Abstract:A Mach-Zehnder interferometer (MZI) composed by a pair of long period gratings (LPGs) fabricated in silica microfiber for sensing applications is demonstrated. Each LPG is fabricated with a pulsed CO2 laser by creating six periodical deformations along fiber length with only one scanning cycle. The length of the MZI can reach as short as 8.84 mm when the diameter of the microfiber is 9.5 μm. Compared with the ones fabricated in single-mode fibers, the present MZI is much shorter owing to the large effective-index difference between the fundamental and higher order modes. The microfiber MZI exhibits a sensitivity to surrounding refractive index (RI) of 2225 nm per refractive index unit and the temperature sensitivity of only 11.7 pm/°C. Theoretical analysis suggests that the performances of the MZI sensor can be improved by using thinner microfibers with a diameter down to 3.5 μm: The sensitivity can be greatly enhanced due to the stronger evanescent-field interaction and reduced dispersion factor; the transmission dips become narrower which benefits high-resolution measurement; the thinner fiber also allows further reduction in device length. The present device has great potential in biochemical and medical sensing due to the advantages including easy fabrication, excellent compactness and high sensitivity.

Fiber Mach–Zehnder Interferometers Fabricated by Nanosecond Pulses and Applications in Refractive Index Sensing

Mach-Zehnder Interferometers Assembled with Optical Microfibers or Nanofibers

Highly Sensitive Refractive Index Fiber Inline Mach–Zehnder Interferometer Fabricated by Femtosecond Laser Micromachining and Chemical Etching

Microcavity Mach–Zehnder Interferometer Sensors for Refractive Index Sensing

High-Quality Mach-Zehnder Interferometer Based on A Microcavity in Single-Multi-Single Mode Fiber Structure for Refractive Index Sensing

A Robust High Refractive Index Sensitivity Fiber Mach–Zehnder Interferometer Fabricated by Femtosecond Laser Machining and Chemical Etching

Femtosecond laser-inscribed fiber interface Mach–Zehnder interferometer for temperature-insensitive refractive index measurement

Miniature fiber-optic near-surface gap-coupled cladding waveguide Mach-Zehnder interferometric refractive index sensor inscribed by femtosecond laser

In-fiber Mach–Zehnder Interferometer Formed by Large Lateral Offset Fusion Splicing for Gases Refractive Index Measurement with High Sensitivity

Highly Improved Refractive Index Sensitivity in Fiber Mach-Zehnder Interferometer Based on Two Tapers

Microfiber Mach-Zehnder interferometer based on long period grating for sensing applications

Photonic Crystal Fiber Based M-Z Interferometer for Refractive Index Measurement

An Open-Cavity Fiber Fabry-Perot Interferometer Fabricated by Femtosecond Laser Micromachining for Refractive Index Sensing

All-fiber Mach-Zehnder Interferometers for Sensing Applications.

A High Sensitivity Refractive Index Sensor Based on Photonic Crystal Fibre Mach–Zehnder Interferometer

A High-Quality Mach-Zehnder Interferometer Fiber Sensor by Femtosecond Laser One-Step Processing

Improved optical fiber Mach-Zehnder high-sensitivity refractive index sensor

Review of optical fiber Mach–Zehnder interferometers with micro-cavity fabricated by femtosecond laser and sensing applications

Femtosecond laser fabricated all-optical fiber sensors with ultrahigh refractive index sensitivity: modeling and experiment

High sensitivity of taper-based Mach-Zehnder interferometer embedded in a thinned optical fiber for refractive index sensing.

In-Fiber M-Z Interferometer Based on Cascaded Long Period Gratings in Embedded-Core Fiber