Design method of off-axis reflective freeform zoom optical systems

Gaoxing Zhao,Jun Zhu

DOI: https://doi.org/10.1364/oe.530798

IF: 3.8

2024-07-26

Optics Express

Abstract:Gaoxing Zhao, Jun Zhu This paper presents a design method for off-axis reflective zoom optical systems. The method can be used to design off-axis zoom optical ... [Opt. Express 32, 28806-28820 (2024)]

optics

What problem does this paper attempt to address?

Design of off-axis reflective dual-channel zoom freeform optical systems

Gaoxing Zhao,Jun Zhu

DOI: https://doi.org/10.1016/j.optcom.2024.131079

IF: 2.4

2024-09-14

Optics Communications

Abstract:In this work, two off-axis reflective dual-channel zoom optical systems are conceived and designed. These two systems achieve good imaging quality and compact system volume by introducing freeform surfaces. Firstly, the system models of the off-axis reflective dual-channel zoom optical systems are introduced, and the first-order analysis is carried out. Then, a design method of an off-axis reflective dual-channel zoom freeform optical system is introduced, and two examples are designed using this method. In one example, the two channels have a separate primary mirror and share a secondary mirror and a third mirror. The system achieves a zoom ratio of 2 times. The two different channels of the other system have separate third mirror and share the primary mirror and the secondary mirror. The system achieves a zoom ratio of 4 times. The two systems have good imaging performance close to the diffraction limit in the visible light band. Finally, the proposed off-axis reflective dual-channel zoom freeform optical system is analyzed and discussed.

optics
Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Zhenrong Zheng

DOI: https://doi.org/10.1016/j.ijleo.2010.02.011

IF: 3.1

2011-01-01

Optik

Abstract:In this paper, an off-axis reflective projection lens with single Fresnel reflective surface and three aspheric surfaces were designed. The design method of reflective lens using spherical Fresnel surface is discussed. The MTF (Modulation Transfer Function) of the off-axis reflective lens, with optical magnification 100×, F-number 2.5 and field of view 120°, is over 40% at 0.6lp/mm on the image side, the distortion is less than 2%. This design method can provide reference for application of Fresnel surface in wide field of view imaging, and possesses a bright future with the continuous development of fabrication technique.
Off-axis Zoom Optical Systems Based on Mirror Rotation and Their Design Method

Gaoxing Zhao,Jun Zhu

DOI: https://doi.org/10.1016/j.optlastec.2024.111031

2024-01-01

Abstract:This paper proposes a type of off-axis zoom optical system, achieving zoom through the rotation of one mirror. These systems have two different operating states, where one state has a shorter focal length and a larger field of view, and the other with the opposite. Switching between the two states is accomplished by simply rotating one mirror by a small angle. In contrast to the traditional method of simultaneously controlling the axial translation and rotation of the mirrors to achieve zoom, these systems only require a small rotation of the third mirror to achieve zoom, which is advantageous for reducing the system's control difficulty. In addition, a method for the design of this type of system is presented and used to design an off-axis zoom imaging optical system incorporating three freeform mirrors. The system has an entrance pupil diameter of 20 mm, a focal length of 200 mm in the long focal state, a focal length of 100 mm in the short focal state, and a zoom ratio of 2 times. The system requires only a 2.93 degrees rotation of the third mirror to switch between the two states. The final system illustrates excellent imaging performance close to the diffraction limit in the visible light wavelength range.
Design of reflective lens with Zernike polynomial free form surfaces

ZHENG Zhen-rong,SUN Xu-tao,MIAO Ying-ying,GU Pei-fu,LIU Xu

DOI: https://doi.org/10.3785/j.issn.1008-973X.2008.12.031

2008-01-01

Abstract:In order to study the problem that free form surfaces are hard to be applied in the design of image system,an off-axis reflective lens composed with Zernike polynomials free form mirrors was designed by the wave-front analysis for Zernike polynomials free form surfaces.Based on the analysis of aspheric off-axis lens,Zernike polynomials was used to describe the free form shape mirror,and the aberration which was analyzed to match with Seidel aberration was used to design the free form reflective lens.A reflective projection lens was constructed with three Zernike polynomials free form shape mirrors,with layout of "concave-convex-convex",and the lens was telecentric in object space.Furthermore,the lens's performance was analyzed,under the condition of relative aperture of 2.5 and angle of view of 130°, the module transfer function(MTF) was over 60% at 100 lp/mm on magnification side,and the distortion was less than 2%.Design result showed that using Zernike polynomials free form surface can dramatically decrease the aberration of off-axis lens,simplify the configuration and increase the definition of image system.
Freeform Optical Design of Beam Shaping Systems with Variable Illumination Properties.

