Abstract:Sodium-ion batteries (NIBs) have been selected as a promising candidate for large-scale energy storage systems due to their abundance. Among several NIB cathode materials, P2-type transition metal layered oxides (Na x TMO2, TM = Ti, V, Cr, Mn, Fe, Co, Ni) featuring high theoretical capacity and better rate performance have attracted much attention. However, the practical applications have to endure the low energy density of NIB cathode materials compared to lithium-ion batteries. In tradition, the capacity is constrained by transition metal ions and is closed to their limits. Hence,in order to obtain extraordinarily high capacity in cathode materials, both anionic and cationic redox chemistry are utilized. Nevertheless, their performance is impeded by irreversible structure evolution and lattice oxygen emission. Therefore, it is highly urgent to develop stable anionic redox chemistry for high energy density and long-cycle-life layered oxide cathode materials. In this study, cation-doped Na x Mg y Cu z Mn (1−y−z) O2 cathode material featuring synergistic effects of cationic and anionic redox was reported. By cations doping, the inhibited structure evolution and lattice oxygen stabilization were achieved. Moreover, the effects of cation-doped Na x Mg y Cu z Mn (1−y−z) O2 were also studied by electrochemical measurements. Also, the mechanism of cation-doped NaxMgyCu z Mn (1−y−z) O2 was confirmed by operando synchrotron X-ray absorption spectrum, operando X-ray diffraction, and density functional theory computations. Cation-doped Na x Mg y Cu z Mn (1−y−z) O2 was synthesized through a facile sol-gel method followed by heat treatment. The cation-doped Na x Mg y Cu z Mn (1−y−z) O2 showed high specific capacity (203 mAh g − 1 cycled at 0.1C) as well as better cycling stability, providing sodium layered oxides a new developing stage toward high-performance cathode materials in NIBs for large scale energy storage systems. Keywords: Na-ion batteries, layered oxides, anionic redox, cathode

Tuning anionic redox activity to boost high-performance sodium-storage in low-cost Na0.67Fe0.5Mn0.5O2 cathode

Synergistic activation of anionic redox through substitution strategy to design low-cost Co/Ni-free layered oxide cathode materials for high-performance Na-ion batteries

Simultaneously Enhancing Structural Stability and Cationic Redox in Na<sub>0.67</sub>Mn<sub>0.75</sub>Fe<sub>0.25</sub>O<sub>2</sub> through a Synergy of Multisite Substitution

Tuning Anionic/cationic Redox Chemistry in a P2-type Na0.67Mn0.5Fe0.5O2 Cathode Material Via a Synergic Strategy

Simultaneously promoting the surface/bulk structural stability of Fe/Mn-based layered cathode for sodium ion batteries

Dual-Function of Cation-Doping to Activate Cationic and Anionic Redox in a Mn-Based Sodium-Layered Oxide Cathode

Boosting fast ionic transport and stability of O3-NaNi1/3Fe1/3Mn1/3O2 cathode via Al/Cu synergistically modulating microstructure for high-rate sodium-ion batteries

Unveiling the Complementary Manganese and Oxygen Redox Chemistry for Stabilizing the Sodium‐Ion Storage Behaviors of Layered Oxide Cathodes

Regulating the electrochemical activity of Fe-Mn-Cu-based layer oxides as cathode materials for high-performance Na-ion battery

Enhancing Electrochemical Performance of Sodium-Ion Batteries: Optimal Ca2+ Doping in O3-NaNi0.33Mn0.33Fe0.33O2 Layered Oxide Cathode Materials

Enhancing rate and stability performance of O3-type NiFeMnTi-based layered oxides via Sb/Co dual-doping

High-entropy configuration of O3-type layered transition-metal oxide cathode with high-voltage stability for sodium-ion batteries

A Collaborative Strategy with Ionic Conductive Na2SiO3 Coating and Si Doping of P2-Na0.67Fe0.5Mn0.5O2 Cathode: an Effective Solution to Capacity Attenuation

Cation-Modified Anionic Redox Mechanism for High-Performance Layered Oxide As Sodium-Ion Batteries Cathode Material

Unexpectedly High Cycling Stability Induced by a High Charge Cut‐Off Voltage of Layered Sodium Oxide Cathodes

Stabilized O3‐Type Layered Sodium Oxides with Enhanced Rate Performance and Cycling Stability by Dual‐Site Ti4+/K+ Substitution

Suppressing the dynamic oxygen evolution of sodium layered cathodes through synergistic surface dielectric polarization and bulk site‐Selective Co‐doping

Precisely Modulating the Structural Stability and Redox Potential of Sodium Layered Cathodes Through the Synergetic Effect of Co-Doping Strategy

Tuning Anionic Redox Activity and Reversibility for a High‐Capacity Li‐Rich Mn‐Based Oxide Cathode via an Integrated Strategy

Stabilizing oxygen redox reaction in phase-transition-free P2-type Co/Ni-free cathode via Cu doping for sodium-ion batteries

NaTiOx‐modified high‐nickel layered oxide cathode for stable sodium‐ion batteries