Abstract:Lithium sulfur (Li-S) batteries have been intensively concerned in recent years as next generation Li batteries1. Compared with state-of-the-art Li-ion batteries, Li-S batteries own ultrahigh theoretical capacity and energy density, which are considered as most promising candidates applied to electric vehicles and hybrid electric vehicles. However, insulation of sulfur and dissolution of polysulfides are two main issues in sulfur cathodes which hinder the cycle life and application safety of Li-S batteries. To overcome these issues, developing conductive hosts and coating materials are prevailing approaches to improve the performance of Li-S batteries. Herein, we report molecular layer deposited (MLD) alucone coating and nanoscale metal organic framework derived carbon (MOF-C) confined sulfur cathodes in Li-S batteries. Surface coating with carbon or metal oxides has been proven to be a promising approach towards mitigating the shuttle effect in Li-S batteries. An ideal coating material should both cover on based material completely to prevent sulfur migration and also allow Li-ions and electrons transferring through smoothly. Based on these requirements, atomic and molecular layer deposition (ALD and MLD) are ideal technique to synthesize ultrathin and conformal coatings due to the self-limiting nature2 , 3. For the first time, we demonstrate that an MLD alucone coating directly on sulfur electrodes can dramatically improve the cycling stability and capability of Li-S cells. Furthermore, the alucone coated sulfur cathode delivers a discharge capacity of 710 mAh g-1, which is over two times higher than the bare sulfur cathode after 100 cycles4. The alucone coating demonstrated long durability during cell cycling, which explores a new direction in the protection of sulfur cathodes. Porous structured materials are prevailing in sulfur cathode to confine sulfur molecule in host materials. Herein, we developed a new carbon family, metal organic framework derived carbon materials (MOF-Cs) with tunable porous structure via in-situ ammonia treatment5. The ammonia treated MOF-C as carbon host shows an impressive improvement on sulfur cathodes, which performed twice higher discharge capacity retention than that of the pristine MOF-C. This research sheds light to design MOF-C materials with controlled nanostructure not only for Li–S batteries, but also for expanded applications in different energy storage systems. References 1 Bruce, P. G., Freunberger, S. A., Hardwick, L. J. & Tarascon, J. M. Li-O2 and Li-S batteries with high energy storage. Nature materials11, 19-29, (2012). 2 Meng, X., Yang, X. Q. & Sun, X. Emerging applications of atomic layer deposition for lithium-ion battery studies. Adv Mater24, 3589-3615, (2012). 3 Li, X. et al. Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application. Energy & Environmental Science7, 768, (2014). 4 Li, X., Lushington, A., Liu, J., Li, R. & Sun, X. Superior stable sulfur cathodes of Li-S batteries enabled by molecular layer deposition. Chem Commun (Camb)50, 9757-9760, (2014). 5 Li, X. et al. Tunable porous structure of metal organic framework derived carbon and the application in lithium–sulfur batteries. J Power Sources 302, 174-179, (2016). Figure 1

A Microporous-Mesoporous Carbon with Graphitic Structure for a High-Rate Stable Sulfur Cathode in Carbonate Solvent-Based Li-S Batteries.

A High-Energy Sulfur Cathode in Carbonate Electrolyte by Eliminating Polysulfides Via Solid-Phase Lithium-Sulfur Transformation

Facile and Scalable Synthesis of Micro-Mesoporous Carbon/magnesium Oxide/sulfur Composite for Lithium-Sulfur Batteries

Revealing Localized Electrochemical Transition of Sulfur in Sub-nanometer Confinement

Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery

Constructing 1D/2D Interwoven Carbonous Matrix to Enable High-Efficiency Sulfur Immobilization in Li-S Battery

Sulfur Cathode Based on Layered Carbon Matrix for High-Performance Li–S Batteries

Three-dimensionally Ordered, Ultrathin Graphitic-Carbon Frameworks with Cage-Like Mesoporosity for Highly Stable Li-S Batteries

Built‐in Carbon Nanotube Network Inside a Biomass‐Derived Hierarchically Porous Carbon to Enhance the Performance of the Sulfur Cathode in a Li‐S Battery

Catalytic Solid‐State Sulfur Conversion Confined in Micropores toward Superhigh Coulombic Efficiency Lithium‐Sulfur Batteries

Sulfur-infiltrated porous carbon microspheres with controllable multi-modal pore size distribution for high energy lithium–sulfur batteries

Molecular Scale Coating and Nanoscale Carbon Cage Confined Sulfur Cathodes Applied in Lithium Sulfur Batteries

Flexible and Self-Supported Sulfur Cathode for High-Energy-Density Lithium-Sulfur Batteries

Encapsulating Sulfur into a Gel-Derived Nitrogen-Doped Mesoporous and Microporous Carbon Sponge for High-Performance Lithium-Sulfur Batteries

Synergistic Electrocatalyst-Cathode Architecture for Stable Long-Term Cycling Lithium-Sulfur Batteries

Interconnected Microporous and Mesoporous Carbon Derived from Pitch for Lithium–Sulfur Batteries

Unusual Mesoporous Carbonaceous Matrix Loading with Sulfur As the Cathode of Lithium Sulfur Battery with Exceptionally Stable High Rate Performance

Silicon dioxide molecular sieve with mono-layer carbon deposited in the channels and carbon nanotubes on the outside for lithium–sulfur batteries

Confining Small Sulfur Molecules in Peanut Shell-Derived Microporous Graphitic Carbon for Advanced Lithium Sulfur Battery

Multilevel structured carbon film as cathode host for Li-S batteries with superhigh-areal-capacity

Nitrogen-doped microporous carbon with narrow pore size distribution as sulfur host to encapsulate small sulfur molecules for highly stable lithium-sulfur batteries