Lin Yang,Fanqi Shen,Zhanghao Ding,Xiao Tao,Zhenrong Zheng,Fei Wu,Yong Li,Rengmao Wu

DOI: https://doi.org/10.1364/oe.436340

IF: 3.8

2021-01-01

Optics Express

Abstract:Freeform optics constitutes a new technology that is currently driving substantial changes in beam shaping. Most of the current beam shaping systems are elaborately tailored for fixed optical properties, which means the output light distribution of a beam shaping system usually cannot be changed. What we present here is a class of beam shaping systems, the optical properties of which can be changed to meet the requirements for different applications. The proposed beam shaping system is composed of a freeform lens and a non-classical zoom system which is designed by ray aiming and the conservation of energy instead of aberration control. The freeform lens includes two elaborately designed freeform optical surfaces, by which both the intensity distribution and wave-front of an incident light beam are manipulated in a desired manner. The light beam after propagating through the non-classical zoom system produces an illumination pattern on a fixed observation plane with a variable pattern size and an unchanged irradiance distribution at different zoom positions. Two design examples are presented to demonstrate the effectiveness of the proposed beam shaping systems.
Design of Freeform Illumination Optics

Rengmao Wu,Zexin Feng,Zhenrong Zheng,Rongguang Liang,Pablo Benítez,Juan C. Miñano,Fabian Duerr

DOI: https://doi.org/10.1002/lpor.201700310

2018-01-01

LASER & PHOTONICS REVIEWS

Abstract:Freeform optics constitutes a new technology that is currently driving substantial changes in illumination design. It liberates designers and engineers from restrictions of optical surface geometry, enabling them to achieve compact, lightweight, and efficient illumination systems with excellent optical performance. Freeform optics is currently used widely for both fundamental research and practical applications. This Review focuses on the design of freeform illumination optics, which is a key factor in advancing the development of illumination engineering. The design methods of freeform illumination optics can be divided into two groups: zero-etendue algorithms based on ideal source assumption and design algorithms for extended light sources. The zero-etendue algorithms include ray mapping method, Monge-Ampere equation method, and supporting quadric method. The algorithms for extended sources include illumination optimization, feedback design, and simultaneous multiple surfaces method. The characteristics and limitations of these design methods are illustrated and a summary of these methods with future outlooks is also given.
Design Of Freeform Lenses For Illuminating Hard-To-Reach Areas Through A Light-Guiding System

Lin Yang,Yingli Liu,Zhanghao Ding,Jinlei Zhang,Xiao Tao,ZhenRong Zheng,Rengmao Wu

DOI: https://doi.org/10.1364/OE.411394

IF: 3.8

2020-01-01

Optics Express

Abstract:Designing freeform optics for illuminating hard-to-reach areas is a challenging and rewarding issue. The current designs of freeform illumination optics are mostly valid in the applications in which the region of interest is easily accessible. What we present here is a general formulation of designing freeform lenses for illuminating hard-to-reach areas. In this method, the freeform lens consists of two elaborately designed surfaces, by which both the intensity distribution and wave-front of the light beam are manipulated in a desired manner. The light beam after refraction by the freeform lens is further guided through a light-guiding system to produce a prescribed illumination on a target plane which is inaccessible. The properties of the light-guiding system are taken into account in the tailoring of the freeform lens profiles to guarantee the prescribed illumination on the target plane. Two examples are presented to demonstrate the elegance of this method in designing freeform optics for illuminating hard-to-reach areas. (C) 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Design Method of Freeform Off-Axis Multi-Mirror Optical Systems

