Abstract:Polystyrene (PS) is a widely used building insulation material with good mechanical strength and strong temperature adaptability. However, PS itself is highly flammable and displays poor flame retardancy. At present, building fires caused by organic external wall thermal insulation materials prepared from PS represent a new fire hazard. In this study, the addition of an intumescent flame retardant (IFR) to reduce the flammability of PS was achieved. Using melamine (MEL), acrylonitrile-styrene-acrylate (ASA), and phytic acid (PA) as raw materials, a new type of flame retardant (MAP) was prepared by an electrostatic self-assembly method and was introduced to modify PS. Its effect on the flammability of PS composites was also investigated. The flammability of the PS composites was characterized using the limiting oxygen index (LOI) and vertical combustion. The effect of MAP on the morphology of the carbon layer formed from polymer decomposition was studied using scanning electron microscopy (SEM). By adding MAP to a PS/20%N-IFR flame-retardant composite, the flame-retardant property was significantly improved, the limiting oxygen index reached 37, and the vertical combustion reached a V-0 level. The fire performance index (FPI) of the PS/20%N-IFR composite reached 0.0054, which was significantly higher than that of the control PS (0.037) as determined by the cone calorimetry test. The SEM results showed that the introduction of MAP can increase the density of the carbon layer after combustion. The heat release rate for combustion was reduced. In addition, the mechanical properties of the PS/20%N-IFR composites were compared with those with no flame retardant. The tensile strength of the PS/20%N-IFR composite was 26.1 MPa and the elongation of the PS/20%N-IFR composite remained at 2.2%. The PS/20%N-IFR composite displayed better flame retardancy than the untreated material and good mechanical properties. The presence of MAP prevented the heat and oxygen transfer and interrupted the releasing of flammable products, thus protecting the PS from burning. This flame-retardant material may find broad applications in building insulation materials.

Ternary intumescent flame retardant composition containing ionic liquid towards efficiently flame‐retardant polystyrene

Flame Retardation and Thermal Degradation of Intumescent Flame‐retarded Polypropylene Composites Containing Spirophosphoryldicyandiamide and Ammonium Polyphosphate

A Novel Halogen‐free Intumescent Flame Retardant Containing Phosphorus and Nitrogen and Its Application in Polypropylene Systems

A phosphorus-, nitrogen- and carbon-containing polyelectrolyte complex: preparation, characterization and its flame retardant performance on polypropylene

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Preparation of a New Type of Expansion Flame Retardant and Application in Polystyrene

A novel halogen-free flame-retardant fabrication for the study of smoke suppression and flame retardancy of polystyrene

Synthesis of a novel triazine-based intumescent flame retardant and its effects on the fire performance of expanded polystyrene foams

Fire reaction properties of polystyrene-based composites using hollow silica as synergistic agent

Preparation of Microencapsulated Nitrogen‑phosphorus‑silicon Flame Retardant and Its Effect on High Impact Polystyrene Flame Retardancy

Cage‐shaped octaphenyl silsesquioxane with micro‐nano dispersibility for strengthening intumescent flame retardancy in polypropylene composites

Synthesis of a novel ionic liquid containing phosphorus and its application in intumescent flame retardant polypropylene system

Preparation of a novel Fe‐MOF as the flame retardant synergist and its application in polystyrene

Synergistic Flame Retardancy of Linear Low-Density Polyethylene with Surface Modified Intumescent Flame Retardant and Zinc Borate

Preparation of flame retardant and thermal insulation polystyrene foams via high internal phase emulsion template

Flame-retarded polystyrene with phosphorus- and nitrogen-containing oligomer: Preparation and thermal properties

Understanding the Flame Retardant Mechanism of Intumescent Flame Retardant on Improving the Fire Safety of Rigid Polyurethane Foam

Two-Dimensional Metal Phenylphosphonates As Novel Flame Retardants for Polystyrene

Synergistic effect of expandable graphite and intumescent flame retardants on the flame retardancy and thermal stability of polypropylene

A new strategy for constructing polypropylene composite foams with excellent ablation resistance and flame retardancy

Investigation of a Combination of Novel Polyphosphoramide and Boron-Containing Compounds on the Thermal and Flame-Retardant Properties of Polystyrene