Abstract:Cordierite ceramic is usually used for diesel particulate filter owing to its excellent low thermal expansion coefficient and high thermal shock resistance properties. However, the co-exited intermediate spinel phase can deteriorate the thermal and mechanical performances of cordierite ceramic product, because the spinel phase has much higher thermal expansion coefficient comparing to that of cordierite. In this study, two methods are utilized to reduce the spinel impurity in the cordierite ceramic. On the one hand, rational reaction resources were introduced to decrease spinel production. The formation of intermediate spinel phase is systematically researched by X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman characterizations and the results clarified the preference of path "Enstatite + Mullite & RARR; Cordierite" for less spinel production in comparison to path "Enstatite + Al2O3 & RARR; Cordierite + Spinel." Additionally, MgO was introduced as fluxing agent to promote liquid-phase sintering, thus facilitating the conversion of spinel. On the other hand, the sintering schedule was improved by introducing a holding temperature gradient to promote the diffusion of Si4+ and further promote the conversion of spinel into cordierite. With these methods, the residual spinel phase is minimized, the resulting high-purity cordierite has a 47% reduction in the thermal expansion coefficient from 3.07 x 10-6/K to 1.63 x 10-6/K compared to the original cordierite sample.

Low-Density Ceramic Microspheres Prepared from Kaolinite and Magnesite

The Effects of Mineral Composition and Sintering Temperature on Synthetic Mullite

Preparation of Light-Weight Ceramic Microsphere by Dolomite and Gangue

Preparation and Characterization of Porous Mgal2o4 Spinel Ceramic Supports from Bauxite and Magnesite

Effect Of Sintering Process On Micro-structure And Properties Of Mullite Porous Ceramics Containing magnesium oxide

Preparation and properties of porous ceramics from spodumene flotation tailings by low-temperature sintering

Preparation of Bauxite Ceramic Microsphere

Low-temperature Densification and Mechanical Properties of Monolithic Mullite Ceramic

Effect of Al2O3 on Sintering and Thermal Shock Resistance of MgO Ceramic

Fabrication and Properties of Porous Mullite Ceramics from Directly Sintering Ceramic Microspheres

Low-temperature Synthesis of Highly Porous Whisker-Structured Mullite Ceramic from Kaolin

A Simple and Efficient Way to Prepare Porous Mullite Matrix Ceramics Via Directly Sintering SiO2-Al2O3 Microspheres

Effect of the different additives on the fabrication of porous kaolin-based mullite ceramics

Physico-Mechanical and Microstructure Characteristics of Porous Mullite Ceramics

Effect of Reduced Al2O3 Mole Ratio on Fabrication of Cordierite Ceramic by Solid-State Sintering Method

Enhancing thermal insulation and mechanical strength of porous ceramic through size-graded MA Hollow Spheres

Effect of different MgO/Al2O3 ratios on microstructural densification, sintering process and mechanical property of MgAl2O4 materials

Fabrication of dense cordierite ceramic through reducing Al2O3 mole ratio

Formation, Conversion and Elimination of Intermediate Spinel Phase in MgO/kaolin Mixture Firing for Cordierite

Synthesis of magnesium aluminate spinel by reaction sintering with different magnesia sources

Al2O3 Ceramics with Well-Oriented and Hexagonally Ordered Pores: the Formation of Microstructures and the Control of Properties