Abstract:Cold radial forging (CRF) is recognized as one of the most effective manufacturing processes for the production of hollow components. Nonetheless, even minor alterations in the alloy composition during the cold deformation processing phase can significantly influence the material's manufacturability. This study addresses the challenges associated with high optimization costs, complex data acquisition, and the prediction of forming quality when integrating multiple processes, such as heat treatment and material composition. We propose the development of an intelligent predictive model aimed at forecasting the forming quality of the 20CrMnTiH alloy during CRF, utilizing a back-propagation neural network optimized by genetic algorithm (GA-BP). The assessment of forming quality is based on parameters such as damage, residual stress, and equivalent strain. The study investigates the impact of alloy composition and spheroidal annealing (SA) process parameters on forming quality. The performance of the three GA-BP prediction models is superior in terms of the coefficient of determination ( R 2 ) and mean square error (MSE), when compared to a conventional BP neural network and four other machine learning techniques, including gradient-boosted decision trees, random forests, support vector regression, and logistic regression. A comprehensive comparative analysis of the evaluation metrics across all three prediction models, alongside multi-objective optimization, indicates that the Pareto solution set generated by NSGA-II exhibits optimal distribution uniformity. The optimized process parameters (0.17%C-0.24%Si-0.81%Mn-0.03%P-0.03%S-1.15%Cr-0.05%Ni-0.06%Ti, T e : 60°C, AT i : 4.57 h) resulted in a reduction of residual stresses by 12%, equivalent strain by 15%, and component damage by 30%. The results demonstrate that the methodology proposed in this paper not only enhances the quality of CRF molding but also significantly improves the accuracy of the predictive model for forming quality.

An Upper Bound Solution of Forging Load in Cold Radial Forging Process of Rectangular Cross-Section Billet

Vertical Load Analysis of the Lifting Systems for Forging Manipulator During the Forging Process

Investigation of the Penetration Performance of the Radial Forging Process for Wrought Aluminium Alloy

ON FORGING FORMING FORCE IN THE COMPOSITE TECHNOLOGY OF CROSS WEDGE ROLLING ( CWR ) AND FORGING FOR UNIVERSAL JOINT FORK

An analysis for three-dimensional upset forging of elliptical disks and rings based on the upper-bound method

Cylindrical Billet Size Optimization for Hot Closed-Die Forging of the Upper Ball Joint

Study on Rational Width ratio of Anvil and Reduction in FM Forging Process

Investigation of FM heavy forging process by the Moiré method Part III: A direct forging process standard

Multi-objective optimization of concave radial forging process parameters based on response surface methodology and genetic algorithm

Numerical Model Simulation of the Double-Roll Rotary Forging of Large Diameter Thin-Walled Disk

Modeling for warping prediction and control in cold rotary forging of round plate

3D FE modeling simulation of the double-roll hot rotary forging of large diameter thin-walled metal disk

The microstructure, texture evolution and plasticity anisotropy of 30SiMn2MoVA high strength alloy steel tube processed by cold radial forging

System Analysis of Cold Axial Rotary Forging of Thin-Walled Tube Blanks

Multi-objective optimization of forging surface structure parameters of radial forging die with cycloidal

SIMULATION ANALYSIS OF WHEEL BEARING FORGING PROCESS BASED ON DEFORM

Effect of shearing on production stability and die life in automatic multi-stage cold forging of an automobile wheel nut

Research the Dimensional Accuracy of C45 Steel Ring Forgings Produced by Radial Rolling

Intelligent optimization of cold radial forging process for 20CrMnTiH alloy based on GA-BP and performance analysis

Positioning in large-scale die forging process for the long axial billet based on multi-body dynamics

Numerical Simulation Research on Final Forging Process of 700MW Class Heavy Hydro-generator Shaft