 15 wt% MgO system, while the Mg2SiO4 crystalline phase partially transforms into MgSiO3 phase in 20 wt% MgO system. Combined with the calculation results of FactSage 8.1, it shows that the higher the MgO content in the system, the stronger the crystallization ability and the easier the formation of the crystalline phase. During the isothermal holding process, the elements in inclusions continuously diffuse and migrate, so that the glassy phase transforms into crystalline phase, while the crystalline phase grows further and the internal glassy phase disappear, accompanied by the transformation of the crystal type.

Evolution of Al2O3 Inclusions by Magnesium Treatment in H13 Hot Work Die Steel

Influence of magnesium treatment on inclusions and primary carbides in As-cast H13 die steel

Evolution Mechanism of Inclusions in H13 Steel with Rare Earth Magnesium Alloy Addition

Effect of Mg Treatment on the Evolution of Inclusions in M50 Aerospace Bearing Steel Under Different S/O Ratio Conditions

Evolution of Inclusions and Associated Microstructure in Ti–Mg Oxide Metallurgy Steel

Influence of the MgO grade in MgO‐C refractory material and steel melt temperature on the inclusion population in Al‐treated steel

Effect of Cooling Conditions on the Size and Morphology Evolution of MgAl2O4 Inclusions in Al‐Deoxidized Steel Coupling with Mg Treatment

Inclusion Evolution Behavior of Ti-Mg Oxide Metallurgy Steel and Its Effect on a High Heat Input Welding HAZ

Effect of trace Si on MgO·Al2O3 inclusion in ultra-low-carbon steel

Evolution mechanism of inclusions during refining and continuous casting process of 321H stainless steel

Effect of Rare Earth–Magnesium Alloy on Inclusion Evolution in Industrial Production of Die Steel

Effect of Al Content on the Agglomeration Behavior of Inclusions in High Al Steel

Study on the thermodynamic stability and evolution of inclusions in Al–Ti deoxidized steel

The Effect of Aluminum Addition on the Evolution of Inclusions in an Aluminum-Killed Calcium-Treated Steel

Effects of Calcium Addition on Nonmetallic Inclusions in High‐Al Steel

Effect of calcium treatment on evolution of inclusions in low-carbon aluminum-killed steel

Study on Transformation of Glassy and Crystalline Inclusions in Cord Steel during Heat Treatment at 1100 °C

Characteristics and Evolution of Inclusions in Ti‐Bearing Peritectic Steel with Mg Treatment

Evolution of MnO–SiO2–Al2O3–MgO inclusions during heat treatment at 1100 °C

Formation and Removal Mechanism of Nonmetallic Inclusions in 42CrMo4 Steel during the Steelmaking Process

Effect of Calcium Addition on Oxide and Sulfide Inclusions in Heavy Steel Ingot Simulated by Lab Experiments