Abstract:Using four different soft segments, i. e. polyterahydrofuran diol (PTMG), polycaprolactone diol (PCL), hydroxyl-terminated polybutadiene with high cis-1, 4 content (HTPB), and commercial hydroxyl-terminated polybutadiene produced by free radical polymerization (FHTPB), four kinds of polyurethane elastomers (PUE) were prepared by a two-step solution polymerization. The effects of soft segment structure on mechanical properties and thermal properties at room temperature and low temperature were investigated by tensile test, dynamic mechanical property analysis (DMA), differential scanning calorimetry (DSC) and thermogravimetric analysis. It has been found that the tensile strength and elongation at break of the four PUEs at low temperature (-30℃) are superior to those at room temperature. This is not only related to the autofrettage effect induced by crystallization of soft segment at low temperature, but also to the increase of the degree of micro-phase separation between the soft and hard segments. Compared with the other three kinds of PUE, the soft segment in HTPB-PUE has lowest polarity and glass transition temperature (Tg), so the micro-phase separation is in highest degree, and the elastomer has the most excellent flexibility. Even at -30℃, elongation at break of the HTPB-PUE is up to 660%. PCL-PUE and PTMG-PUE are rigid because their soft segments are easy to crystallize and their degree of micro-phase separation between soft and hard segment is low. The cyclic tensile testing indicated that HTPB-PUE and FHTPB-PUE still have excellent elasticity at-30℃. The results from DSC and DMA showed that the Tg of HTPB-PUE is much lower than the other three PUEs, and the value from DSC is about -103℃. The initial thermal decomposition temperatures of the four PUEs are very similar, and are all around 270℃.

Nonisocyanate Thermoplastic Polyhydroxyurethane Elastomers via Cyclic Carbonate Aminolysis: Critical Role of Hydroxyl Groups in Controlling Nanophase Separation

The Structure and Dynamic Properties of Thermoplastic Polyurethane Elastomer/Hindered Phenol Hybrids

Effect of soft segment structure on properties of polyurethane elastomers

Polyhydroxyurethanes (PHUs) Derived from Diphenolic Acid and Carbon Dioxide and Their Application in Solvent- and Water-Borne PHU Coatings

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Thermoplastic segmented polyhydroxyurethane: Biobased segments can lead to broad-temperature-range damping character in the absence of inter-segment hydrogen bonding

One-Shot Synthesis of Thermoplastic Polyurethane Based on Bio-Polyol (Polytrimethylene Ether Glycol) and Characterization of Micro-Phase Separation

Soft segment composition and its influence on phase-separated morphology of PCL/PEG-based poly(urethane urea)s

Preparation of Polyurethane‐Urea Elastomers Using Low Molecular Weight Aliphatic Diamines Enabled by Reversible CO2 Chemistry

Mechanically Robust and Chemically Recyclable Polyhydroxyurethanes from CO 2 -Derived Six-Membered Cyclic Carbonates

Synthesis and Characterization of Crystallizable Aliphatic Thermoplastic Poly(ester Urethane) Elastomers Through a Non-Isocyanate Route

Studies on the Synthesis and Properties of Aliphatic Thermoplastic Polyurethanes via Non-isocyanate Route

Mechanical properties of thermoplastic polyurethanes containing aliphatic polycarbonate soft segments with different chemical structures

Phase separation studies in RIM polyurethanes catalyst and hard segment crystallinity effects

Unified method to prepare thermoplastic/thermoset soft polyurethanes reshape-able around room temperature on-demand

Reprocessable polyhydroxyurethane networks crosslinked with trifunctional polyhedral oligomeric silsesquioxanes via Diels-Alder reaction

Synthesis and properties of high performance thermoplastic polycarbonate polyurethane elastomers through a non-isocyanate route

A Non-Isocyanate Route to Poly(Ether Urethane): Synthesis and Effect of Chemical Structures of Hard Segment

Unraveling the impact of phase separation induced by thermal annealing on shape memory effect of polyester‐based thermoplastic polyurethane

Effect of Chain Extender on Hydrogen Bond and Microphase Structure of Biodegradable Thermoplastic Polyurethanes

Block length distribution, morphology, and property of thermoplastic polyurethanes affected by production method: A polymer‐by‐process investigation