Xinyu Liu,Jun Zhu

DOI: https://doi.org/10.3390/photonics9080534

IF: 2.536

2022-01-01

Photonics

Abstract:A data point calculation method that does not require the use of Fermat's principle and a simple and general design method of starting points of freeform off-axis multi-mirror optical systems are proposed in this paper, which aim to promote the realization of high-performance reflective systems containing freeform surfaces. Taking a planar system and the required parameters as the input, a good starting point for a freeform off-axis multi-mirror system can be automatically obtained using the proposed method. The design of a freeform off-axis five-mirror system with a low F-number is taken as an example to show the effectiveness of the proposed method. The method can also be used for the design of freeform reflective systems with other numbers of mirrors.
Design method of freeform off-axis three-mirror reflective imaging systems

Huaixue Zhao,Limin Gao,Xianglong Mao,Yaxuan Duan,Xun Xue

DOI: https://doi.org/10.1364/AO.498270

2023-10-10

Abstract:In this paper, a novel, to the best of our knowledge, method is proposed to design a freeform off-axis three-mirror reflective imaging system. A special algorithm is demonstrated to calculate the data points on the unknown freeform surface using the rays from the pupil of the center field. Then the three-dimensional shape of the freeform surface is solved by these characteristic points, which serves as a good starting point for further optimization. The benefit of this design method is demonstrated by designing a freeform off-axis three mirror imaging system with high performance. The final system operates at F/2 with an entrance pupil diameter of 400 mm and a field of view of 2.4∘×2.4∘. The modulation transfer function (MTF) value of the system reaches 0.6 at 100 lp/mm or higher at all fields of view.
Design of A Freeform, Dual Fields-Of-View, Dual Focal Lengths, Off-Axis Three-Mirror Imaging System with A Point-By-Point Construction-Iteration Process

Tong Yang,Jun Zhu,Guofan Jin

DOI: https://doi.org/10.3788/col201614.100801

IF: 2.56

2016-01-01

Chinese Optics Letters

Abstract:In this Letter,we propose a novel configuration and design method of freeform,dual fields-of-view(FOVs),dual focal lengths,off-axis three-mirror zoom imaging systems.The switch of the two zooms is achieved by rotating a single mirror element.The design of a freeform,dual focal lengths zoom system is realized by a point-by-point design approach for the first time to our knowledge.This method enables the direct design of freeform surfaces from initial planes using given system specifications and configuration,and the designed system can be taken as a good starting point for further optimization.A freeform,dual FOVs,dual focal lengths,off-axis three-mirror zoom system is demonstrated.The F-numbers of the two zooms are 2 and 2.4.The dual FOVs are 3°×3°and2.5°×2.5°.After final optimization,both of the zooms achieve high performances.
Towards Automatic Freeform Optics Design: Coarse and Fine Search of the Three-Mirror Solution Space

Benqi Zhang,Guofan Jin,Jun Zhu

DOI: https://doi.org/10.1038/s41377-021-00510-z

2021-01-01

Light Science & Applications

Abstract:Design of an optical system, whether classic or novel, in the past or the present, requires significant effort from the designer. In addition to design methods and theories, the designer's skills and experience in optical system design are particularly important, which may require years of practice to learn. The diversity and variety of results are limited because of the difficulty, time, and labor costs required. In this article, we propose an automatic design method for freeform optics that can achieve a diverse range of three-mirror designs. The optical specifications and the design constraints are the only inputs required, and a variety of results can be obtained automatically. The output results have various structures and various optical power distributions with high imaging qualities. By implementing the design method, designers can not only realize an overview of the solution space of the three-mirror freeform system, but can also focus on specific designs.
Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Wei Hou,Jun Zhu,Tong Yang,Guofan Jin

DOI: https://doi.org/10.1088/2040-8978/17/5/055603

IF: 2.1

2015-01-01

Journal of Optics

Abstract:In this paper, a construction method through forward and reverse ray tracing for a design of ultra-wide linear field-of-view (FOV) off-axis freeform systems is proposed. The freeform initial system is numerically constructed by a point-by-point calculation. This method begins with a spherical system solved by the paraxial optical theory. In this method, the primary mirror is calculated through the reverse ray tracing; hence, the size and position of the aperture stop is not affected by the changes of mirrors. The fields in the reverse system are selected to cause certain beam overlaps on the primary mirror between adjacent fields. These overlaps offer a more uniform distribution of data points, improving the calculation of this mirror. As an example, an off-axis freeform system with an ultra-wide linear field-of-view of 70 degrees is designed by this method. The effective focal length of the system is 75 mm, and the F-number is 5.8. The diffraction-limited performance of this freeform system in the visible band and the near infrared and near ultraviolet bands validate the construction method presented in this paper.
Freeform lens for off-axis illumination in optical lithography system

