Abstract:The paper proposed and studied a Mach-Zehnder mode interferometric refractive index sensor, which is based on splicing points tapered SMF-PCF-SMF (SMF, single-mode fiber; PCF, photonic crystal fiber) structure. For the reason that the effective refractive index of photonic crystal fiber cladding high-order modes near fiber core are more sensitive to surrounding refractive index changes, the refractive index measurement sensitivity of splicing points tapered SMF-PCF-SMF Mach-Zehnder mode interferometer can be enhanced further through tapering the splicing points. Relations between refractive index measurement sensitivity and photonic crystal fiber length and taper waist diameter are studied through numerical simulations and experiments. Simulation and experimental results show that sensitivity will be increased with the increase of photonic crystal fiber length and the decrease of taper waist diameter. In the refractive range of 1.3333-1.3737, splicing points tapered SMF-PCF-SMF Mach-Zehnder mode interferometer with PCF length of 4 cm and taper waist diameter of 60.4 mu m has refractive index measurement sensitivity of 260.8 nm/RIU, compared with sensitivity of 224.2 nm/RIU of direct splicing SMF-PCF-SMF Mach-Zehnder mode interferometer with PCF length of 4 cm, the sensitivity increased by 16.3%. The research shows that the sensing structure is with good linearity and repeatability. (C) 2015 Elsevier B.V. All rights reserved.

A Mach-Zehnder interferometer based on tapered dual side hole fiber for refractive index sensing

High-Quality Mach-Zehnder Interferometer Based on A Microcavity in Single-Multi-Single Mode Fiber Structure for Refractive Index Sensing

Dual Mach–Zehnder Interferometer Based on Side-Hole Fiber for High-Sensitivity Refractive Index Sensing

High sensitivity of taper-based Mach-Zehnder interferometer embedded in a thinned optical fiber for refractive index sensing.

Single S-Tapered Fiber Mach-Zehnder Interferometers

Mach-Zehnder interferometer refractive index sensing probe based on dual microfiber coupler

Photonic Crystal Fiber Based M-Z Interferometer for Refractive Index Measurement

Spectrum Online-Tunable Mach–Zehnder Interferometer Based on Step-Like Tapers and Its Refractive Index Sensing Characteristics

Sensitivity-enhanced Refractive Index Sensor by Using Tapered Thin-Core Fiber Based Inline Mach-Zehnder Interferometer

A New Mach-Zehnder Interferometer in a Thinned-Cladding Fiber Fabricated by Electric Arc for High Sensitivity Refractive Index Sensing

Microcavity Mach–Zehnder Interferometer Sensors for Refractive Index Sensing

High Sensitivity Refractive Index Sensor Based on Splicing Points Tapered Smf-Pcf-Smf Structure Mach-Zehnder Mode Interferometer

Thinned Fiber Based Mach-Zehnder Interferometer for Measurements of Liquid Level and Refractive Index

Refractive Index Sensor Based on Asymmetrical Mach-Zehnder Interferometer with Step-Like Tapers

Research on High Sensitive Refractive Index Sensor Based on D-Single Mode Fiber

Sensitivity Enhanced Refractive Index Sensor With In-Line Fiber Mach-Zehnder Interferometer Based on Double-Peanut and Er-Doped Fiber Taper Structure

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

An In-Fiber Mach-Zehnder Interferometer Based on Dual Side-Hole Fiber for Highly Sensitive Measurement of Curvature

Fiber Mach-Zehnder Interferometer Based on Concatenated Down- and Up-Tapers for Refractive Index Sensing Applications

High sensitivity MachZehnder interferometer sensors based on concatenated ultra-abrupt tapers on thinned fibers

Refractive Index Sensing Based on Mach-Zehnder Interferometer Formed by Three Cascaded Single-Mode Fiber Tapers