Abstract:A unique type of refractive index (RI) sensor is proposed using a dual Mach-Zehnder interferometer (MZI) structure based on side-hole fibers (SHFs). The MZI structure contains two single-mode fibers (SMFs), two coreless fiber (CLF) sections and an SHF section, which are spliced together in the order of SMF-CLF-SHF-CLF-SMF. The SMFs and the CLFs enable light lead in/out and beam splitting/combining, respectively. As a special feature of the structure, one hole of SHF is exposed for liquid filling and to form two MZIs as well. Three types of sensors are fabricated, namely S1, S2 and S3. Numerical simulation and experimental studies have been conducted to characterize the sensing performance. The RI sensitivity of the S1 using the similar to 550 mu m long SHF section reaches 14,000 nm/RIU. When a shorter SHF section is used in S2, the detectable RI range is broadened due to larger FSR. When the closed hole of SHF in S3 is filled with liquid to introduce the Vernier effect, the sensitivity can be further enhanced to over 44,000 nm/RIU (i.e., Refractive Index Unit), which corresponds to the detection limit at the level of 1.0 x 10(-5) RIU. This sensor design is original and easy to package, which gives it potential for label-free biochemical analyses.

High-Quality Mach-Zehnder Interferometer Based on A Microcavity in Single-Multi-Single Mode Fiber Structure for Refractive Index Sensing

Microcavity Mach–Zehnder Interferometer Sensors for Refractive Index Sensing

Ultrasensitive Liquid Refractometer Based on a Mach-Zehnder Micro-Cavity in Optical Fibre Fabricated by Femtosecond Laser-Induced Water Breakdown

Thinned Fiber Based Mach-Zehnder Interferometer for Measurements of Liquid Level and Refractive Index

In-fiber Mach-Zehnder Interferometer with Piecewise Interference Spectrum Based on Hole-Assisted Dual-Core Fiber for Refractive Index Sensing.

Highly Sensitive Refractive Index Fiber Inline Mach–Zehnder Interferometer Fabricated by Femtosecond Laser Micromachining and Chemical Etching

Photonic Crystal Fiber Based M-Z Interferometer for Refractive Index Measurement

Dual Mach–Zehnder Interferometer Based on Side-Hole Fiber for High-Sensitivity Refractive Index Sensing

A Mach-Zehnder interferometer based on tapered dual side hole fiber for refractive index sensing

All-fiber Mach–Zehnder Interferometer with Dual-Waist PCF Structure for Highly Sensitive Refractive Index Sensing

High Sensitivity Refractive Index Sensing of Mach–Zehnder Interferometer Based on Multimode Fiber Core Sandwiched Between Two Waist-Enlarged Fiber Tapers

Miniature fiber-optic near-surface gap-coupled cladding waveguide Mach-Zehnder interferometric refractive index sensor inscribed by femtosecond laser

Mach-Zehnder interferometer refractive index sensing probe based on dual microfiber coupler

High-Sensitive Fiber-Optic Refractometer Based on a Core-Diameter-Mismatch Mach–Zehnder Interferometer

3D Printing Optofluidic Mach-Zehnder Interferometer on a Fiber Tip for Refractive Index Sensing

All-fiber Mach-Zehnder Interferometers for Sensing Applications.

In-fiber Mach–Zehnder Interferometer Formed by Large Lateral Offset Fusion Splicing for Gases Refractive Index Measurement with High Sensitivity

A Robust High Refractive Index Sensitivity Fiber Mach–Zehnder Interferometer Fabricated by Femtosecond Laser Machining and Chemical Etching

Fiber Mach–Zehnder Interferometers Fabricated by Nanosecond Pulses and Applications in Refractive Index Sensing

Dumbbell-Shaped Mach–Zehnder Interferometer with High Sensitivity of Refractive Index

Fiber Mach-Zehnder Interferometer Based on Concatenated Down- and Up-Tapers for Refractive Index Sensing Applications