Rengmao Wu,Zhenrong Zheng,Haifeng Li,Xu Liu

DOI: https://doi.org/10.1016/j.optcom.2011.02.028

IF: 2.4

2011-01-01

Optics Communications

Abstract:A method of designing a freeform lens for off-axis illumination (OAI) in an optical lithography system is proposed in this paper. Based on the Snell's law and conservation law of energy, a series of first-order partial differential equations are deduced. Coordinate relations are established with the energy mapping relations by the characteristics of the incident beam and the predetermined irradiance distribution on the target plane. The contours of the freeform lens are calculated by solving partial differential equations numerically. Moreover, the optical performance for OAI is simulated and analyzed. Simulation results show that the irradiance distributions can be well controlled with a maximum uniformity of 95.71% and a maximum efficiency of 99.04%. Tolerance analysis shows that the angular errors of the freeform lens are more sensitive than the coordinate errors.
Design method of zoom systems based on high-order structural aberration coefficients

Zhang Jipeng,Shi Guangwei,Ye Haokun,Huang Yuqi,Shangnan Zhao,Zhang Xin

DOI: https://doi.org/10.1364/oe.539144

IF: 3.8

2024-09-27

Optics Express

Abstract:Zhang Jipeng, Shi Guangwei, Ye Haokun, Huang Yuqi, Shangnan Zhao, Zhang Xin Optical zoom systems have found widespread applications in fields such as security and mobile phone lenses. The theory of zoom lens design ... [Opt. Express 32, 36729-36741 (2024)]

optics
Application of Freeform Surfaces in Designing Off-axis Reflective Space Optical Imaging Systems

Jun ZHU,Xiaofei WU,Wei HOU,Tong YANG,Guofan JIN

DOI: https://doi.org/10.3969/j.issn.1009-8518.2016.03.001

2016-01-01

Abstract:In the field of space optics which is closely related to aeronautics and astronautics, off-axis reflective imaging systems are attracting more and more researchers’ attention due to their various advantages. Compared with traditional spheres and aspheres, freeform surfaces have higher degrees of design freedom, and are capable of correct a variety of asymmetric aberrations. Therefore, freeform surfaces have full capability of designing the off-axis reflective imaging systems, and furthermore they have the potential to meet some high-end or special requirements in space optics. Improving optical performance and realizing special structure are two main application directions of freeform surfaces in space optics. In this paper, following the two directions and aiming at some real requirements of space optical imaging systems, including low F-number, wide field-of-view, compact structure, having a real exit pupil and afocal system, the authors have selected several representative freeform off-axis reflective imaging systems, and emphatically introduced their system configurations, optical performance, and application advantages in space optics.
Optimization Design Of Zoom Lens Systems

Xt Li,Zf Cen

DOI: https://doi.org/10.1117/12.471198

2002-01-01

Abstract:A zoom lens system is usually composed of several components. Some of the components can be moved to change the focal length or magnification. Zoom lens system design is more complicated than fixed-focus lens design due to the moving of some components. In this paper, an optimization method that is used to design zoom lens systems is presented. Using this method, the Gaussian parameters of zoom lens systems are optimized at first, and then the initial structure parameters in each component are generated and optimized. At last the aberration balance is made using multi-configuration. In this paper the flowchart of optimization design for such complex optical systems is showed and the algorithms are described. As a conclusion, the relationship between power distribution, initial structure and the aberrations is considered at the beginning, the evaluation criteria are reliable and efficiency for designing zoom lens systems.
Design Method of Freeform Off-Axis Reflective Imaging Systems with a Direct Construction Process.

