Abstract:CO 2 capture and utilisation (CCU) is a promising strategy to effectively mitigate the adverse greenhouse effects caused by CO 2 emissions at an industrial scale. Through a process intensification strategy known as integrated CO 2 capture and utilisation (ICCU), CO 2 capture and catalytic CO 2 conversion can be achieved in a single process with the use of dual function materials (DFMs), which are both CO 2 sorbents and CO 2 conversion catalysts. Given the significantly different operating conditions of ICCU from conventional catalytic CO 2 hydrogenation, the catalytic mechanism of DFMs, especially during CO 2 hydrogenation, needs to be thoroughly investigated. In this study, the relationship between the nature of the Ni/carbonate interfaces and the performance of Ni-based DFMs over ICCU cycles is systematically investigated. A series of Ni/alkaline earth carbonate DFMs were synthesised with varying Ca:Mg ratios to simulate different metal-carbonate model interfaces. At 400 °C, CH 4 formation with nearly 100% CH 4 selectivity was achieved on Ni/CaCO 3 over 15 ICCU cycles. In general, Ni/CaCO 3 interfaces correspond to higher CO 2 conversion and higher CH 4 selectivity than Ni/MgCO 3 interfaces. Such trend may be attributed to the higher surface basicity of CaO and the higher thermal stability of CaCO 3 . As a consequence, the hydrogenation of the Ni/CaCO 3 interface proceed via the formate pathway, in which carbonates are consecutively converted to surface formates, methoxyl, methyl species and eventually desorb as methane. This reaction model is applicable to the hydrogenation of both surface carbonate and bulk carbonates, although the former proceeds with much faster kinetics. On the weakly alkaline Ni/MgCO 3 interface, MgCO 3 preferentially decomposes to form gaseous CO 2 , which is subsequently hydrogenated via the reverse-water-gas-shift pathway, with CO as the key reaction intermediate. Interestingly, in situ infrared spectroscopy shows similar surface significant species during the direct hydrogenation of DFMs and during the conventional catalytic hydrogenation of molecular CO 2 , suggesting that the catalytic mechanisms during the two operating regimes are highly correlated.

Dual‐Functional NiMg2−x Ca x Al‐Hydrotalcite for Integrated CO2 Capture and In Situ Methanation

Insights into Nickel-Based Dual Function Materials for CO2 Sorption and Methanation: Effect of Reduction Temperature

Ni-CaO Dual Function Materials Prepared by Different Synthetic Modes for Integrated CO2 Capture and Conversion

A Novel NiCa-based Dual-Functional Material with High Absorption Capacity and Stability for Integrated Direct Air CO2 Capture and In-Situ Methanation

Integrated CO2 capture and methanation from the intermediate-temperature flue gas on dual functional hybrids of AMS/CaMgO||Ni Co

Metal Oxide‐Doped Ni/ CaO Dual‐Function Materials for Integrated CO 2 Capture and Conversion: Performance and Mechanism

Mechanochemical synthesis of Ni/MgO dual functional materials at room temperature for CO 2 capture and methanation

Optimizing alkali metal Salt-Induced structural assembly of Ni-MgO dual function materials for enhanced CO 2 capture and methanation performance

An Efficient Ni-Mg/HNTs Catalyst for CO2 Methanation Prepared by Sol-Gel Method Assisted with Citric Acid

Ni-based Hydrotalcite-Derived Catalysts for Enhanced CO2 Methanation: Thermal Tuning of the Metal-Support Interaction

In Situ Spectroscopic Study of CO2 Capture and Methanation over Ni-Ca Based Dual Functional Materials

An investigation of the Ni/carbonate interfaces on dual function materials in integrated CO2 capture and utilisation cycles

Mechanistic Study of Integrated CO2 Capture and Utilization over Cu and Al-modified Calcined Limestone with High Stability Using MFB-TGA-MS

Influence of reduction conditions on the structure-activity relationships of NaNO 3 -promoted Ni/MgO dual function materials for integrated CO 2 capture and methanation

Ni-based hydrotalcite-derived catalysts for enhanced CO 2 methanation: Thermal tuning of the metal-support interaction

Self‐Regenerative Ni‐Doped CaTiO3/CaO for Integrated CO2 Capture and Dry Reforming of Methane

Harnessing the structural attributes of NiMg-CUK-1 MOF for the dual-function capture and transformation of carbon dioxide into methane

Two birds with one stone: MgO promoted Ni-CaO as stable and coke-resistant bifunctional materials for integrated CO 2 capture and conversion

The Effect of Alkali Metals (Li, Na, and K) on Ni/CaO Dual-Functional Materials for Integrated CO2 Capture and Hydrogenation

Cu Promoted Ni-Ca Dual Functional Materials for Integrated CO2 Capture and Utilization in O2-containing Flue Gas: Eliminating the Delay in the Utilization Stage

Integrated CO2 capture and In-Situ methanation by efficient dual functional Li4SiO4@Ni/CeO2