Abstract:A reconfigurable IPT system with high misalignment tolerance and CC‐CV output characteristics is proposed in this article. The experimental results demonstrate that the proposed reconfigurable IPT system can maintain stable CC and CV outputs within 50% lateral and vertical offset (the coupling factor varies from 0.1 to 0.21), when the load varies from 11 to 80 Ω, and the output current and voltage fluctuations remain below 5%. Misalignment between transmission coils is an inevitable challenge in inductive power transfer (IPT) systems, particularly affecting the constant current (CC) and constant voltage (CV) outputs essential for battery charging. A reconfigurable IPT system with high misalignment tolerance and CC‐CV output characteristics is proposed in this article. The main circuit of the system is composed of a LCC‐LCC and LCC‐S topology with two intermediate coils, and two switches equipped with single unidirectionally blocking MOSFETs are incorporated on the secondary side to transition from CC to CV mode. A comprehensive analysis of the output characteristics for the proposed hybrid topology in both CC and CV modes is provided. Furthermore, the parameter optimization design based on BP coil for wide misalignment tolerance is presented. The experimental results demonstrate that the proposed reconfigurable IPT system can maintain stable CC and CV outputs within 50% lateral and vertical offset (the coupling factor varies from 0.1 to 0.21), when the load varies from 11 to 80 Ω, and the output current and voltage fluctuations remain below 5%.

An Impedance Matching Network Tuning Method for Constant Current Output Under Mutual Inductance and Load Variation of IPT System

Tuning Method Based T-model for LCC/S Compensated IPT System with Constant Current Output Characteristics

A Hybrid IPT System Implementing Misalignment Tolerance and Constant Current Output with Primary Intermediate Coil

Design of an Inductive Power Transfer System with Constant Current and Constant Voltage Outputs Based on Multi-frequency Circuit

An Inductive Power Transfer Charging System With a Multiband Frequency Tracking Control for Misalignment Tolerance

Analysis of a Three-Coil Series-Parallel-Series Topology Based on Asymmetrical Factor Method in Inductive Power Transfer System for Misalignment with Constant Current Output

Minimizing Current in Inductive Power Transfer Systems With an Asymmetrical Factor for Misalignment Tolerance and Wide Load Range

An Integrated Inductive Power Transfer System Design with a Variable Inductor for Misalignment Tolerance and Battery Charging Applications

A Hybrid IPT System with High-Misalignment Tolerance and Inherent CC–CV Output Characteristics for EVs Charging Applications

A Gyrator-Based Converting-Splitting Method of Designing Inductive Power Transfer Systems with Constant Current and Constant Voltage Charging

A Parameter Design Method for High Performance LCLC-LC Compensated CPT Systems

Design of Constant-Voltage and Constant-Current Output Modes of Double-Sided LCC Inductive Power Transfer System for Variable Coupling Conditions

An Improved Design Method Based on a Multi-Plate Coupler Structure for Capacitive Power Transfer with Wide Ranges of Misalignment and Loads

A Novel L-S/N Compensation Topology for Inductive Power Transfer Systems with Constant Current Outputs and a Compact Receiver

Minimizing Primary Current Based on Asymmetric Parameter Design Method under Wide Load Range and Variable Coupling Condition in Inductive Power Transfer Systems

Compact Z-Impedance Compensation for Inductive Power Transfer and its Capacitance Tuning Method

A Hybrid Wireless Power Transfer System with Constant and Enhanced Current Output Against Load Variation and Coupling Misalignment

A Capacitive Power Transfer System Designed for Stable Outputs with Load Variations

Concentric-coil Hybrid IPT System with Improved Tolerance to Coupling and Load Variations

A Reconfigurable IPT System With CC‐CV Output Characteristics and High Misalignment Tolerance

An IPT System with Constant Current and Constant Voltage Output Features for EV Charging