Abstract:The symmetry breaking that is induced by initial imperfection (e.g., geometry or material inhomogeneity and out-of-plane disturbance) is a necessary condition for film buckling. However, the effect of initial imperfection on the buckling behavior is still not clear cut. Herein, given an elastic substrate-free circular film subjected to in-plane compressive stress and arbitrary initial imperfection, evolution of the deflection morphology is numerically studied and theoretically analyzed. Specifically, a two-dimensional spatial spectrum analysis is adopted to acquire the deflection morphology's dominant wavelength, which is combined with the maximum absolute deflection to characterize the deflection patterns. Before the so-called critical instability, the film under compression is found to go through a transition stage. Overall, the deflection increment in this stage is negligible except approaching the critical state. However, the dominant wavelength is found to be continuously growing (or decreasing) rather than suddenly appears upon reaching the so-called critical state, and, interestingly, such growth is found to be independent of the intensity and pattern of the initial imperfection if the same initial dominant wavelength is guaranteed. In the discussion, for both the transition and buckling stages, evolution laws of the deflection amplitude and wavelength are established analytically and found to agree well with the numerical results. This research clearly presents the actual evolution process of wrinkling morphology from linear in-plane deformation with small stable deflection to out-of-plane instability with large deflection, which deepens the cognition of instability behavior of films and provides a basis for related applications such as high-precision mechanical characterization.

A Numerical Study of the Wrinkling Evolution of an Elastic Film on a Viscous Layer

Generation of Buckling and Wrinkling in Elastic Films: the Effect of Initial Imperfection.

Surface Wrinkling of an Elastic Graded Layer.

Numerical Analysis on the Wrinkling Instability of a Stiff Film Adhering to an Elastic Substrate with a Graded Coating

Surface effects on the wrinkles in a stiff thin film bonded to a compliant substrate

A Finite Strain Model Predicts Oblique Wrinkles in Stretched Anisotropic Films

Wrinkling Behavior of Variable Thickness Films Bonded to Elastic Substrates

Wrinkle, fold, and ridge patterns of thin films attached to a compliant substrate: Direct numerical simulations involving plastic yielding

Nonlinear Analysis of Compressed Elastic Thin Films on Elastic Substrates: from Wrinkling to Buckle-Delamination

A Consistent Finite-Strain Plate Model for Wrinkling of Stretched Anisotropic Hyperelastic Films

Buckling and Post-Buckling of A Stiff Film Resting on an Elastic Graded Substrate

Radial Wrinkling of Viscoelastic Film-Substrate Systems

Instabilities of Thin Films on a Compliant Substrate: Direct Numerical Simulations from Surface Wrinkling to Global Buckling

Effects of Viscosity and Loading Rate on Wrinkling Dynamics and Coarsening of Floating Sheets

Computer Simulation of Thin Film Wrinkling on Elastic Substrate

Effects of Tension–compression Asymmetry on the Surface Wrinkling of Film–substrate Systems

Wrinkling and Creasing of A Compressed Elastoplastic Film Resting on A Soft Substrate

Emergent antisymmetric wrinkling patterns in films on ridged substrates

Surface Wrinkling of Anisotropic Films Bonded on a Compliant Substrate

Post-Wrinkling Analysis of A Torsionally Sheared Annular Thin Film by Using A Compound Series Method

Surface Wrinkling of Nanostructured Thin Films on a Compliant Substrate