Abstract:Heavy metal wastewater poses a serious threat to the environment. In comparison to the existing methods of chemical precipitation, ion exchange and carbon adsorption, biosorption is an attractive alternative for the recovery of heavy metals from industrial effluents. However, nickel ion, different from other heavy metal ions, is a more recalcitrant pollutant and has low affinity to many metal tolerant microorganisms. In this study, Escherichia coli JM109 was genetically engineered to simultaneously express a Ni2+ transport system (the product of nixA gene) andoverexpress metallothionein (MT). NixA protein has a high affinity for Ni2+, and metallothioneins (MTs) are capable of binding a variety of heavy metals including Ni2+ . The Ni2+ bioaccumulation performance of the genetically engineered E. coli JM109 was evaluated. Time-course test showed that the bioaccumulation rate was rapid, and 95% of the accumulation was achieved within the first 10 minutes. The maximum Ni2+ bioaccumulation by genetically engineered E. coli cells was dramatically increased from 1.54 mg/g to 10.11mg/g, a more than five-fold increase than that of the original E. coli strain. The isotherm was of Langmuir type. Within the tested pH range (pH 4-10), the engineered cells displayed more resistance to pH variation, retaining up to 80% of the Ni2+ binding capacity at pH 4, while the original E. coli host cells lost 80% of Ni2+ binding capacity at pH 4. The presence of Na+ and Ca2+ affected Ni2+ bioaccumulation, but the effects were not serious, as 71% and 66% of the Ni2+ binding capacities were retained respectively at the concentrations of 1000 mg/L Na+ and 1000 mg/L Ca2+ . However, Mg2+ exerted a severe adverse effect on Ni2+ bioaccumulation, 83% of Ni2+ accumulating capacity was lost when Mg2+ concentration reached 200 mg/L. The effects of different kinds of heavy metals on Ni2+ accumulating were different. The genetically engineered E. coli cell lost less than 45% of its Ni2+ bioaccumulation activity in the presence of 50 mg/L lead or cadmium, 66% in the presence of 25mg/L mercury and 84% in the presence of 40 mg/L copper. The presence of glucose did not improve Ni2+ uptake. Our study suggests that the genetically engineered E. coli JM109 has potential application for effective and efficient recovery of nickel from aqueous solutions.

Treatment of Wastewater Containing High Concentration Nickel Ions with Precipitation-Microfiltration-complexation-ultrafiltration Processes

A Comparative Study Of Nickel(Ii) Removal From Electroplating Wastewater By Pre-Precipitation Combined With Fenton-Precipitation Or Fenton-Like-Precipitation

The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

[Uptake of Nickel from Industrial Wastewater by Genetically Engineered Escherichia Coli JM109].

Negatively-charged Nanofiltration Membrane and Its Hexavalent Chromium Removal Performance.

Influence of Some Parameters on Membrane-Free Electrodeionization for the Purification of Wastewater Containing Nickel Ions

Removal of Nickel Ions in Aqueous Solution Via Micellar Enhanced Ultrafiltration

Removal of low concentrations of nickel ions in electroplating wastewater by combination of electrodialysis and electrodeposition

Application of a Novel Strategy—advanced Fenton-chemical Precipitation to the Treatment of Strong Stability Chelated Heavy Metal Containing Wastewater

Treatment of Electroplating Wastewater Containing Nickel by Fenton Oxidation-Ferrite Process

Membrane-free Electrodeionization for Purification of Wastewater Containing Low Concentration of Nickel Ions

Efficient removal of nickel(II) from high salinity wastewater by a novel PAA/ZIF-8/PVDF hybrid ultrafiltration membrane.

Experimental study on the treatment of highly concentrated electroplating nickel-containing waste liquid by electrolytic method

A novel electrochemical membrane filtration system operated with periodical polarity reversal for efficient resource recovery from nickel nitrate laden industrial wastewater

Biofouling/acid resistant nanofiltration membranes interfacially polymerized with nickel-doped carbon dots for highly efficient removal and real-time monitoring of chromate in wastewater

Separation of Copper and Nickel Metal Ions from Electroplating Wastewater by Ultrafiltration with Tartaric Acid and Sodium Citrate Reinforced Sodium Polyacrylate Complexation

Separation of nickel ions from aqueous solution by micellar enhanced ultrafiltration

Combination of TiCl 3 reduction/coagulation and ceramic membrane filtration for heavy metal complex removal

TREATMENT AND REUSE OF NICKEL PLATING RINSING WATER BY ION EXCHANGE PROCESS

Validation of a Combined Fe(III)/UV/NaOH Process for Efficient Removal of Carboxyl Complexed Ni from Synthetic and Authentic Effluents.

Studying Different Operating Conditions on Reverse Osmosis Performance in the Treatment of Wastewater Containing Nickel (II) Ions