Synergistic activation of anionic redox through substitution strategy to design low-cost Co/Ni-free layered oxide cathode materials for high-performance Na-ion batteries

Ting-Ting Wei,Ying Li,Yu-Hao Chen,Peng-Fei Wang,Ying Xie,Ting-Feng Yi

DOI: https://doi.org/10.1016/j.cej.2023.145844

IF: 15.1

2023-09-06

Chemical Engineering Journal

Abstract:P2-type layered oxides with low Na + diffusion barriers have emerged as promising cathode materials for sodium-ion batteries (SIBs) due to excellent cycle stability and rate performance. Among them, Co/Ni-free Fe-Mn-Cu based cathode materials have gained significant attention owing to their abundance, low cost, and environmentally friendless. However, their practical application has been hindered by irreversible phase changes during the charging/discharging process, leading to rapid capacity decay. To address this issue, the inactive element (Titanium) is introduced in Na 0.70 Fe 0.20 Cu 0.20 Mn 0.60 O 2 oxides to mitigate the detrimental phase transitions and enhance electrochemical performance by facilitating anionic redox reactions. The resulting Na 0.70 Fe 0.20 Cu 0.20 Mn 0.55 Ti 0.05 O 2 (NFCMT-0.05) cathode material exhibits a high initial discharge specific capacity of 186 mAh/g at 0.1C and superior cycling stability, with a capacity retention of 83.5% after 400 cycles at 5C between 2.0 and 4.3 V. Furthermore, the NFCMT-0.05 maintains P2 phase structure throughout the entire sodiation/desodiation process, and the reversible oxygen-related redox reaction provides additional discharge capacity for the Fe-Mn-based cathode above 4.1 V. The NFCMT-0.05 also demonstrates fast Na + ion transfer kinetics and excellent rate performance, delivering a discharge capacity at 5C that is 60% of that at 0.1C. The DFT calculation confirms that the introduction of titanium effectively reduces the volume change and suppresses the relative slip of adjacent TMO 6 layers. As a result, Ti-doping is instrumental in improving the cycle stability of NFCMT. This work offers a low-cost strategy for constructing high-performance cathode materials for SIBs. offering promising prospects for the development of efficient and affordable energy storage systems.

engineering, chemical, environmental