Abstract:Cold spray allows for fabricating metal matrix composites or repairing damaged components in a scalable way with a high deposition rate. Nevertheless, the poorly bonded interfaces (both metallic splats/splats and metallic splats/reinforcements) and pores in the composite deposit result in undesirable mechanical performance, which limits its applications for load-bearing components. In this study, a special designed composite powder reinforced with in-situ TiB2 particles was used as the feedstock to produce TiB2/AlSi10Mg composite components by cold spray additive manufacturing. Following this, the effect of post-annealing treatment on interfaces and micro-pores healing, microstructure evolution, and mechanical properties of the cold sprayed TiB2/AlSi10Mg composites was investigated in terms of X-ray diffraction, electron backscatter diffraction, transmission electron microscopy, and tensile test. The cold sprayed composite exhibited a bimodal structure with ultrafine grains formed at the inter-splat boundaries due to dynamic recrystallization induced by intensive plastic deformation of the particles. In addition to the uniformly dispersed TiB2 nanoparticles, some aggregated clusters remained embedded in the Al matrix. Tensile tests revealed that the as-sprayed deposits possessed very high tensile strength but almost no toughness due to the poorly bonded inter-splats and enhanced work hardening effect. Significant improvement in ductility was achieved in the annealed samples through improvement of metallurgical bonding between the deformed splats, release of residual stress, and static recrystallization. Interestingly, when the annealing temperature was increased up to 500 °C, both the pure AlSi10Mg and TiB2/AlSi10Mg composite samples fractured at a very early stage due to the presence of large pores (>20 µm) which may originate from the moisture of initial powders. The in-situ formed TiB2 nanoparticles play an important role in strengthening the Al matrix, meanwhile, maintaining a good ductility due to the robust interface bonding. This study demonstrates the potential of using a gas-atomized composite powder to produce high-performance metal matrix composites by cold spray additive manufacturing followed by annealing treatment.

Scalable manufacturing of the Al-based master composites containing TiB 2 and TiC particles and their modification effect on the hot cracking of rapidly solidified Al alloys

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Selective laser melting additive manufacturing of 7xxx series Al-Zn-Mg-Cu alloy: Cracking elimination by co-incorporation of Si and TiB2

Nanoparticles Enabled Mechanism for Hot Cracking Elimination in Aluminum Alloys

Additive manufacturing of micro/nano multiphase synergistically reinforced Ti-55Al-7.5Nb with a reticular boundary precipitate via direct laser deposition

Microstructure, solidification behavior and mechanical properties of Al-Si-Mg-Ti/TiC fabricated by selective laser melting

An additively manufactured γ-based high Nb-TiAl composite via coherent interface regulation

Selective laser melting of TiB2/AlSi10Mg composite: Processability, microstructure and fracture behavior

The mechanism and regulation of hot cracking in a new complex-concentrated alloy by a novel integrated directed energy deposition

Facile and cost-effective approach to additively manufacture crack-free 7075 aluminum alloy by laser powder bed fusion

Effect of high cooling rate on the solidification microstructure of Al-Cu/TiB 2 alloy fabricated by Freeze-Ablation casting

Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts

Achieving high combination of strength and ductility of Al matrix composite via in-situ formed Ti-Al3Ti core-shell particle

Acquiring Mg-Ag microalloying TiB 2 /Al-4.5Cu composite simultaneously with ultrahigh strength and ductility via optimized salt-metal reaction and multistage heat treatment

High-throughput analysis of Al and Nb effects on mechanical behaviour of TiAl alloys using electromagnetic cold crucible continuous casting

In-situ synthesized a dual-scale Ti 2 AlC reinforced TiAl composites with superior mechanical properties

Effects of Reinforcement Content and Homogenization Treatment on the Microstructure and Mechanical Properties of in-situ TiB2/2219Al Composites

Mitigating hot-cracking of laser melted CoCrFeNiMnTix high-entropy alloys

Effect of annealing treatment on microstructure and mechanical properties of cold sprayed TiB2/AlSi10Mg composites

Hierarchically heterogeneous strategy for Ti 2 AlC/TiAl composite with superior mechanical properties

Enhancing strength-ductility synergy in nano-sized TiB 2 /Al composite via rapid solidification and thermo-mechanical processing