Abstract:The interaction between irradiation defects and dislocations could lead to macroscopic hardening and embrittlement. In this study, molecular dynamics (MD) and machine learning were conducted to study three-dimensional void- and Cu-cluster-induced kinetics models under interaction with dislocations in body-centered cubic Fe-based alloys. MD Results show that dislocation climb and shear are two types of interaction mechanism based on the defect size. Combined MD results and machine learning, it was found that the dislocation length increased linearly with an increase in the size of the defects after the interaction. In addition, the number of atoms in the Cu-rich cluster and the reduced number of vacancies in the voids had a square relationship with the defect size where 0.85D2 is for Cu-rich cluster and 0.50D2 is for void. Furthermore, atomic-scale three-dimensional irradiation-induced defect kinetics models were developed and incorporated into the crystal plasticity finite element model (CPFEM). We also analyzed the contributions of various defects to the increase in the yield stress during CPFEM simulation. Compared with DBH model, the prediction of MD data-driven CPFEM matches better with the experimental data. Cluster contributed the most to hardening with low obstacle strength due to the higher number density compared with dislocation loops and voids. The loops also contributed to hardening; however, their contribution was smaller than that of the clusters. Although the number density and size of voids were minimized, they may have contributed because of the high obstacle strengths. This work can indeed deepen the understanding of irradiation effect in Fe-based alloys.

In Situ Study of Heavy Ion Irradiation Response of Immiscible Cu/Fe Multilayers

Enhanced radiation tolerance in immiscible Cu/Fe multilayers with coherent and incoherent layer interfaces

Defect-interface Interactions in Irradiated Cu/Ag Nanocomposites

Interaction of Irradiation Defects with Precipitates in CuCrZr and Cu-1Fe Alloys

Metastable Phase Formation in the FeCu System by Ion Irradiation and Solid State Interdiffusion

In Situ Studies on the Irradiation-Induced Twin Boundary-Defect Interactions in Cu

In Situ Studies on Twin-Thickness-Dependent Distribution of Defect Clusters in Heavy Ion-Irradiated Nanotwinned Ag

Investigation of Interactions Between Defect Clusters in Stainless Steels by in Situ Irradiation at Elevated Temperatures

Radiation Tolerance of Cu/W Multilayered Nanocomposites

Atomic-Scale Three-Dimensional Irradiation-Induced Defect Kinetics Models for Bcc Fe-Based Alloys

Irradiation-induced Alloying in Immiscible Mo–Cu System Through Multilayer Technique

Interstitial Migration Behavior and Defect Evolution in Ion Irradiated Pure Nickel and Ni-xFe Binary Alloys

Defect Evolution in Heavy Ion Irradiated Nanotwinned Cu with Nanovoids

An in Situ Study on Kr Ion–irradiated Crystalline Cu/amorphous-CuNb Nanolaminates

In situ study on heavy ion irradiation induced microstructure evolution in single crystal Cu with nanovoids at elevated temperature

In Situ Analysis of Multiphase Compounds at the Liquid Al-Solid Cu Interface: Formation Sequence, Growth Kinetics and Critical Thickness

Metastable Phases Induced by Ion Irradiation in the Equilibrium Immiscible Fe–Cu System

Enhanced Defect Annihilation Capability of the Graphene/copper Interface: an in Situ Study

Interface asymmetry and phase transformation of the Cu layer-inserted Al/Cu/Ni/Cu multilayers

In situ studies on radiation tolerance of nanotwinned Cu

Modification of Fe/Cu Multilayers under 2-Mev Xe$^{20+