Tong Yang,Jun Zhu,Wei Hou,Guofan Jin

DOI: https://doi.org/10.1364/oe.22.009193

IF: 3.8

2014-01-01

Optics Express

Abstract:In this paper, a novel method is proposed to design the freeform off-axis reflective imaging systems. A special algorithm is demonstrated to calculate the data points on the unknown freeform surface using the rays from multiple fields and different pupil coordinates. These points are used to construct the multiple three-dimensional freeform surfaces in an imaging system which works for a certain object size and a certain width of light beam. An unobscured design with freeform surfaces can be obtained directly with this method, and it can be taken as a good starting point for further optimization. The benefit of this design method is demonstrated by designing a freeform off-axis three-mirror imaging system with high performance and system specifications. The final system operates at F/1.49 with a 64mm entrance pupil diameter and an 8° × 9° field-of-view (FOV). The performance of the system is diffraction limited at LWIR (long-wavelength-infrared).
The design method of off-axis reflective stabilized zoom system based on deformable mirrors

Yuxuan Tian,Xuemin Cheng,Qun Hao

DOI: https://doi.org/10.1117/12.3003585

2023-01-01

Abstract:Optical zoom system plays an important role application in high precision opto-electronic imaging for the high-speed moving target imaging. The novel stabilized zoom stabilization system based on deformable mirrors(DMs) has a future application prospect in integrating fast doubling, accurate focusing, image plane stabilization and aberration compensation. In this paper, we design a reflective zoom structure including the front group and the rear group. The double DMs and the reflective mirrors form the Combined Telephoto and Reversed-Telephoto structure, which achieve the zoom of the system and correct the off-axis aberration during the whole focal length. The fixed reflective mirror in rear group is used to compress the optical length and keep the image stabilized. We make full use of effective diameter range of DMs and the flexible deformations amount of actuator strokes to achieve the freeform surfaces in the system. It achieves a high zoom ratio of 14.52 and 5 milliseconds of zooming time from Wide-angle and Telephoto. This optical system is conducive to further achieving high zoom efficiency and high speed in the stabilized zoom system based on DMs.
Design and discussion of off-axis reflective double-pass optical systems

Gaoxing Zhao,Jun Zhu

DOI: https://doi.org/10.1364/ao.514450

IF: 1.9

2024-02-10

Applied Optics

Abstract:Gaoxing Zhao, Jun Zhu In most off-axis reflective optical systems, light beams only pass each optical element once. A double-pass structure can increase the ... [Appl. Opt. 63, 1418-1428 (2024)]

optics
Design method for zoom systems based on magnification ratio modulation of afocal off-axis three-mirror anastigmat systems

Yunsheng Qi,Qingyu Meng

DOI: https://doi.org/10.1364/oe.536557

IF: 3.8

2024-09-14

Optics Express

Abstract:Yunsheng Qi, Qingyu Meng Achieving higher resolution and larger zoom ratio is one of the primary goals of zoom optical systems. To this end, we propose a new zoom ... [Opt. Express 32, 34988-35001 (2024)]

optics

Design method of off-axis reflective freeform zoom optical systems

Design of off-axis reflective dual-channel zoom freeform optical systems

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Off-axis Zoom Optical Systems Based on Mirror Rotation and Their Design Method

Design of reflective lens with Zernike polynomial free form surfaces

Freeform Optical Design of Beam Shaping Systems with Variable Illumination Properties.

Design of Freeform Illumination Optics

Design Of Freeform Lenses For Illuminating Hard-To-Reach Areas Through A Light-Guiding System

Design Method of Freeform Off-Axis Multi-Mirror Optical Systems

Design method of freeform off-axis three-mirror reflective imaging systems

Design of A Freeform, Dual Fields-Of-View, Dual Focal Lengths, Off-Axis Three-Mirror Imaging System with A Point-By-Point Construction-Iteration Process

Towards Automatic Freeform Optics Design: Coarse and Fine Search of the Three-Mirror Solution Space

Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Freeform lens for off-axis illumination in optical lithography system

Design method of zoom systems based on high-order structural aberration coefficients

Application of Freeform Surfaces in Designing Off-axis Reflective Space Optical Imaging Systems

Optimization Design Of Zoom Lens Systems

Design Method of Freeform Off-Axis Reflective Imaging Systems with a Direct Construction Process.

The design method of off-axis reflective stabilized zoom system based on deformable mirrors

Design and discussion of off-axis reflective double-pass optical systems

Design method for zoom systems based on magnification ratio modulation of afocal off-axis three-mirror anastigmat systems