Abstract:A femtosecond laser single-stage nonlinear amplification system composed of Yb-doped large-mode-area singlepolarization photonic crystal fibers is demonstrated. Effects of net cavity dispersion and pump power on oscillator output parameters and the evolution dynamics of the amplified pulse after compression are discussed for different seed pulse parameters. Under the experimental conditions in this paper, the longer and less chirped pulses are obtained with a larger negative net intracavity dispersion in the oscillator. When a nearly-transform-limited pulse is chosen as seed pulse nder the condition of oscillator pump power of 4.53 W, the shortest nearly-pedestal-free amplified pulse is achieved under the amplifier pump power of 60 W after the dispersion is compensated by a grating pair, in which the pulse duration is 45.7 fs with an average power of 28 W at a repetition frequency of 42 MHz. When the oscillator pump power is increased to 5.08 W and most nearly-transform-limited pulses under the pump condition are selected as the seed pulses, the maximum average power of 34.5 W with a duration of 53.5 fs is obtained at an amplifier pump power of 70 W.

Practical 24-Fs, 1-Μj, 1-Mhz Yb-fiber Laser Amplification System.

All Polarization-Maintaining Fiber Amplification System to Generate High-Power and High-Quality Femtosecond Laser Pulses

Hundred Nano-Joules Polarization-Maintaining Yb-Doped Fiber Femtosecond Laser Amplification System

1.3 Μj Ultrashort Pulse Generation with Gain-Managed Nonlinear Yb‑doped Fiber Amplifier

High-power femtosecond pulses fiber laser system

High-Power Femtosecond Self-Similar Fiber Amplification System

Coupling dynamics for a photonic crystal fiber femtosecond laser nonlinear amplification system

Er-doped all fib er lasers based on chirped-pulse amplification

Sub-100 Fs High Power Yb-Doped Single Polarization Large-Mode-Area Photonic Crystal Fiber Laser Amplifier

High-repetition-rate, 50-Μj-level, 1064-Nm, CPA Laser System Based on a Single-Stage Double-Pass Yb-doped Rod-Type Fiber Amplifier

Sub-60-fs, Compact 1100-Nm Fiber Laser System Based on Double-Pass Pre-Chirp Managed Amplification.

Femtosecond Yb-doped Tapered Fiber Pulse Amplifiers with Peak Power of over Hundred Megawatts

Femtosecond Fiber Amplification System Based On Third-Order Dispersion Compensation Technique

112-Μj 180-Fs Pulses at 1-Khz Repetition Rate from Yb-Doped Laser Based on Strictly All-Fiber CPA Structure

72-Kw High-Peak-power Linearly-Polarized Single-Mode Pulsed Fiber Laser with 80 Khz Repetition Rate and 4.5 Ns Duration

Pre-chirping management of a self-similar Yb-fiber amplifier towards 80 W average power with sub-40 fs pulse generation.

High-pulse-quality Yb-fiber Amplifier Generation of 10 Μj, 250 Fs Pulses at 500 Khz Repetition Rate

Nonlinear chirped pulse amplification for a 100-W-class GHz femtosecond all-fiber laser system at 1.5 m

All-fiber High Energy and Peak Power Broadband Yb-doped Fiber Amplifier

A Sub-Nanosecond Narrow-Linewidth Pulsed Laser Source with Controllable Repetition Rate

A Wide Spectrum Yb-Doped All-Fiber-Integrated Chirped Pulse Amplification System Based on Parabolic Shaping