Abstract:By focusing on a typical emitting wavelength of 1120 nm as an example, we present the first, to the best of our knowledge, demonstration of a high-efficiency, narrow-linewidth kilowatt-level all-fiber amplifier based on hybrid ytterbium-Raman (Yb-Raman) gains. Notably, two temporally stable, phase-modulated single-frequency lasers operating at 1064 nm and 1120 nm, respectively, were applied in the fiber amplifier, to simultaneously alleviate the spectral broadening of the 1120 nm signal laser and suppress the stimulated Brillouin scattering effect. An over 1 kW narrow-linewidth 1120 nm signal laser was obtained with slope efficiency of ${\sim}{77}\% $∼77% and beam quality of ${\rm M}_x^2\sim {1.25}$Mx2∼1.25, ${\rm M}_y^2 \sim {1.17}$My2∼1.17. The amplified spontaneous emission (ASE) noise in the fiber amplifier was effectively suppressed by incorporating an ASE-filtering system between the seed laser and the main amplifier. Furthermore, the experimental results demonstrate that the spectral linewidth broadening effect is tightly related to the injected power ratios between the two seed lasers. Overall, this setup could provide a reference on obtaining and optimizing high-power narrow-linewidth fiber lasers operating in the long wavelength extreme of the Yb gain spectrum.

>1 kW all-fiberized narrow-linewidth polarization-maintained fiber amplifiers with wavelength spanning from 1065 to 1090 nm.

3.2-Kw 9.7-Ghz Polarization-maintaining Narrow-linewidth All-fiber Amplifier

325 kW all-fiberized and polarization-maintained Yb-doped amplifier with a 20 GHz linewidth and near-diffraction-limited beam quality

3.25 Kw All-Fiberized And Polarization-Maintained Yb-Doped Amplifier With A 20 Ghz Linewidth And Near-Diffraction-Limited Beam Quality

1.89 kW all-fiberized and polarization-maintained amplifiers with narrow linewidth and near-diffraction-limited beam quality.

414 W Near-Diffraction-limited All-Fiberized Single-Frequency Polarization-Maintained Fiber Amplifier.

189 Kw All-Fiberized and Polarization-Maintained Amplifiers with Narrow Linewidth and Near-Diffraction-limited Beam Quality

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

250 W Continuous-tunable All-Fiberized Single-frequency Polarization-Maintained Amplifiers with Wavelength Spanning from 1065 Nm to 1090 Nm

Kilowatt-level, Mode-Instability-free, All-Fiber and Polarization-Maintained Amplifier with Spectral Linewidth of 1.8 GHz

Kilowatt-level Yb-Raman fiber amplifier with narrow-linewidth and near-diffraction-limited beam quality

Kilowatt-level ytterbium-Raman fiber amplifier with a narrow-linewidth and near-diffraction-limited beam quality

560 W All Fiber and Polarization-Maintaining Amplifier with Narrow Linewidth and Near-Diffraction-limited Beam Quality.

A 3 Kw High Brightness Narrow Linewidth Linearly-Polarized All-Fiber Amplifier Using Homemade 20/400 Μm Panda Yb-Doped Polarization-Maintaining Fiber

A 3.2 Kw Single Stage Narrow Linewidth Fiber Amplifier Emitting at 1050 Nm

Linearly Polarized Fiber Amplifier with Narrow Linewidth of 5 Kw Exhibiting a Record Output Power and Near-Diffraction-limited Beam Quality.

4.6 Kw Linearly Polarized and Narrow-Linewidth Monolithic Fiber Amplifier Based on a Fiber Oscillator Laser Seed.

Kilowatt-level, High Brightness, Narrow-Linewidth PM Fiber Amplifiers Based on Laser Gain Competition

694 W sub-GHz polarization-maintained tapered fiber amplifier based on spectral and pump wavelength optimization

Kilowatt-Level, Narrow Linewidth, Polarization-Maintained All-Fiber Amplifiers Based on Multi-Phase Coded Signal Modulation and Laser Gain Competition

1.4kw All-Fiber Narrow-Linewidth Polarization-Maintained Fiber Amplifier