Abstract:The fabrication art of the membrane electrode assembly (MEA) in a proton-exchange membrane (PEM) fuel cell strongly correlates to the cell performance. It has been recognized that defects, for example, high interfacial resistance between the catalyst layers (CLs) and the membrane or cracks in the CLs, may occur during the MEA manufacturing process. These defects could greatly influence the electrochemical performance of the fuel cell. To eliminate those defects and improve the cell performance, in this study, a novel fabrication approach of the MEA for PEM fuel cells is developed. With this method, the Nafion ionomer, employed as a PEM, is directly coated onto both the cathode and anode CLs. As a result, not only an excellent interfacial connection between the PEM and CLs is achieved with a low interfacial resistance, but also cracks are eliminated due to Nafion ionomer penetration into the cracks, forming hydrophilic channels with ionic conduction. Those ionic conduction channels improve the water management, lower the mass transport loss, and facilitate the proton transfer, thus maximizing the three-phase boundary and enhancing the utilization of Pt/C catalysts. By adding an expanded polytetrafluoroethylene film, a favorable mechanical property of the MEA is also achieved. This novel MEA exhibits excellent cell performance under low humidity conditions. Under the H<sub>2</sub>/air operation, the cell performance reaches a high maximum power density of 1.35 W cm<sup>–2</sup>.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c02386?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c02386</a>.SEM images, photographs of MEAs and fitted impedance parameters for the MEAs (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c02386/suppl_file/sc0c02386_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Optimum of Catalyst Layers for Direct Methanol Fuel Cells

Optimization of Membrane Electrode Assembly in Air-Breathing Direct Methanol Fuel Cell

Determination of Ionic Resistance and Optimal Composition in the Anodic Catalyst Layers of DMFC Using AC Impedance

Anode Sub-Layer in Membrane Electrode Assembly of DMFC

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

Gradient design of Pt/C ratio and Nafion content in cathode catalyst layer of PEMFCs

Anode Catalytic Dependency Behavior on Ionomer Content in Direct CO Polymer Electrolyte Membrane Fuel Cell

Influence of ionomer content on the structure and performance of PEFC membrane electrode assemblies

A hybrid cathode catalytic layer composed of M–N–C and Pt/C for direct methanol fuel cells with high methanol tolerance

Influence of intermediate liquid electrolyte layer on the performance of passive direct methanol fuel cell

Influence of preparation process of MEA with mesocarbon microbeads supported Pt–Ru catalysts on methanol electrooxidation

Constructing a graphene-contained layer in anode to improve the performance of direct methanol fuel cells using high-concentration fuel

The Influences of Multi-Walled Carbon Nanotube Addition to the Anode on the Performance of Direct Methanol Fuel Cells

Preparation and Simulation of an Additional Catalyst Layer for Direct Methanol Fuel Cell

Effect of the Microporous Layer Structure and Hydrophobicity on the Performance of Direct Methanol Fuel Cells

A Novel Approach to Fabricate Membrane Electrode Assembly by Directly Coating the Nafion Ionomer on Catalyst Layers for Proton-Exchange Membrane Fuel Cells

High-performance anode for Polymer Electrolyte Membrane Fuel Cells by multiple-layer Pt sputter deposition

Enhanced MEA Performance for PEMFCs under Low Relative Humidity and Low Oxygen Content Conditions Via Catalyst Functionalization

Performance improvement of ultra-low Pt proton exchange membrane fuel cell by catalyst layer structure optimization

A Novel Impregnation-Reduction Method Combined with Galvanic Replacement for Fabricating Low Cost MEA with High Performance for PEM Fuel Cells

Effect of catalyst layer with zeolite on the performance of a proton exchange membrane fuel cell operated under low-humidity conditions