Abstract:A unique type of refractive index (RI) sensor is proposed using a dual Mach-Zehnder interferometer (MZI) structure based on side-hole fibers (SHFs). The MZI structure contains two single-mode fibers (SMFs), two coreless fiber (CLF) sections and an SHF section, which are spliced together in the order of SMF-CLF-SHF-CLF-SMF. The SMFs and the CLFs enable light lead in/out and beam splitting/combining, respectively. As a special feature of the structure, one hole of SHF is exposed for liquid filling and to form two MZIs as well. Three types of sensors are fabricated, namely S1, S2 and S3. Numerical simulation and experimental studies have been conducted to characterize the sensing performance. The RI sensitivity of the S1 using the similar to 550 mu m long SHF section reaches 14,000 nm/RIU. When a shorter SHF section is used in S2, the detectable RI range is broadened due to larger FSR. When the closed hole of SHF in S3 is filled with liquid to introduce the Vernier effect, the sensitivity can be further enhanced to over 44,000 nm/RIU (i.e., Refractive Index Unit), which corresponds to the detection limit at the level of 1.0 x 10(-5) RIU. This sensor design is original and easy to package, which gives it potential for label-free biochemical analyses.

In-fiber Mach–Zehnder Interferometer Formed by Large Lateral Offset Fusion Splicing for Gases Refractive Index Measurement with High Sensitivity

Highly Sensitive Refractive Index Sensor Based on an In-Fiber Droplet-Shape Air-Cavity

Highly Sensitive Refractive Index Fiber Inline Mach–Zehnder Interferometer Fabricated by Femtosecond Laser Micromachining and Chemical Etching

High Sensitivity Gas Refractometer Based on All-Fiber Open-Cavity Fabry–Perot Interferometer Formed by Large Lateral Offset Splicing

A Robust High Refractive Index Sensitivity Fiber Mach–Zehnder Interferometer Fabricated by Femtosecond Laser Machining and Chemical Etching

High-Quality Mach-Zehnder Interferometer Based on A Microcavity in Single-Multi-Single Mode Fiber Structure for Refractive Index Sensing

Tapered Fiber-Optic Mach-Zehnder Interferometer for Ultra-High Sensitivity Measurement of Refractive Index

A New Mach-Zehnder Interferometer in a Thinned-Cladding Fiber Fabricated by Electric Arc for High Sensitivity Refractive Index Sensing

Dual Mach–Zehnder Interferometer Based on Side-Hole Fiber for High-Sensitivity Refractive Index Sensing

High sensitivity of taper-based Mach-Zehnder interferometer embedded in a thinned optical fiber for refractive index sensing.

Microcavity Mach–Zehnder Interferometer Sensors for Refractive Index Sensing

Highly Sensitive Refractive Index Sensor Based on Novel Mach–Zehnder Interferometer with Multimode Fiber–thin Core Fiber–multimode Fiber Structure

Refractive index sensor with asymmetrical fiber Mach-Zehnder interferometer based on concatenating single-mode abrupt taper and core-offset section

Photonic Crystal Fiber Based M-Z Interferometer for Refractive Index Measurement

Fiber Mach-Zehnder Interferometer Based on Concatenated Down- and Up-Tapers for Refractive Index Sensing Applications

Ultra-Abrupt Tapered Fiber Mach-Zehnder Interferometer Sensors

Fiber Inline Interferometric Refractive Index Sensors Fabricated by Femtosecond Laser and Fusion Splicing

Thinned Fiber Based Mach-Zehnder Interferometer for Measurements of Liquid Level and Refractive Index

Miniature fiber-optic near-surface gap-coupled cladding waveguide Mach-Zehnder interferometric refractive index sensor inscribed by femtosecond laser

Fiber Mach–Zehnder Interferometers Fabricated by Nanosecond Pulses and Applications in Refractive Index Sensing

All-fiber Mach-Zehnder Interferometers for Sensing Applications.