Abstract:A magnesium–aluminum-layered double hydroxide (Mg-Al LDH) with a nano-lamellar morphology was prepared by using a homogeneous precipitation and hydrothermal method, and a calcination product (Mg-Al LDO) of the Mg-Al LDH was also obtained in this work. The XRD, TEM, SEM, FTIR, N2 ad/desorption, and TG-DTG techniques were employed to characterize the microstructures, morphologies, and thermostability levels of these two materials in detail. The results showed that both the Mg-Al LDH and Mg-Al LDO had mesoporous structures and nanoplate morphologies, with diameters of 50~200 nm. The Mg-Al LDH was transformed into Mg-Al LDO at 773 K in an air atmosphere. The adsorption properties of the Mg-Al LDH were investigated systematically with a copper chloride solution as a simulated waste. The experimental results demonstrated that the pH value of the solution had an obvious influence on its Cu2+ adsorption capacity, and the optimal pH value was approximately 5.0. The adsorption kinetics results showed that the Mg-Al LDH had a rapid adsorption rate, and the equilibrium adsorption capacity was 62.11 mg/g. Additionally, the Cu2+ adsorption could be commendably described using a pseudo-second-order model, demonstrating that the adsorption behavior is regulated by chemical sorption. The adsorption thermodynamic results indicated that the adsorption process was spontaneous at temperatures above 318 K. Moreover, the ΔG0 values decreased as the temperature was raised, which indicated that a higher temperature can cause a greater impetus for Cu2+adsorption. In addition, the positive values of the ΔH0 indicated that the Cu2+ adsorption was endothermic, and the positive ΔS0 values revealed an increase in the confusion at the solid–liquid interface of the adsorbent.

Synthesis and Characterization of Mn Intercalated Mg-Al Hydrotalcite.

In-Situ X-Ray Diffraction Study on Mlni(3.75)Co(0.75)Mn(0.3)Al(0.2) During Electrochemical Hydriding-Dehydriding Process

Synthesis of High-Crystallinity Mg-Al Hydrotalcite with a Nanoflake Morphology and Its Adsorption Properties for Cu2+ from an Aqueous Solution

Stability of hydrotalcite (Mg-Al layered double hydroxide) in presence of different anions

Synthesis and Characterization of the Mixed Mg/Al Hydrotalcite‐Like Compounds

Synthesis and Thermal Stability of Oxalate-intercalated Hydrotalcites

Adsorption of Nitrate and Nitrite from Aqueous Solution Onto Calcined (mg–al) Hydrotalcite of Different Mg/Al Ratio

Study on Adsorption Properties of Calcined Mg–Al Hydrotalcite for Sulfate Ion and Chloride Ion in Cement Paste

Structure and Base Properties of Calcined Hydrotalcites

Nitrate adsorption from aqueous solutions by calcined ternary Mg-Al-Fe hydrotalcite

Synthesis and Surface Acid/Base Properties of Magnesium-Aluminum Mixed Oxides Obtained from Hydrotalcites

Synthesis of Mg-Al Hydrotalcite Clay with High Adsorption Capacity

Synthesis and Characterization of Intercalation Assembled Supermolecular Structure Anion Pillared Hydrotalcites

Preparation and Characterization of Lauryl Sulfate Anion Intercalated Hydrotalcite-Montmorillonite

In Situ Growth Process of Mg-Al Hydrotalcite Conversion Film on Az31 Mg Alloy

SYNTHESIS OF MAGNESIUM-ALUMINUM MIXED OXIDE FROM HYDROTALCITE AND ITS PERFORMANCES AS CATALYTIC SUPPORT

Dual‐Functional NiMg2−x Ca x Al‐Hydrotalcite for Integrated CO2 Capture and In Situ Methanation

Preparation of Magnesium Aluminum Hydrotalcite with Orderly Porous Structure by Colloidal Crystal Template

Study of the corrosion mechanism of the in situ grown Mg-Al-CO 3 2- hydrotalcite film on AZ31 alloy

Crystal structure stability and catalytic activity of magnetoplumbite (MP) catalyst doped with Mn and Mg

Reconstruction and hydration of hydrotalcite response to thermal activation temperature: Enhancement of properties for magnesia castables