Abstract:Indentation analysis in multilayer composite sandwich panels. This study examines the effects of multilayering in sandwich panel composite structures with different corrugated core configurations under quasi‐static indentation loading. The panels were fabricated using woven glass fibers and epoxy resin via the Vacuum Infusion Process. Experiments were conducted using two hemispherical cylindrical indenters with a diameter of 20 mm (ID = 20 mm) and 10 mm (ID = 10 mm) and the behavior of the composite structure in terms of contact force and fracture mechanisms for different core corrugations (square and butterfly) were investigated in two ways with foam and without foam. The experimental results demonstrate that, among corrugated core geometries without foam, butterfly cores outperform square cores in terms of structural strength, maximum force, moment force, energy absorption, specific energy absorption, and displacement until full indentation. Moreover, the butterfly core shows a higher peak load and different failure mechanisms compared to the square core. Under loading with a 10 mm indenter, the butterfly core without foam only experienced perforation in the loading area, without fracture completely. Also, adding foam did not change failure mechanisms and mechanical behavior in the butterfly geometry. However, in the square geometry, foam filled gaps between the core, preventing fracture completely and leading to only perforation in the loading area, unlike the specimen without foam. The visual analysis during the quasi‐static indentation process revealed several significant damage mechanisms, including matrix cracking, fiber breakage, delamination, buckling and crushing of cell walls, damage to top sheets, core separation, and complete indentation of the samples. Highlights Delamination and indentation failure mechanisms were seen on the butterfly core. Skin indentation and rib fracture failure mechanisms were seen on the square core. Butterfly corrugated cores revealed the best performance without/with foam. The core shape was more effective on the strength than the foam addition.

Indentation of Metal Foam Core Sandwich Beams: Experimental and Theoretical Investigations

Indentation of sandwich beams with metal foam core

Localized Indentation of Sandwich Beam with Metallic Foam Core

Localized Indentation of Sandwich Panels with Metallic Foam Core: Analytical Models for Two Types of Indenters

Indentation Behavior Of Sandwich Structures With Metallic Foam Core

Plastic analysis of metal foam core sandwich beam transversely loaded by a flat punch: Combined local denting and overall deformation

Analytical solution for pin-supported metal foam core sandwich beam with local denting

A New Indentation Model for Sandwich Circular Panels with Gradient Metallic Foam Cores

Low-velocity Impact Response of Sandwich Beams with a Metal Foam Core: Experimental and Theoretical Investigations

Indentation of Composite Sandwich Panels with Aluminum Foam Core: an Experimental Parametric Study

Large Deflections of Multilayer Sandwich Beams with Metal Foam Cores under Transverse Loading

The Failure Behavior of Geometrically Asymmetric Metal Foam Core Sandwich Beams under Three-Point Bending

Three-point Bending of Physically Asymmetric Metal Sandwich Beams with Aluminum Foam Core: Failure Behavior and Optimal Design

Failure Analysis of Sandwich Beams under Three-Point Bending Based on Theoretical and Numerical Models

The Failure Behavior of Double-Layer Metal Foam Sandwich Beams under Three-Point Bending

Quasi-Static Indentation Behavior of Honeycomb Sandwich Materials and Its Application in Impact Simulations

Plastic behavior of sandwich beams with fiber metal laminate face-sheets and metal foam core: Combined local denting and overall deformation

Low-Velocity Impact Response of Fully Clamped Metal Foam Core Sandwich Beam Incorporating Local Denting Effect

Plastic Analysis of Multilayer Sandwich Beams with Metal Foam Cores

Modeling and Failure Analysis of Elastic-plastic Sandwich Beams

Experimental analysis of quasi‐static indentation in composite sandwich multilayers with corrugated core