Abstract:Porous activated carbon with a ultrahigh specific surface area (3164 m2 g−1) and large pore volume (1.88 cm3 g−1) was prepared from waste litchi shells with channel-like macropores via a KOH activation method. The macroporous structure of litchi shells is believed to be conducive to distribute the activation agent, which enables sufficient activation. The as-prepared activated carbon was developed as a conducting framework for lithium–sulfur battery cathode materials. The resulting activated carbon/sulfur composite cathode possesses a high specific capacity, good rate capability, and long-term cycling performance. At 200 mA g−1 current density, the initial discharge capacity of the activated carbon/sulfur composite cathode with 60 wt% sulfur content is 1105 mA h g−1. At a current density of 800 mA g−1, the activated carbon/sulfur composite cathode shows 51% capacity retention over 800 cycles with a fade rate of 0.06% per cycle. The coulombic efficiency of the cell remains at approximately 95%. By adding LiNO3 in the electrolyte, the activated carbon/sulfur composite electrode tested at 800 mA g−1 shows a high coulombic efficiency (>99%). The activated carbon/sulfur composites exhibited similar capacity value and cycling trends with an increase in sulfur content from 60% to 68%. The good electrochemical performance can be attributed to the excellent structural parameters of the activated carbon. The ultrahigh specific surface area and large pore volume not only enhances the sulfur content but also ensures dispersion of elemental sulfur in the conducting framework, thereby improving sulfur utilization. The small nanopores of the activated carbon can effectively inhibit the diffusion of polysulfides during the charge/discharge process.

Mangosteen Peel-Derived Porous Carbon: Synthesis and Its Application in the Sulfur Cathode for Lithium Sulfur Battery

A Novel Mangosteen Peels Derived Hierarchical Porous Carbon for Lithium Sulfur Battery

A Novel Hierarchical Porous Carbon Derived from Durian Shell As Enhanced Sulfur Carrier for High Performance Li-S Batteries

Facile and Scalable Synthesis of Micro-Mesoporous Carbon/magnesium Oxide/sulfur Composite for Lithium-Sulfur Batteries

Activated Carbon with Ultrahigh Specific Surface Area Synthesized from Natural Plant Material for Lithium–sulfur Batteries

Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery

Pomelo Peel-Derived Porous Carbon As Excellent LiPS Anchor in Lithium-Sulfur Batteries

Biomass-Derived Porous Carbon with Micropores and Small Mesopores for High-Performance Lithium-Sulfur Batteries

Hierarchically Porous Carbon Derived from Banana Peel for Lithium Sulfur Battery with High Areal and Gravimetric Sulfur Loading

Preparation and Electrochemical Performance of A Hierarchically Porous Activated Carbon Aerogel /sulfur Cathode for Lithium-Sulfur Batteries

High Sulfur Loading Cathodes Fabricated Using Peapodlike, Large Pore Volume Mesoporous Carbon for Lithium–Sulfur Battery

Porous graphitic carbon loading ultra high sulfur as high-performance cathode of rechargeable lithium-sulfur batteries.

A hierarchical micro/mesoporous carbon fiber/sulfur composite for high-performance lithium-sulfur batteries

Novel Hierarchically Porous Carbon Materials Obtained from Natural Biopolymer As Host Matrixes for Lithium-Sulfur Battery Applications.

Synthesis and Electrochemical Performance of Sulfur–carbon Composite Cathode for Lithium–sulfur Batteries

A Mixed Microporous/Low-range Mesoporous Composite with High Sulfur Loading from Hierarchically-structured Carbon for Lithium Sulfur Batteries

Preparation of Macadamia Nut Shell Porous Carbon and Its Electrochemical Performance As Cathode Material for Lithium–sulfur Batteries

Built‐in Carbon Nanotube Network Inside a Biomass‐Derived Hierarchically Porous Carbon to Enhance the Performance of the Sulfur Cathode in a Li‐S Battery

A One-Step Hard-Templating Method for the Preparation of a Hierarchical Microporous-Mesoporous Carbon for Lithium-Sulfur Batteries

Biomass Waste Inspired Highly Porous Carbon for High Performance Lithium/Sulfur Batteries

Preparation and Electrochemical Performance of Sulfur/ Mesoporous Carbon Composites As Cathodes for Lithium-Sulfur Batteries