Abstract:The symmetry breaking that is induced by initial imperfection (e.g., geometry or material inhomogeneity and out-of-plane disturbance) is a necessary condition for film buckling. However, the effect of initial imperfection on the buckling behavior is still not clear cut. Herein, given an elastic substrate-free circular film subjected to in-plane compressive stress and arbitrary initial imperfection, evolution of the deflection morphology is numerically studied and theoretically analyzed. Specifically, a two-dimensional spatial spectrum analysis is adopted to acquire the deflection morphology's dominant wavelength, which is combined with the maximum absolute deflection to characterize the deflection patterns. Before the so-called critical instability, the film under compression is found to go through a transition stage. Overall, the deflection increment in this stage is negligible except approaching the critical state. However, the dominant wavelength is found to be continuously growing (or decreasing) rather than suddenly appears upon reaching the so-called critical state, and, interestingly, such growth is found to be independent of the intensity and pattern of the initial imperfection if the same initial dominant wavelength is guaranteed. In the discussion, for both the transition and buckling stages, evolution laws of the deflection amplitude and wavelength are established analytically and found to agree well with the numerical results. This research clearly presents the actual evolution process of wrinkling morphology from linear in-plane deformation with small stable deflection to out-of-plane instability with large deflection, which deepens the cognition of instability behavior of films and provides a basis for related applications such as high-precision mechanical characterization.

Surface Wrinkling of an Elastic Graded Layer.

Spatially Configuring Wrinkle Pattern and Multiscale Surface Evolution with Structural Confinement

Surface wrinkling of a film coated to a graded substrate

Buckling And Surface Wrinkling Of An Elastic Graded Cylinder With Elastic Modulus Arbitrarily Varying Along Radial Direction

Surface effects on the wrinkles in a stiff thin film bonded to a compliant substrate

Wrinkle Surface Instability of an Inhomogeneous Elastic Block with Graded Stiffness

Generation of Buckling and Wrinkling in Elastic Films: the Effect of Initial Imperfection.

Buckling and Post-Buckling of A Stiff Film Resting on an Elastic Graded Substrate

Numerical Analysis on the Wrinkling Instability of a Stiff Film Adhering to an Elastic Substrate with a Graded Coating

Mechanism of Surface Wrinkle Modulation for a Stiff Film on Compliant Substrate

First-order and Second-Order Wrinkling of Thin Elastic Film Laminated on a Graded Substrate

Surface Effects On The Wrinkling Of Piezoelectric Films On Compliant Substrates

Computer Simulation of Thin Film Wrinkling on Elastic Substrate

From Wrinkles to Creases in Elastomers: the Instability and Imperfection-Sensitivity of Wrinkling

Surface effect on the wrinkling of an elastic sheet under tension

Wrinkling Behavior of Variable Thickness Films Bonded to Elastic Substrates

Mechanism of Three-Dimensional Surface Wrinkle Manipulation on a Compliant Substrate

Wrinkling and Smoothing of a Soft Shell

Surface Wrinkling of Nanostructured Thin Films on a Compliant Substrate

A Numerical Study of the Wrinkling Evolution of an Elastic Film on a Viscous Layer

Mechanics of micropattern-guided formation of elastic surface instabilities on the polydimethylsiloxane bilayer