Abstract:An ultra-high sensitivity refractive index (RI) sensor, based on an in-line fiber Mach-Zehnder interferometer (MZI) and utilizing a special 40 mu m fiber which has been specifically designed for the purpose, supporting only the LP01 and LP11 modes propagating in the fiber, has been proposed and numerically demonstrated in this work. The all-fiber MZI, based on LP01 and LP11 mode interference, was fabricated by utilizing a special design with two gradually tapered joints at both sides of this multi-clad thin diameter fiber (TDF). When the TDF diameters varied from 40 mu m to 5 mu m, a sudden change in the direction of the wavelength shift in the transmission spectrum of the TDF-MZI devices was observed both in liquid RI and air relative humidity (RH) monitoring experiments, as the surrounding RI or RH was seen to increase monotonically. Ultra-high sensitivity values of 5942.8nm/RIU (1.335-1.342) and 21292.2nm/RIU (1.4000-1.4025) were obtained in the experiments carried out, through the use of a tapered TDF-MZI device with TDF diameters of similar to 5 mu m and similar to 9 mu m, respectively. The maximum RH sensitivity of 1.084nm/%RH was obtained by the use of the TDF-MZI device with a TDF diameter of similar to 12 mu m. A compact all-fiber TDF-MZI sensor was thus created with an overall sensing length of <4mm, showing the advantages of high sensitivity, low loss, and flexibility in the tunable monitoring direction of the wavelength shift. This design is well suited to various applications, where the high sensitivity RI and RH measurements are required at precise locations.

3D Printing Optofluidic Mach-Zehnder Interferometer on a Fiber Tip for Refractive Index Sensing

Thinned Fiber Based Mach-Zehnder Interferometer for Measurements of Liquid Level and Refractive Index

High-Quality Mach-Zehnder Interferometer Based on A Microcavity in Single-Multi-Single Mode Fiber Structure for Refractive Index Sensing

Dual Mach–Zehnder Interferometer Based on Side-Hole Fiber for High-Sensitivity Refractive Index Sensing

High-Sensitive Fiber-Optic Refractometer Based on a Core-Diameter-Mismatch Mach–Zehnder Interferometer

Strip-loaded Mach–Zehnder interferometer for absolute refractive index sensing

Microcavity Mach–Zehnder Interferometer Sensors for Refractive Index Sensing

Fiber Mach-Zehnder Interferometer Based on Concatenated Down- and Up-Tapers for Refractive Index Sensing Applications

Photonic Crystal Fiber Based M-Z Interferometer for Refractive Index Measurement

In-fiber Mach-Zehnder Interferometer with Piecewise Interference Spectrum Based on Hole-Assisted Dual-Core Fiber for Refractive Index Sensing.

High-sensitive fiber-optic refractometer constructed by core-diameter-mismatch welding

All-fiber Mach-Zehnder Interferometers for Sensing Applications.

Dumbbell-Shaped Mach–Zehnder Interferometer with High Sensitivity of Refractive Index

Highly Sensitive Refractive Index Fiber Inline Mach–Zehnder Interferometer Fabricated by Femtosecond Laser Micromachining and Chemical Etching

Refractometer Based on Fiber Mach-Zehnder Interferometer Composed of Two Micro Bending Cores

All-fiber Mach–Zehnder Interferometer with Dual-Waist PCF Structure for Highly Sensitive Refractive Index Sensing

High sensitivity of taper-based Mach-Zehnder interferometer embedded in a thinned optical fiber for refractive index sensing.

Ultrasensitive Refractive Index Sensor Based on Mach–Zehnder Interferometer and a 40μm Fiber

In-fiber Mach–Zehnder Interferometer Formed by Large Lateral Offset Fusion Splicing for Gases Refractive Index Measurement with High Sensitivity

A Mach-Zehnder interferometer based on tapered dual side hole fiber for refractive index sensing

TCF-MMF-TCF fiber structure based interferometer for refractive index sensing