Abstract:To understand the effect of Co addition on the modulated structure coarsening and discontinuous precipitation (DP) growth kinetics of Cu–15Ni–8Sn alloy, the experiments are carried out using optical microscope (OM), scanning electron microscope (SEM) and transmission electron microscopy (TEM). Our results showed that the addition of Co in Cu–15Ni–8Sn alloy did not recover with a new second-phase associated with Co. During the aging treatment process, the addition of Co reduced the coarsening kinetics of the modulated structure, which was related to the equilibrium solid solubility (Xe) of Ni and Sn in Cu, diffusion coefficient of Ni and Sn in Cu (D), and to the interfacial energy (σ) of α-Cu matrix/L12. The decrease in values of Xe, D and σ were resulted in a slowdown of the coarsening kinetics. Further, the suitable addition of Co significantly inhibited the nucleation and growth of discontinuous precipitation (DP). The growth kinetics of DP for Cu–15Ni–8Sn-xCo alloy were evaluated using the Johnson-Mehl-Avrami-Kolmogorov equation. With the combination of the Arrhenius equation, the activation energies (Q) of the samples were 105.45 kJ/mol, 150.76 kJ/mol, 178.44 kJ/mol, 251.53 kJ/mol, and 148.89 kJ. Compared with cobalt-free alloy, cobalt-containing alloys exhibited greater activation energy, which suggested that the addition of Co can greatly inhibit the formation of DP. Furthermore, the addition of Co led to decrease in the thickness of the grain boundary and increase in the interlamellar spacing of the DP, which were considered to be the main reasons for suppressing the growth of DP.

Effects of Precipitant and Ph on Coprecipitation of Nanosized Co-Cr-V Alloy Powders.

Crystallization Kinetics of Co-Finemet Amorphous Alloys and Magnetic Properties of Nanocrystalline Powder Cores

Effect of cobalt on precipitation in Fe-Cr-Co-Mo-Ni-C stainless steels

Effect of Precipitant on Preparation of Ni–Co Spinel Oxide by Coprecipitation Method

Progress in Research on Nanoprecipitates in High-Strength Conductive Copper Alloys: a Review

Effect of Cr content on precipitation behavior of (CoCrNi)94Ti3Al3 medium entropy alloys

Precipitation Behavior and Mechanical Properties of Ti-Ni-Nb-Co Alloys

Synthesis And Characterization Of Ca2co2o5 Powders By Coprecipitation Method

The effect of Co addition on the modulated structure coarsening and discontinuous precipitation growth kinetics of Cu–15Ni–8Sn alloy

Investigating the effect of pH on the growth of coprecipitated Ni0.8Co0.1Mn0.1(OH)2 agglomerates as precursors of cathode materials for Li-ion batteries

Investigation on the Preparation and Properties of Monodispersed Al2O3ZrO2 Nanopowder Via Co-precipitation Method

Nano-scale precipitates formed in Cu-Co based alloys and their magnetic properties

Effect of Cu on Nanoscale Precipitation Evolution and Mechanical Properties of a Fe-NiAl Alloy.

Morphology and Magnetic Properties of Nanometer Nico Alloy Powder Prepared by Coprecipitation-Thermal Decomposition Method

Effect of co-precipitation synthesis parameters on gadolinium aluminate nanoparticles

Effect of Co on morphology and preparation of in situ synthesis of WC-Co composite powders

Effect of alloying elements on the coarsening rate of γʹ precipitates in multi-component CoNi-based superalloys with high Cr content

Study on the process and properties of nano-sized polycrystal zirconia powders by co-precipitation in super-alkaline medium

Micro-structure tuning and evolution of hydroxide precursor with radially oriented grains during industrial-scale continuous precipitation process

Effect of Ph Value on the Aqueous Precipitation Copolymerization of Acrylonitrile and Vinyl Acetate

Effects of Cr addition on the constitutive equation and precipitated phases of copper alloy during hot deformation