Abstract:Catalytic decomposition of benzene was studied by using oxides of vanadium and tungsten supported on titanium oxide (TiO2) catalysts for effective reduction of emissions of toxic organic compounds from waste incineration. Experiments were conducted to evaluate the effects of the catalyst's composition, and operating conditions on benzene decomposition, and the relationship between molecular structures of catalysts and their activity was also investigated through replacing the conventional TiO2 catalyst support by nano-sized TiO2. Trace levels (1 and 10 ppm) of gaseous benzene were catalytically decomposed in a fixed-bed catalytic reactor with monolithic oxides of vanadium and tungsten supported on titanium oxide (V2O5-WO3/TiO2) catalysts under conditions simulating the cooling of waste incineration flue gas. On-line monitoring of trace benzene concentrations before and after the catalyst was achieved by means of resonance enhanced multiphoton ionization-time of flight mass spectrometry (REMPI-TOFMS). Catalysts were characterized by nitrogen adsorption, X-ray diffraction, energy dispersive X-ray spectroscopy, temperature-programmed reduction, and Raman spectroscopy. The effects of several parameters, including catalyst operating temperature, space velocity (SV) and initial benzene concentration, on catalytic oxidation of benzene were investigated. Experimental results indicate that reduction of the initial benzene concentration from 10 to 1 ppm either enhances or decreases the catalytic removal efficiency depending on the adsorption capability as well as the oxidation ability of the catalyst tested. The catalytic activity for benzene oxidation not simply relies on the vanadium content of the catalyst; the molecular structure of vanadium oxide, which is known to be influenced by both vanadium oxide loading and the type of support, is very important. Nano-sized TiO2 supported vanadium oxide catalyst (VWNT) with lowest V loading (0.75 wt.%) provides higher catalytic activity than those of the catalysts with higher V contents (1.31 and 2.92 wt.%) but supported by conventional TiO2 (VWT1 and VWT2). The relatively higher catalytic activity of VWNT may be attributed to: (a) the presence of monomeric VOx species, with one terminal V=O bond as indicated by Raman spectra; (b) fewer impurities confounding active catalytic constituents (V, W and Ti); (c) pure anatase phase of TiO2 rather than a mixture phase of anatase and rutile servicing as catalyst support besides its nano-scale particle size; (d) larger specific surface area, smaller average pore diameter, and narrower pore size distribution contribute higher adsorption ability for benzene. No obvious competition effect between NOx removal and benzene oxidation was observed in this study. Reaction rate constants and activation energies for benzene catalytic oxidation tested by the catalysts were calculated. Lower activation energy obtained from VWNT than those of the two catalysts further confirming the higher catalytic activity of VWNT. Published by Elsevier B.V.

Vanadium-Containing Mesoporous Carbon and Mesoporous Carbon Nanoparticles As Catalysts for Benzene Hydroxylation Reaction

Vanadium Supported on Graphitic Carbon Nitride As A Heterogeneous Catalyst for the Direct Oxidation of Benzene to Phenol

Amorphous Vanadium Oxide Supported on Activated Carbon Prepared by Dielectric Barrier Discharge as an Efficient and Stable Catalyst for Hydroxylation of Benzene to Phenol

In Situ Fabrication of Highly Active Γ-Mno2/smmno3 Catalyst for Deep Catalytic Oxidation of Gaseous Benzene, Ethylbenzene, Toluene, and O-Xylene.

Direct Hydroxylation of Benzene to Phenol Using H2o2 As an Oxidant over Vanadium-Containing Nitrogen Doped Mesoporous Carbon Catalysts

Novel Vanadia/meso-Co3O4 catalysts for the conversion of benzene-toluene-xylene to environmental friendly components via catalytic oxidation

Generalized and High Temperature Synthesis of a Series of Crystalline Mesoporous Metal Oxides Based Nanocomposites with Enhanced Catalytic Activities for Benzene Combustion

A Vanadyl Complex Grafted to Periodic Mesoporous Organosilica: a Green Catalyst for Selective Hydroxylation of Benzene to Phenol.

Cerium Promoted V-g-C3N4 As Highly Efficient Heterogeneous Catalysts for the Direct Benzene Hydroxylation

Oxygen-dependent Catalytic Activity of Mesoporous MnCO3-based Catalysts for Highly Effective Benzene Oxidation

Direct hydroxylation of benzene to phenol on Cu–V bimetal modified HMS catalysts

Study on the Decomposition of Trace Benzene over V2O5–WO3/TiO2-based Catalysts in Simulated Flue Gas

Regulation of Oxygen Vacancies in MnCO3-based Catalysts by Thermally Inducing for Efficiently Catalytic Benzene Combustion

Synthesis and Characterization of V-HMS Employed for Catalytic Hydroxylation of Benzene

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Synthesis of Hierarchical MeAPO-5 Molecular Sieve and Optimization of its Catalytic Oxidation of Benzene to Phenol Based on Response Surface Method

Oxygen-dependent catalytic activity of mesoporous MnCO 3 -based catalysts for highly effective benzene oxidation

Enhanced Catalytic Activity over Vanadium-Containing Silylated SBA-15 Catalysts for Styrene Epoxidation and Benzene Hydroxylation

Cu-dopedmesoporous VO_x-TiO_2 incatalytic hydroxylation of benzene to phenol

Vanadium oxide supported on mesoporous MCM-41 as new catalysts for dehydrogenation of ethylbenzene with CO2

Liquid Phase Hydroxylation of Benzene to Phenol over Vanadyl Acetylacetonate Supported on Amine Functionalized SBA-15