Abstract:A main oscillation fiber amplification(MOFA)system is proposed, and the increasing of pulse signal peak power and the broadening of repetition frequency modulation range of the proposed system are studied experimentally. The electrical pulse modulation and the acousto-optic modulation are employed to modulate optical pulse sequence. Amplified spontaneous emission effect and self-excited oscillation of semiconductor seed source, which are generated in the process of small signal amplifying, are suppressed. The limitation of seed source to the repetition frequency of the proposed system is eliminated, and the repetition frequency can be tuned continuously in the range of 1～200kHz. In the process of optical pulse modulation with the acousto-optic modulator, the acoustooptic Q-switch can effectively suppress the spectral broadening caused by self-phase modulation. The rod-like photonic crystal fiber with large mode field is used as the gain medium to increase the peak power of optical pulse and the beam quality of output light, and the nonlinear effect caused by high peak power is suppressed. Ultimately, the stable optical pulse output with the pulse width of 1. 12ns and the peak power of 2. 01MW is achieved, the average power is more than 56W, and the beam quality of the output light is close to the diffraction limit (M2x=1. 49, M2 y=1. 54).

All Polarization-Maintaining Fiber Amplification System to Generate High-Power and High-Quality Femtosecond Laser Pulses

Vector-dispersion Compensation and Pulse Pedestal Cancellation in a Femtosecond Nonlinear Amplification Fiber Laser System.

Hundred Nano-Joules Polarization-Maintaining Yb-Doped Fiber Femtosecond Laser Amplification System

High-Power Femtosecond Self-Similar Fiber Amplification System

High-power All-Fiber Linearly Polarized Yb-doped Chirped Pulse Amplifier Based on Active Polarization Control

Femtosecond Yb-doped Tapered Fiber Pulse Amplifiers with Peak Power of over Hundred Megawatts

High-power Femtosecond Laser Generation from an All-Fiber Linearly Polarized Chirped Pulse Amplifier

414 W Near-Diffraction-limited All-Fiberized Single-Frequency Polarization-Maintained Fiber Amplifier.

Multi-Modulation Yb3+ Doped Megawatt Fiber Laser System

4.6 Kw Linearly Polarized and Narrow-Linewidth Monolithic Fiber Amplifier Based on a Fiber Oscillator Laser Seed.

Er-doped all fib er lasers based on chirped-pulse amplification

3.2-Kw 9.7-Ghz Polarization-maintaining Narrow-linewidth All-fiber Amplifier

High-power femtosecond pulses fiber laser system

A 3 Kw High Brightness Narrow Linewidth Linearly-Polarized All-Fiber Amplifier Using Homemade 20/400 Μm Panda Yb-Doped Polarization-Maintaining Fiber

325 kW all-fiberized and polarization-maintained Yb-doped amplifier with a 20 GHz linewidth and near-diffraction-limited beam quality

High-Average-Power Polarization Maintaining All-Fiber-Integrated Nonlinear Chirped Pulse Amplification System Delivering Sub-400 Fs Pulses

Development of a Femtosecond High-Power Ytterbium-doped Fiber Laser System and Study on Spiky Spectral Modulation in Highly Nonlinear Chirped-Pulse Fiber Amplifiers

A Wide Spectrum Yb-Doped All-Fiber-Integrated Chirped Pulse Amplification System Based on Parabolic Shaping

Linearly-polarized single-transverse-mode high-energy multi-ten nanosecond fiber amplifier with 50W average power.

3.25 Kw All-Fiberized And Polarization-Maintained Yb-Doped Amplifier With A 20 Ghz Linewidth And Near-Diffraction-Limited Beam Quality

>1 kW all-fiberized narrow-linewidth polarization-maintained fiber amplifiers with wavelength spanning from 1065 to 1090 nm.