Abstract:Cogging torque results in speed and torque ripple in permanent magnet synchronous motors (PMSMs), thereby leading to undesirable vibration and acoustic noise. By analyzing the expression of cogging torque, the main parameters that affect the cogging torque are determined as the harmonic of air-gap permeance and air-gap flux density. The methods involving stator auxiliary slots and optimization of pole-arc coefficient are used to alter the two parameters to reduce the cogging torque. Taking a typical interior permanent magnet synchronous motor (IPMSM) as an example, the effects of the number, position, and size of auxiliary slots on cogging torque are analyzed. Additionally, the effect of the pole-arc coefficient on cogging torque is analyzed, and the optimal pole-arc coefficient that can effectively reduce cogging torque is calculated. Meanwhile, in order to ensure the output performance of the motor, an evolutionary algorithm (EA) is adopted to optimize the rotor structure. The results show that without compromising the motor performance, cogging torque and torque ripple are significantly reduced, and the waveform of the line-line back electromotive force (EMF) becomes more sinusoidal, which effectively enhances the output performance of the motor. Finally, based on the optimized structural parameters, a prototype is manufactured, and the accuracy of the optimized results is verified by experiments.

Phase Angle of Cogging Torque of Fault-Tolerant Permanent Magnet Machine With Single Slot

Analytical Cogging Torque Prediction for Surface-Mounted PM Machines Accounting for Different Slot Sizes and Uneven Positions

Reduction Methods Using Canceling Effect for Cogging Torque in Dual-Stator PM Synchronous Machines

Influence of Pole and Slot Number Combinations on Cogging Torque in Permanent-Magnet Machines with Static and Rotating Eccentricities

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Superposition Method for Cogging Torque Prediction in Permanent Magnet Machines with Rotor Eccentricity

Influence of Stator Asymmetry on Cogging Torque of Permanent Magnet Brushless Machines

Optimal Split Ratio in Fractional-Slot Interior Permanent-Magnet Machines With Non-Overlapping Windings

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Influence of Stator Topologies on Average Torque and Torque Ripple of Fractional-Slot SPM Machines with Fully Closed Slots

A Novel Dual Permanent Magnet Fault-Tolerant Vernier Machine with Hybrid Stator Configuration

Study of magnet shifting for reduction of cogging torque in permanent magnet motors

Analytical Analysis of Cogging Torque in Permanent Magnet Machines With Unequal North and South Poles, with Particular Reference to Consequent Pole Machines

A Novel Structure of Doubly Salient Permanent Magnet Machine

Optimization of the Different Pole Arc Combination to Reduce the Cogging Torque in PMDC Motors

Research on cogging torque characteristics of permanent magnet synchronous machines with the same number of poles and slots

The Optimal Design Method of Pole Arc Coefficient for Reducing Cogging Torque of Surface Permanent Magnet Generator

Analyze and Design of Six Phase Fault-Tolerant PMSM with Novel Slot Opening Distribution

Research on Cogging Torque Reduction Based on Multi-Parameter Optimization of Auxiliary Slots and Pole-Arc Coefficient

Design and test of torque adjustment system of five-phase fault-tolerant permanent-magnet machine

The Application of Magnet Structures to Reduce the Cogging Torque Associated with Fractional Slot Number in Permanent Magnet Generators