Abstract:Ni-MgO dual function materials (DFMs) show promise for integrated CO2 sorption and methanation. To improve CO2 sorption capacity, Ni-MgO DFMs are promoted with alkali metal nitrates. However, the high catalyst reduction temperature will result in high energy consumption, huge temperature gap between reduction (similar to 650 degrees C) and CO2 sorption and methanation (similar to 300 degrees C), and the loss of alkali metal nitrates. In this work, we prepared a Ni/CeO2 catalyst and investigated the effect of reduction temperature on its structure-property relationships in CO2 methanation, aiming to lower the reduction temperature to an isothermal level that matches CO2 methanation. Results indicated that the reduction temperature fell from over 650 to 300 degrees C, and Ni/CeO2 reduced at 300 degrees C featured high CO2 conversion (72.7%) and CH4 selectivity (98.9%). The CO2 methanation activity of Ni/CeO2 declined significantly when the reduction temperature exceeded 400 degrees C. The formation of more oxygen vacancy defects due to the interaction between NiO and CeO2 promoted the reduction of NiO species at lower temperatures. The declined CO2 methanation activity at high reduction temperatures was ascribed to the consumption of oxygen vacancies in catalyst reduction, and less defects were available for CO2 activation and methanation. An alkali metal nitrate promoted MgO adsorbent was physically mixed with Ni/CeO2 to construct (Li-Na-K)NO3-MgO-Ni/CeO2-phy DFMs for integrated CO2 sorption and methanation. The DFMs could be facilely reduced at 300 degrees C, and this has made it possible to realize the isothermal operation of catalyst reduction and CO2 sorption and methanation in integrated CO2 capture and utilization (ICCU). The (Li-Na-K)NO3-MgO-Ni/CeO2-phy DFMs reduced at 300 degrees C exhibited an impressive CO2 uptake of 2.74 mmol CO2/g DFMs and a great CH4 yield of 1.10 mmol CH4/g DFMs, and they could be a promising alternative to Ru-based DFMs with respect to their comparable CO2 sorption capacity and methanation activity and minimized cost of raw materials.

Mechanochemical synthesis of Ni/MgO dual functional materials at room temperature for CO 2 capture and methanation

Insights into Nickel-Based Dual Function Materials for CO2 Sorption and Methanation: Effect of Reduction Temperature

Ni-CaO Dual Function Materials Prepared by Different Synthetic Modes for Integrated CO2 Capture and Conversion

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

Mechanochemical in-situ incorporation of Ni on MgO/MgH2 surface for the selective O-/C-terminal catalytic hydrogenation of CO2 to CH4

An Efficient Ni-Mg/HNTs Catalyst for CO2 Methanation Prepared by Sol-Gel Method Assisted with Citric Acid

Optimizing alkali metal Salt-Induced structural assembly of Ni-MgO dual function materials for enhanced CO 2 capture and methanation performance

Enhanced Low-Temperature Catalytic Activity for CO2 Methanation over NiMgx/Na-HNTs: the Role of MgO

A Novel NiCa-based Dual-Functional Material with High Absorption Capacity and Stability for Integrated Direct Air CO2 Capture and In-Situ Methanation

Dual‐Functional NiMg2−x Ca x Al‐Hydrotalcite for Integrated CO2 Capture and In Situ Methanation

Metal Oxide‐Doped Ni/ CaO Dual‐Function Materials for Integrated CO 2 Capture and Conversion: Performance and Mechanism

Influence of reduction conditions on the structure-activity relationships of NaNO 3 -promoted Ni/MgO dual function materials for integrated CO 2 capture and methanation

Cu Promoted Ni-Ca Dual Functional Materials for Integrated CO2 Capture and Utilization in O2-containing Flue Gas: Eliminating the Delay in the Utilization Stage

In Situ Spectroscopic Study of CO2 Capture and Methanation over Ni-Ca Based Dual Functional Materials

Nano-MgO: Novel Preparation and Application As Support of Ni Catalyst for CO2 Reforming of Methane

Recent Progress of MgO-based Materials in CO2 Adsorption and Conversion: Modification Methods, Reaction Condition, and CO2 Hydrogenation

CO2 Methanation over Ni/Mg@MCM-41 Prepared by In-Situ Synthesis Method

CO2 Reforming of Methane over a Highly Dispersed Ni/Mg-Al-O Catalyst Prepared by a Facile and Green Method

Integrated CO2 capture and In-Situ methanation by efficient dual functional Li4SiO4@Ni/CeO2

Recent progress of MgO-based materials in CO 2 adsorption and conversion: Modification methods, reaction condition, and CO 2 hydrogenation

Flower-like Hollow Ni0.5/xMgO-Al2O3 Catalysts with Excellent Stability for Dry Reforming of Methane: the Role of Mg Addition