Plume Plasma Measurements of a 20cm Xenon Ion Thruster Using a Multiple-Probe Array IEPC-2015-222 / ISTS-2015-b-222

Zun Zhang,Hai-bin Tang,Jue Wang,Min Wang,Z. Wen

2015-01-01

Abstract:A multiple-probe array was designed and implemented on a laboratory model 20-cm ion thruster in order to examine the plasma plume properties thoroughly, which could be vital to fully understand the plume plasma interactions with spacecrafts and validate the ongoing modeling efforts. The probe array includes a retarding potential analyzer (RPA), a Faraday probe, an Emissive probe, a flat single Langmuir probe and a triple Langmuir probe. RPA test results show that the ion energy within the beam plasma is about 1000 eV and remains nearly constant along the increased axial distances, whereas the ion energy decreases by 7% from the centerline to 200 mm off centerline at an axial position of 500 mm. In addition, Faraday probe measurements provide a 2-D current density contour map, which shows that the maximum current density occurs at the centerline near the thruster, whereas the minimum current density occurs at the wings. The current density decreases with both increased radial and axial distances and larger current density gradient is along the radial direction. Moreover, the plasma potential determined from the emissive probe by a cross point technique is 18 V, and the electron temperature and density derived from both the triple and single Langmuir probe lies in the range of 1-4 eV, 0.4-2×10 m, respectively.