Abstract:Polystyrene (PS) is a widely used building insulation material with good mechanical strength and strong temperature adaptability. However, PS itself is highly flammable and displays poor flame retardancy. At present, building fires caused by organic external wall thermal insulation materials prepared from PS represent a new fire hazard. In this study, the addition of an intumescent flame retardant (IFR) to reduce the flammability of PS was achieved. Using melamine (MEL), acrylonitrile-styrene-acrylate (ASA), and phytic acid (PA) as raw materials, a new type of flame retardant (MAP) was prepared by an electrostatic self-assembly method and was introduced to modify PS. Its effect on the flammability of PS composites was also investigated. The flammability of the PS composites was characterized using the limiting oxygen index (LOI) and vertical combustion. The effect of MAP on the morphology of the carbon layer formed from polymer decomposition was studied using scanning electron microscopy (SEM). By adding MAP to a PS/20%N-IFR flame-retardant composite, the flame-retardant property was significantly improved, the limiting oxygen index reached 37, and the vertical combustion reached a V-0 level. The fire performance index (FPI) of the PS/20%N-IFR composite reached 0.0054, which was significantly higher than that of the control PS (0.037) as determined by the cone calorimetry test. The SEM results showed that the introduction of MAP can increase the density of the carbon layer after combustion. The heat release rate for combustion was reduced. In addition, the mechanical properties of the PS/20%N-IFR composites were compared with those with no flame retardant. The tensile strength of the PS/20%N-IFR composite was 26.1 MPa and the elongation of the PS/20%N-IFR composite remained at 2.2%. The PS/20%N-IFR composite displayed better flame retardancy than the untreated material and good mechanical properties. The presence of MAP prevented the heat and oxygen transfer and interrupted the releasing of flammable products, thus protecting the PS from burning. This flame-retardant material may find broad applications in building insulation materials.

Flammability and Safety Design of Thermal Insulation Materials Comprising PS Foams and Fire Barrier Materials

Experimental Study on Temperature Field of Upward Flame Spread over Discrete Polystyrene Foam

Experimental Study on the Width and Pressure Effect on the Horizontal Flame Spread of Insulation Material

Experimental Investigation of Downward Discrete Flame Spread of the Thermoplastic Material in Exterior Insulation Walls: Melt-Flowing and -Dripping

Thermal Analysis and Flame Spread Behavior of Building-Used Thermal Insulation Materials

Experimental Study on Upward Flame Spread of Exterior Wall Thermal Insulation Materials

Thermal and fire risk analysis of typical insulation material in a high elevation area: Influence of sidewalls, dimension and pressure

Width Effect to the Flame Spread Characteristics of the Insulation Material PS in Plateau and Plain Environments

Correlation Study Between Flammability and the Width of Organic Thermal Insulation Materials for Building Exterior Walls

Research on Thermal and Central Flame Spread Behaviors over Insulation Material EPS in Different Concave Structure Cases

Experimental Study Of Thermal Behavior Of Insulation Material Rigid Polyurethane In Parallel, Symmetric, And Adjacent Building Facade Constructions

Development of Fire Field Model Incorporating Pyrolysis for Burning of Flame-Retardant Polystyrene in Enclosures

Heat Transfer Mechanism of Concurrent Flame Spread over Rigid Polyurethane Foam: Effect of Ambient Pressure and Inclined Angle

Melt-flowing of expanded polystyrene in large-scale discrete flame spread

Flame Spread over the Surface of Thermal Insulation Materials in Different Environments

Preparation of a New Type of Expansion Flame Retardant and Application in Polystyrene

Thermal and Fire Risk Analysis of Low Pressure on Building Energy Conservation Material Flexible Polyurethane with Various Inclined Facade Constructions

Melting and Dripping Flow Behaviors on the Downward Flame Spread of a Wide XPS Foam

Full-scale Experimental Study on Vertical Fire Spread Characteristics of Different Organic Insulation Systems

Experimental Study on Downward Flame Spread of Rigid Polyurethane Foam with External Radiation

Thermodynamic and Kinetic Characteristics of Combustion of Discrete Polymethyl Methacrylate Plates with Different Spacings in Concave Building Facades