Abstract:The large deflections of slender ultralight sandwich beams with a metallic foam core are studied under transverse loading by a flat punch, in which interaction of bending and stretching induced by large deflections is considered. Firstly, a unified yield criterion for metallic sandwich structures considering the effect of core strength is proposed, which is valid for metallic sandwich cross-sections with various core strengths and geometries. This can reduce to the yield criterion for a solid monolithic cross-section and the classical yield criterion for sandwich cross-sections with a weak core, respectively. Then, analytical solutions for the large deflections of fully clamped and simply supported metallic foam core sandwich beams are derived under transverse loading by a flat punch, respectively. Comparisons of the present solutions with experimental results are presented and good agreements are found. The effects of the core strength, the size of loading punch and the boundary conditions on the structural response of sandwich beams are discussed in detail. It is shown that the axial stretching induced by large deflections has significant effect on the load-carrying and energy absorption capacities of sandwich structures in the post-yield regime, and the load-carrying and plastic energy absorption capacities of metallic foam core sandwich beams may be underestimated as the core strength is neglected in analysis, especially for the sandwich beams with a strong core.

Analytical solution for pin-supported metal foam core sandwich beam with local denting

Plastic analysis of metal foam core sandwich beam transversely loaded by a flat punch: Combined local denting and overall deformation

Low-Velocity Impact Response of Fully Clamped Metal Foam Core Sandwich Beam Incorporating Local Denting Effect

Large Deflections of Multilayer Sandwich Beams with Metal Foam Cores under Transverse Loading

An Analytical Solution for the Large Deflections of a Slender Sandwich Beam with a Metallic Foam Core under Transverse Loading by a Flat Punch

Low-velocity Impact Response of Sandwich Beams with a Metal Foam Core: Experimental and Theoretical Investigations

Indentation of sandwich beams with metal foam core

Large Deflection Of A Pin-Supported Slender Geometrically Asymmetric Sandwich Beam Under Transverse Loading

Localized Indentation of Sandwich Beam with Metallic Foam Core

Indentation of Metal Foam Core Sandwich Beams: Experimental and Theoretical Investigations

Plastic Analysis of Multilayer Sandwich Beams with Metal Foam Cores

Plastic behavior of sandwich beams with fiber metal laminate face-sheets and metal foam core: Combined local denting and overall deformation

Analytical Solution for the Large Deflection of Fully Clamped Metallic Foam Sandwich Beam

Low-velocity impact of sandwich beams with fibre-metal laminate face-sheets considering local denting effect

Three-point Bending of Physically Asymmetric Metal Sandwich Beams with Aluminum Foam Core: Failure Behavior and Optimal Design

Lateral Plastic Behaviour of Rectangular Sandwich Tubes Considering Local Denting

Failure Analysis of Sandwich Beams under Three-Point Bending Based on Theoretical and Numerical Models

A simplified analytical model for metal sandwich beam with soft core under impulsive loading over a central patch

Plastic Behavior of the Foam-Filled Sandwich Beam with Circular Tube Core under Transverse Loading

Dynamic Response of Slender Multilayer Sandwich Beams with Metal Foam Cores Subjected to Low-Velocity Impact

Indentation Behavior Of Sandwich Structures With Metallic Foam Core