Abstract:Metal-organic complexes, especially those of ethylenediaminetetraacetic acid (EDTA) with metals such as copper (Cu) and nickel (Ni) (denoted here as Cu-EDTA and Ni-EDTA), are common contaminants in wastewaters from chemical and plating industries. In this study, a multi-electrode (ME) system using a two-chamber reactor and two pairs of electrodes is proposed for simultaneous electrochemical oxidation of a wastewater containing both Cu-EDTA and Ni-EDTA complexes as well as separation and selective recovery of Cu and Ni onto two different cathodes via electrodeposition. Our results demonstrate that the ME system successfully achieved 90% EDTA removal, 99% solid Cu recovery at the Cu recovery cathode and 56% Ni recovery (33.3% on the Ni recovery cathode and 22.6% in the solution) after a four-hour operation. The system further achieved 85.5% Ni recovery after consecutive five cycles of operation for 20 h. While Cu removal was mainly driven by the direct reduction of EDTA-complexed Cu(II) at the cathode, oxidation of EDTA within the Ni-EDTA complex at the anode was a prerequisite for Ni removal. The oxidation of metal-bound EDTA and free EDTA was driven by •OH and direct electron transfer on the PbO2 anode surface and graphite anode, respectively. We further show that ME system performs well for all pH conditions, treatment of real wastewaters as well as wastewaters containing other metals ions (Cr and Zn) along with Cu/Ni. The separation efficiency of Cu and Ni is dependent on applied electrode potential as well as nature and concentration of binding ligand present with comparatively lower separation efficiency achieved in the presence of weaker binding capacity and/or at lower ligand concentration and lower applied electrode potential. As such, some optimization of electrode potential is required depending on the nature/concentration of ligands in the wastewaters. Overall, this study provides new insights into the design and operation of EAOP technology for effective organic abatement and metal recovery from wastewaters containing mixtures of various metal-organic complexes.

Combination of TiCl 3 reduction/coagulation and ceramic membrane filtration for heavy metal complex removal

The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

Electrochemical Removal of Metal-Organic Complexes in Metal Plating Wastewater: A Comparative Study of Cu-EDTA and Ni-EDTA Removal Mechanisms.

Cationic Surfactant-Mediated Coagulation for Enhanced Removal of Toxic Metal-Organic Complexes: Performance, Mechanism, and Validation

Simultaneous chelated heavy metals removal and sludge recovery through titanium coagulation: From waste to resource

A synergistic strategy for the removal and secondary utilization of Cu(II) organic complexes in wastewater for the efficient degradation of tetracycline

A New Combined Process for Efficient Removal of Cu(II) Organic Complexes from Wastewater: Fe(III) Displacement/uv Degradation/alkaline Precipitation

Efficient Removal of EDTA-complexed Cu(II) by a Combined Fe(III)/UV/alkaline Precipitation Process: Performance and Role of Fe(II).

Preparation of EDTA-modified Magnetic Attapulgite Chitosan Gel Bead Adsorbent for the Removal of Cu(II), Pb(II), and Ni(II).

Removal of low concentrations of nickel ions in electroplating wastewater by combination of electrodialysis and electrodeposition

High-efficient Technique to Simultaneous Removal of Cu(II), Ni(II) and Tannic Acid with Magnetic Resins: Complex Mechanism Behind Integrative Application

Efficient removal of Cu(II) from an aqueous solution using a novel chitosan assisted EDTA-intercalated hydrotalcite-like compound composite: Preparation, characterization, and adsorption mechanism

Decomplexation of Cr(III)-EDTA and simultaneous abatement of total Cr by photo-oxidation: efficiency and in situ reduction of intermediate Cr(VI)

Multiprocess catalyzed Cu-EDTA decomplexation by non-thermal plasma coupled with Fe/C microelectrolysis: Reaction process and mechanisms

Efficient removal of Tetracycline-Cu complexes from water by electrocoagulation technology

Simultaneous Cu(II)-EDTA decomplexation and Cu(II) recovery using integrated contact-electro-catalysis and capacitive deionization from electroplating wastewater

Enhanced ozonation of Cu(II)-organic complexes and simultaneous recovery of aqueous Cu(II) by cathodic reduction

Efficient One-Step Removal and Immobilization of Recalcitrant Cr(III) and Cr(VI) Fractions in Real Electroplating Wastewater Using Electrolysis with O2 Aeration

Efficient removal of copper and silver ions in electroplating wastewater by magnetic-MOF-based hydrogel and a reuse case for photocatalytic application

Electrochemical treatment of wastewaters containing metal-organic complexes: A one-step approach for efficient metal complex decomposition and selective metal recovery

Elegant cooperativity of noncovalent interactions in effective removal of Cu–EDTA from water via stepwise addition of polymer and surfactant