Abstract:Catalytic decomposition of benzene was studied by using oxides of vanadium and tungsten supported on titanium oxide (TiO2) catalysts for effective reduction of emissions of toxic organic compounds from waste incineration. Experiments were conducted to evaluate the effects of the catalyst's composition, and operating conditions on benzene decomposition, and the relationship between molecular structures of catalysts and their activity was also investigated through replacing the conventional TiO2 catalyst support by nano-sized TiO2. Trace levels (1 and 10 ppm) of gaseous benzene were catalytically decomposed in a fixed-bed catalytic reactor with monolithic oxides of vanadium and tungsten supported on titanium oxide (V2O5-WO3/TiO2) catalysts under conditions simulating the cooling of waste incineration flue gas. On-line monitoring of trace benzene concentrations before and after the catalyst was achieved by means of resonance enhanced multiphoton ionization-time of flight mass spectrometry (REMPI-TOFMS). Catalysts were characterized by nitrogen adsorption, X-ray diffraction, energy dispersive X-ray spectroscopy, temperature-programmed reduction, and Raman spectroscopy. The effects of several parameters, including catalyst operating temperature, space velocity (SV) and initial benzene concentration, on catalytic oxidation of benzene were investigated. Experimental results indicate that reduction of the initial benzene concentration from 10 to 1 ppm either enhances or decreases the catalytic removal efficiency depending on the adsorption capability as well as the oxidation ability of the catalyst tested. The catalytic activity for benzene oxidation not simply relies on the vanadium content of the catalyst; the molecular structure of vanadium oxide, which is known to be influenced by both vanadium oxide loading and the type of support, is very important. Nano-sized TiO2 supported vanadium oxide catalyst (VWNT) with lowest V loading (0.75 wt.%) provides higher catalytic activity than those of the catalysts with higher V contents (1.31 and 2.92 wt.%) but supported by conventional TiO2 (VWT1 and VWT2). The relatively higher catalytic activity of VWNT may be attributed to: (a) the presence of monomeric VOx species, with one terminal V=O bond as indicated by Raman spectra; (b) fewer impurities confounding active catalytic constituents (V, W and Ti); (c) pure anatase phase of TiO2 rather than a mixture phase of anatase and rutile servicing as catalyst support besides its nano-scale particle size; (d) larger specific surface area, smaller average pore diameter, and narrower pore size distribution contribute higher adsorption ability for benzene. No obvious competition effect between NOx removal and benzene oxidation was observed in this study. Reaction rate constants and activation energies for benzene catalytic oxidation tested by the catalysts were calculated. Lower activation energy obtained from VWNT than those of the two catalysts further confirming the higher catalytic activity of VWNT. Published by Elsevier B.V.

Direct Hydroxylation of Benzene to Phenol Mediated by Nanosized Vanadium Oxide Cluster Ions at Room Temperature

Two Robust Polyoxovanadate Clusters Having a Square-Prism V10Ox Core for Efficient Catalysis of Benzene Hydroxylation to Phenol

Amorphous Vanadium Oxide Supported on Activated Carbon Prepared by Dielectric Barrier Discharge as an Efficient and Stable Catalyst for Hydroxylation of Benzene to Phenol

Direct Hydroxylation of Benzene to Phenol Using H2o2 As an Oxidant over Vanadium-Containing Nitrogen Doped Mesoporous Carbon Catalysts

Experimental and Theoretical Studies of the Reactions Between Vanadium Oxide Cluster Anions and Small Hydrocarbon Molecules

Study on the Decomposition of Trace Benzene over V2O5–WO3/TiO2-based Catalysts in Simulated Flue Gas

Vanadium Supported on Graphitic Carbon Nitride As A Heterogeneous Catalyst for the Direct Oxidation of Benzene to Phenol

Vanadium-Containing Mesoporous Carbon and Mesoporous Carbon Nanoparticles As Catalysts for Benzene Hydroxylation Reaction

Light‐Induced Efficient Hydroxylation of Benzene to Phenol by Quinolinium and Polyoxovanadate‐Based Supramolecular Catalysts

Catalytic Oxidation of 1,2-Dcbz over V2O5/TiO2-CNTs: Effect of CNT Diameter and Surface Functional Groups.

The Direct Hydroxylation of Benzene to Phenol Catalyzed by Fe-ZSM-5 Zeolite: A DFT and Hybrid MP2:DFT Calculation

A theoretical study of the oxidation of benzene by manganese oxide clusters: formation of quinone intermediates

Selective Oxidation of Toluene Using Surface-Modified Vanadium Oxide Nanobelts

Photocatalytic Cascade Reaction Driven by Directed Charge Transfer over VS‐Zn0.5Cd0.5S/GO for Controllable Benzyl Oxidation

Theoretical study on mechanism of benzene to phenol over VAPO-5 molecular sieve

Catalytic Hydroxylation of Benzene to Phenol with Hydrogen Peroxide over Cesium Salts of Keggin-type Heteropoly Acids

Gas-phase reactions of cationic vanadium-phosphorus oxide clusters with C2Hx (x=4, 6): A DFT-based analysis of reactivity patterns

Cu-dopedmesoporous VO_x-TiO_2 incatalytic hydroxylation of benzene to phenol

Single Atomic Cu-N2 Catalytic Sites for Highly Active and Selective Hydroxylation of Benzene to Phenol

Combined Computational and Experimental Investigation on the Fenton Reagent Catalysed Hydroxylation of Benzene

Hydrogen Peroxide Assisted Electrooxidation of Benzene to Phenol over Bifunctional Ni–(O–C2)4 Sites