Abstract:Low-voltage scanning electron microscopy (LV-SEM) with landing energies below 5 keV has been widely used due to its advantages in mitigating the damage and charging effects to a specimen and enhancing surface information due to small interaction volume of electrons inside a specimen. Additionally, for elemental analysis of the surfaces of bulk specimens with Auger electron spectroscopy (AES) or electron energy loss spectroscopy (EELS), ultra-high-vacuum (UHV) environment is essential to maintain clean surfaces without the absorption of gas molecules during the electron beam irradiation for the acquisition of spectral data. In this study, we propose the optimal design and condition of a conical Electrostatic Objective Lens (EOL) for a UHV LV-SEM to achieve the high spatial resolution and secondary electron (SE) detection efficiency. The EOL is composed of only the three electrodes (retarding, focusing and booster electrodes) and the insulators, which is suitable for maintaining a UHV environment with less out-gassing. The cone angle of the EOL is determined as 60° to integrate a spectrometer in the UHV LV-SEM and in a large size and a higher tilt angle of the sample. Through the optimization with the simulations, the EOL achieves the minimized spherical and chromatic aberration coefficients of 0.05 and 0.03 mm at the sample side, respectively, at the landing energy of 50 eV and the shortest working distance (WD) of 1 mm for high-resolution imaging. In addition, the probe diameter of the optimized EOL is 2.3 nm at 1 keV and 5.7 nm at 50 eV with a WD of 1 mm and a probe current of 10 pA, which are comparable to previously studied compound objective lenses with magnetic and electrostatic lenses. Using a longer WD of 4 mm for analysis, the probe diameter was 5.4 nm at 1 keV and the SE detection efficiency was 83.3 % owing to the separated scintillator detector structure from the booster electrode. These results imply that the optimized EOL has the potential to be applied to a high-performance UHV LV-SEM for the surface imaging and analysis with a simple system configuration.

Design of anamorphic magnification high-numerical aperture objective for extreme ultraviolet lithography by curvatures combination method.

Design of Large Field of View and High Numerical Aperture Microscope Objective

Design of objective lens with reflective spherical Fresnel zone plate

Annular Oblique Epi-Illumination Design for Ultra-Large-scale and High-Resolution Fluorescence Microscopy

Design of Athermalized Wide-Angle Low-Distortion Lens Using Freeform Surface

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Design and testing of optical inspection lens with large-field and high resolution

Optimization of Longitudinal Alignment of an 4<i>f</i> System in a Compact Vectorial Optical-Field Generator Based on a High-Resolution Liquid Crystal Spatial Light Modulator

High-performance compact athermal panoramic annular lens design with separated radial optical power

The method of solving initial structure by Seidel aberration theory for extreme ultraviolet lithography objective

Research on the Large Field Projection Lithograph Lens

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Design of tilted and decentered anamorphic optical system based on nodal aberration control

Compact Ultraviolet Light-Emitting Diode-Based Lithography Illumination System with Tunable Coherent Factor

The design of bi-aspherical single objective lens with numerical aperture of 0.85

Tatian polynomial-based annular pupil wavefront optimization method for high-NA extreme ultraviolet lithography

Freeform Lens Arrays For Off-Axis Illumination In An Optical Lithography System

Doublet liquid variable-focus lens for spherical aberration correction

Design Method of Surface Contour for A Freeform Lens with Wide Linear Field-Of-View

Freeform lens for off-axis illumination in optical lithography system

Design and optimization of a conical electrostatic objective lens of a low-voltage scanning electron microscope for surface imaging and analysis in ultra-high-vacuum environment