Abstract:Hall-effect thrusters (HET) are a stationary form of electric propulsion that have been widely used in space missions. However, the wide range of the divergence angle of the HET plasma plume and the high ion velocities can result in a large area where collisions and plume interactions occur. Of these, low-energy charge-exchange (CEX) ions typically originate from collisions, and can result in severe deposition and sputtering issues on spacecraft components. In this work, we propose a novel magnetic Faraday probe in coordination with a particle-in-cell (PIC) simulation code. This system is able to deflect CEX ions with a changing solenoid current, and can be used to obtain the ion density and energy levels of CEX ions through experimental measurements. In addition, a Faraday probe, a retarding potential analyzer (RPA), and a Langmuir probe were used to obtain the beam characteristics. The CEX ion density at the beam edge area was determined to be in the level of 2.54 × 1012 m−3 (the local ion density of the plasma plume is in the level of 1013 m−3), and the ion energy level at the beam edge area was found to be below 30.1 eV. Due to the difference in the vacuum levels between ground tests and in-space operation, CEX collisions will be more severe during ground tests, and can affect plume measurements and erosion of the thruster. Two different vacuum levels were tested experimentally here to study the relationship between CEX ions and the background neutrals. As a result, it was found that a high background neutral density can exacerbate CEX collisions at the beam edge area, which results in an increase in the CEX ion density and a decrease in the CEX ion energy. This study brings us new information on the CEX ion density and energy distribution at the beam edge area from an experimental point of view. Furthermore, data on CEX ions energy can be used as input data for future plume simulations.

Calibrating Ion Density Profile Measurements in Ion Thruster Beam Plasma

Single Langmuir Probe Dignostics for Characteristic Parameters of the Beam Plasma in Xe Ion Thruster

Electrostatic Probe Diagnosis on the Plasma in the Discharge Chamber of an Electron Cyclotron Resonance Ion Thruster

Electron temperature measurement in Maxwellian non-isothermal beam plasma of an ion thruster.

Plume Plasma Measurements of a 20cm Xenon Ion Thruster Using a Multiple-Probe Array IEPC-2015-222 / ISTS-2015-b-222

Microwave Plasma Thruster Plume Diagnosis Using Microwave Interference Method

2d Electron Density Profile Measurement In Tokamak By Laser-Accelerated Ion-Beam Probe

Density profile measurement with a heavy ion beam probe in a toroidal plasma of the compact helical system

Thrust measurement of an ion thruster by a force probe approach and comparison to a thrust balance

Electron density measurement of an ionospheric-like plasma using an impedance probe

Measurement of the distribution of charge exchange ions in a Hall-effect thruster plume

Ion beam diagnostic for the assessment of miniaturized electric propulsion systems

High-spatial-resolution Image Reconstruction-Based Method for Measuring Electron Temperature and Density of the Very Near Field of an Applied-Field Magnetoplasmadynamic Thruster

Improved analysis techniques for cylindrical and spherical double probes

Development of a high dynamic range retarding potential analyzer for electric propulsion plume diagnosis

Measurement of the Electron Density of a Wind-Tunnel Plasma Using a Double Flush-Mounted Probe

Comparative Measurement of Plasma Potential with Tube Probe and Langmuir Probe

Application of Ion Probe in a Magnetized Discharge Plasma

A Retarding Potential Analyzer Design For Kev-Level Ion Thruster Beams

Ion Current Collection by Double Flush-Mounted Probe in Intermediate-Pressure Plasmas

High-resolution Particle Density Measurement for Argon Plasma Plume by Image Reconstruction and Collisional-Radiative Model