Abstract:P2-type layered oxides with low Na + diffusion barriers have emerged as promising cathode materials for sodium-ion batteries (SIBs) due to excellent cycle stability and rate performance. Among them, Co/Ni-free Fe-Mn-Cu based cathode materials have gained significant attention owing to their abundance, low cost, and environmentally friendless. However, their practical application has been hindered by irreversible phase changes during the charging/discharging process, leading to rapid capacity decay. To address this issue, the inactive element (Titanium) is introduced in Na 0.70 Fe 0.20 Cu 0.20 Mn 0.60 O 2 oxides to mitigate the detrimental phase transitions and enhance electrochemical performance by facilitating anionic redox reactions. The resulting Na 0.70 Fe 0.20 Cu 0.20 Mn 0.55 Ti 0.05 O 2 (NFCMT-0.05) cathode material exhibits a high initial discharge specific capacity of 186 mAh/g at 0.1C and superior cycling stability, with a capacity retention of 83.5% after 400 cycles at 5C between 2.0 and 4.3 V. Furthermore, the NFCMT-0.05 maintains P2 phase structure throughout the entire sodiation/desodiation process, and the reversible oxygen-related redox reaction provides additional discharge capacity for the Fe-Mn-based cathode above 4.1 V. The NFCMT-0.05 also demonstrates fast Na + ion transfer kinetics and excellent rate performance, delivering a discharge capacity at 5C that is 60% of that at 0.1C. The DFT calculation confirms that the introduction of titanium effectively reduces the volume change and suppresses the relative slip of adjacent TMO 6 layers. As a result, Ti-doping is instrumental in improving the cycle stability of NFCMT. This work offers a low-cost strategy for constructing high-performance cathode materials for SIBs. offering promising prospects for the development of efficient and affordable energy storage systems.

Modulating the Electrochemical Performances of Layered Cathode Materials for Sodium Ion Batteries Through Tuning Coulombic Repulsion Between Negatively Charged TMO2 Slabs

Using High-Entropy Configuration Strategy to Design Na-Ion Layered Oxide Cathodes with Superior Electrochemical Performance and Thermal Stability

Manipulating Stable Layered P2‐Type Cathode via a Co‐Substitution Strategy for High Performance Sodium Ion Batteries

Promoting Layered Oxide Cathodes Based on Structural Reconstruction for Sodium‐Ion Batteries: Reversible Phase Transition, Stable Interface Regulation, and Multifunctional Intergrowth Structure

Redox and structural stability for sodium-ion batteries through bond structure engineering

Regulation of Coordination Chemistry for Ultrastable Layered Oxide Cathode Materials of Sodium-Ion Batteries

Suppression of Adverse Phase Transition of Layered Oxide Cathode via Local Electronic Structure Regulation for High-Capacity Sodium-Ion Batteries

Lattice regulation strategy for constructing high-rate performance Na0.44Mn0.895Ti0.1Mg0.005O2 sodium-ion batteries cathode materials

Electronic States Tailoring and Pinning Effect Boost High-Power Sodium-Ion Storage of Oriented Hollow P2-Type Cathode Materials.

Engineering Na+-layer spacings to stabilize Mn-based layered cathodes for sodium-ion batteries

Modulating Valence Electrons and Na Occupancy in Layered Cathodes for High-Performance Na-Ion Batteries

Regulation of Coordination Chemistry for Ultra‐Stable Layered Oxide Cathode Materials of Sodium‐Ion Batteries

Air-stable Manganese-Based Layered Oxide Cathode Enabled by Surface Modification and Doping Strategy for Advanced Sodium-Ion Batteries

Stabilizing Transition Metal Vacancy Induced Oxygen Redox by Co2+ /Co3+ Redox and Sodium-Site Doping for Layered Cathode Materials

Expediting Layered Oxide Cathodes Based on Electronic Structure Engineering for Sodium-ion Batteries: Reversible Phase Transformation, Abnormal Structural Regulation, and Stable Anionic Redox

Entropy Strategy for Stabilizing O′3-NaMnO2-Layered Cathodes for Sodium-Ion Batteries

Optimal Ti-Substitution in Layered Oxide Cathodes for Na-Ion Batteries

Synergistic activation of anionic redox through substitution strategy to design low-cost Co/Ni-free layered oxide cathode materials for high-performance Na-ion batteries

Revealing High Na-Content P2-Type Layered Oxides as Advanced Sodium-Ion Cathodes

Topography Control and Component Design Strategies to Enhance Electrochemical Performance of O3-Type Cathode Materials for Sodium-ion Batteries

Unraveling Atomically Irreversible Cation Migration in Sodium Layered Oxide Cathodes